wires it's shit in this video, better with iDE Resurrector, at the time of the video, "real" HDMI mod doesn't exist. I have done check here x.com/Gusse__/status/1748628084738191670?s=20
Dude I just sd card modded my ps2 slim scph90004 with an adapter but now there is no video output but there is power. The fan spins and the power light also comes up. Please help me 😭😭😭🙏🙏
hello ! based on my knowledge, unfortunately only SCPH-70xxx can be modded for HDD mod, because other later revision doesn't have the ide controller on motherboard
Greetings. Question: Are 256 and 512 GB SD cards supported? I ask because I encountered a software limitation of up to 128 GB. That is, as the card fills up, OPL does not see new recorded games, the old ones (which were before) start normally.
The se card adapter used in this video doesn’t support lba48, it’s that why you can’t fill up to 137gb. There is other mod you can do with SATA adapter to bypass all limitations, another it’s iflash that I have done on some console, but sd card on market actually are up to 1,5tb and they are expensive
And i thought the Xstation Mod i just did for my ps1 was hard :O I think ill just do the ModBo 5.0 mod for my ps2 and just burn the backups as this is Beyond BOSS LVL difficulty to me.
nope ! I have made 3D printed part to fix the screw i.etsystatic.com/34774323/r/il/41ba1f/3785467630/il_1140xN.3785467630_egtq.jpg It’s prototype one, other fix are cleaner 😉
hello. Tell me what you need to write to the memory card to run opl like you do? I also have everything chipped and the adapter is installed on the sd card, but I can not make mod bo5 run directly opl from the memory card.
I use matrix installer from usb or mc on ps2 to install the .elf (opl here) you want on Sd (dev2) after have formated Sd with hdd manager from ulaunch.elf Hope it you 😉
@@AndyLight_Retro here is a link from my website : gusse.fr/28-BIT-DEV2-INSTALL-OPL.zip hope it's help you ;) have take a lot of time to find the process to do that
@@Gusse Fabulous! Everything worked out! Thank you so much, I've been looking for a solution to this problem all day and only you really helped me! Thanks again, I wish you good health and good luck!
That network resistor array is so annoying and I’ve destroyed a few boards attempting this by melting them off. I wonder, if this will work if I replace them with 10k resistors On the sd adapter
Did you have schematic diagram for flexible power/reset button, trying replace 3 flexible, 3 pcb button still not working (sometimes its turn on greenif put some right potition but) So i broke it because angry 😅 maybe if i jumper it from pcb ps2 to pcb power button will work
Sorry, I haven’t schematics for that, but with a multimeter you can find the corresponding trace and make direct wire. I have done that in the past and work pretty well.
@@Gusse i tried with 0,1mm jumper wire its work but the light dim and not working when i push it so i switch the cable with more thicker but the light not turn on anymore 😅 I'll try again next with cable like on the video
Awesome work! I just completed this mod myself and was able to format my SD card using Ulaunchelf but now my computer won’t recognize the sd card. Have you ever seen this happen or perhaps know what my issue could be?
With modchip I can direct boot in opl quickly, and use the console without memory card, but the first reason is…. I do that for fun and love of old soldering technic. It’s work without modchip and only fmcb yes 👍
excellent video my friend gusse, I need to ask you something about this mod, I have the ps2 slim model 70012 i want to make this mod but I will use an ide 2.5 hdd but i dont have the schematic for that type of hdd due this hdd is from an old laptop, please help me bro.
Я на 7000-й версии пс 2 слим реализовал иде-сд адаптер (распаял проводами чуть толще волоса) все проводки уложил как с картинки аккуратно красиво и вывел на переднюю панель гнездо для микро сд и там-же индикации загрузки флешки и работы иде адаптера и ничего не резал совсем с первого взгляда и не понять что с приставкой что-то не то да и вообще не понять если не показать флешка на 128г самсунг синий. чип впаял модбо 5. привод дисков сохранён и к тому-же читает всё и вся сама приставка в идеальном виде и состоянии и вся работа проведена аккуратно до самых мелочей. Фото работ всех имеется пока болел (чем-то надо было заняться) 3 дня и ночи я всё это мутил. Также имеются адаптеры для джойстиков блюретро и пс 4 джойстики. Вопрос если способ загружаться с free hdd boot на пс 2 слим 7000 ??? в модбоо 5 в меню выбираю загрузиться с hdd при загрузке консоли чёрный экран и ничего не происходит.
Hi! Sorry, I'm not a Russian speaker, and with the help of a translator I'm not sure I understand what you mean. Do you have a black screen problem when you install as I understand it?
@@Gusse The question is, is there a way to boot from free hdd boot on ps 2 slim 7008??? In modboo 5 I select boot from hdd in the menu, but when the console boots, the screen is black and nothing happens.
@@Mypka-Abs oh ok I understand better ! FreeHDDBoot is not compatible with bios revision of PS2 Slim. But you can use matrix dev2i.elf installer to installer the app you want in dev.2 boot sector and allow to boot directly with modbo 5.0 dev.2 option to boot ;) Depending on the mod you do, SATA mod or SD Card mod, the console can't boot on some SSD with SATA Mod. With SD Card mod, I manage to boot each time directly on the SD Card with modbo dev.2 boot mode.
@@Gusse I have installed SD-IDE 2.5 inches, 44 pins, SDHC/SDXC/MMC-IDE Samsung pro plus flash drive 128g The flash drive is installed in the ventilation hole on the outside of the console, from the front it looks like it came from the factory, nothing is cut out, the slot for the flash drive is installed in the console as expected. in the modboo 5 menu I selected the option to boot from hdd dev2, but the console only shows a black screen when loading FreeHDDBoot onto a flash drive, but only a black screen and that’s it.
@@Gusse I could show you my work on PS 2, I have high-quality photographs of my work from all processes and angles of PS2, I did everything very well and beautifully and technologically.
Please check this most recent video, th-cam.com/video/R4E7dATUtTM/w-d-xo.html, based on a flex cable of my own making available on gusse.in
Beautifully done.
I've been meaning to give this a shot. V12s are super common when buying japanese lots :D
Do you have links to diagrams and the parts used for this mod? (the two sd adapter boards)
@@ModzvilleUSA thanks !
I only have diagram for ide adapter to PS2 v12,
For the two board, it’s just a straight forward wiring to micro Sd adapter 😉
One of the coolest PS2 mods I’ve ever seen, genius.
thanks !! check this one if you enjoy th-cam.com/video/ZB05cdnxNgE/w-d-xo.html ;)
Clean work. Found this video from your ebay listing.
ancora più perfetta con un hdmi mod però top davvero
wires it's shit in this video, better with iDE Resurrector, at the time of the video, "real" HDMI mod doesn't exist. I have done check here x.com/Gusse__/status/1748628084738191670?s=20
Dude I just sd card modded my ps2 slim scph90004 with an adapter but now there is no video output but there is power. The fan spins and the power light also comes up. Please help me 😭😭😭🙏🙏
It’s hard to troubleshoot by comments… check ps2 palace forum, they could help you
Yoo keep it up man. But can I just do this with a regular micro sd card adapter that we use to do an mc2sio?
yes you can ;) it's basic hardware ;)
i am so amazed..very clean..great job..
thanks dude ! check my latest videos, they are better
good afternoon how to install hd ide on ps2 slim scph-75001 the motherboard is GH-040-12
hello ! based on my knowledge, unfortunately only SCPH-70xxx can be modded for HDD mod, because other later revision doesn't have the ide controller on motherboard
Greetings. Question: Are 256 and 512 GB SD cards supported? I ask because I encountered a software limitation of up to 128 GB. That is, as the card fills up, OPL does not see new recorded games, the old ones (which were before) start normally.
The se card adapter used in this video doesn’t support lba48, it’s that why you can’t fill up to 137gb. There is other mod you can do with SATA adapter to bypass all limitations, another it’s iflash that I have done on some console, but sd card on market actually are up to 1,5tb and they are expensive
Where can i get the schematic diagram soldering the sd adapter and the modbo..?
here circuit-board.de/forum/index.php/Thread/16212-PS2-Slim-SCPH-7000x-Serie-mit-SD-Karte-betreiben/
And i thought the Xstation Mod i just did for my ps1 was hard :O
I think ill just do the ModBo 5.0 mod for my ps2 and just burn the backups as this is Beyond BOSS LVL difficulty to me.
How Convert the PlayStation 2 arm into usb
😅
Heyy! Nice work!! Btw What series of ps2 can be sd-modded?
Thanks ! SCPH70xxx can be modded for slim model, greater model Sony remove IDE controller from motherboard to reduce production cost
Do you reinstall the bottom metal shield when you reassemble the PS2?
nope ! I have made 3D printed part to fix the screw
i.etsystatic.com/34774323/r/il/41ba1f/3785467630/il_1140xN.3785467630_egtq.jpg
It’s prototype one, other fix are cleaner 😉
hello. Tell me what you need to write to the memory card to run opl like you do? I also have everything chipped and the adapter is installed on the sd card, but I can not make mod bo5 run directly opl from the memory card.
I use matrix installer from usb or mc on ps2 to install the .elf (opl here) you want on Sd (dev2) after have formated Sd with hdd manager from ulaunch.elf
Hope it you 😉
@@Gusse thanks for the answer. Can you give me a link to download the matrix installer application, I will be very grateful!
@@AndyLight_Retro here is a link from my website : gusse.fr/28-BIT-DEV2-INSTALL-OPL.zip
hope it's help you ;) have take a lot of time to find the process to do that
@@Gusse Thanks for the link, I understand that you need to run DEV2I.ELF and wait?
@@Gusse Fabulous! Everything worked out! Thank you so much, I've been looking for a solution to this problem all day and only you really helped me! Thanks again, I wish you good health and good luck!
That network resistor array is so annoying and I’ve destroyed a few boards attempting this by melting them off. I wonder, if this will work if I replace them with 10k resistors On the sd adapter
Sorry guy I can’t give you a 100% sure answer but you can try …
@@Gusse it’s all good. What temp are you using for your soldering iron?
@@OnTheEdgex23 generally 400°c it’s good enough
@@Gusse one last question. What type of solder are you using, and what size. I have Lester 60/40z it’s great however the diameter is pretty huge
@@OnTheEdgex23 I have no exact information about it, it's very thin solder wire
Did you have schematic diagram for flexible power/reset button, trying replace 3 flexible, 3 pcb button still not working (sometimes its turn on greenif put some right potition but)
So i broke it because angry 😅 maybe if i jumper it from pcb ps2 to pcb power button will work
Sorry, I haven’t schematics for that, but with a multimeter you can find the corresponding trace and make direct wire. I have done that in the past and work pretty well.
@@Gusse i tried with 0,1mm jumper wire its work but the light dim and not working when i push it so i switch the cable with more thicker but the light not turn on anymore 😅
I'll try again next with cable like on the video
What kind of glue do you use to glue the wires?
Loctite super glue my friend ;)
Awesome work!
I just completed this mod myself and was able to format my SD card using Ulaunchelf but now my computer won’t recognize the sd card.
Have you ever seen this happen or perhaps know what my issue could be?
it's normal ! ulaunch format the SD Card in a RAW format, and you need to use soft like hdldump to add games on your SD Card ;)
@@Gusse haha wow probably sat at this stage for a month now trying to figure that part out. Thanks so much, that worked!
@@VLorenscheit cool !
do you need a modchip installed for this or will an FMCB memory stick be enough?
With modchip I can direct boot in opl quickly, and use the console without memory card, but the first reason is…. I do that for fun and love of old soldering technic. It’s work without modchip and only fmcb yes 👍
pcb mini sd? compatible micro sd?
I'm not sure to understand but the answer is probably yes
You have to find diagrams to make connections matching between both connectors
boa tarde tem como instalar hd ide no ps2 slim scph-75001 a placa mae e GH-040-12
Sony removed iDE component on motherboard after SCPH700xx
Hello! Please tell me what cable you are using and what kind of glue?
Hello ! in this video, Chinese AWG30 en Loctite SuperGlue
@@Gusse, thank you!
excellent video my friend gusse, I need to ask you something about this mod, I have the ps2 slim model 70012 i want to make this mod but I will use an ide 2.5 hdd but i dont have the schematic for that type of hdd due this hdd is from an old laptop, please help me bro.
Hello dude
Thanks you !
The schematics may the same than the one I use 😉
You are out of your mind charging 30 eur for a single flex cable.
Я на 7000-й версии пс 2 слим реализовал иде-сд адаптер (распаял проводами чуть толще волоса) все проводки уложил как с картинки аккуратно красиво и вывел на переднюю панель гнездо для микро сд и там-же индикации загрузки флешки и работы иде адаптера и ничего не резал совсем с первого взгляда и не понять что с приставкой что-то не то да и вообще не понять если не показать флешка на 128г самсунг синий. чип впаял модбо 5. привод дисков сохранён и к тому-же читает всё и вся сама приставка в идеальном виде и состоянии и вся работа проведена аккуратно до самых мелочей. Фото работ всех имеется пока болел (чем-то надо было заняться) 3 дня и ночи я всё это мутил. Также имеются адаптеры для джойстиков блюретро и пс 4 джойстики. Вопрос если способ загружаться с free hdd boot на пс 2 слим 7000 ??? в модбоо 5 в меню выбираю загрузиться с hdd при загрузке консоли чёрный экран и ничего не происходит.
Hi! Sorry, I'm not a Russian speaker, and with the help of a translator I'm not sure I understand what you mean. Do you have a black screen problem when you install as I understand it?
@@Gusse The question is, is there a way to boot from free hdd boot on ps 2 slim 7008??? In modboo 5 I select boot from hdd in the menu, but when the console boots, the screen is black and nothing happens.
@@Mypka-Abs oh ok I understand better !
FreeHDDBoot is not compatible with bios revision of PS2 Slim. But you can use matrix dev2i.elf installer to installer the app you want in dev.2 boot sector and allow to boot directly with modbo 5.0 dev.2 option to boot ;)
Depending on the mod you do, SATA mod or SD Card mod, the console can't boot on some SSD with SATA Mod. With SD Card mod, I manage to boot each time directly on the SD Card with modbo dev.2 boot mode.
@@Gusse I have installed SD-IDE 2.5 inches, 44 pins, SDHC/SDXC/MMC-IDE Samsung pro plus flash drive 128g The flash drive is installed in the ventilation hole on the outside of the console, from the front it looks like it came from the factory, nothing is cut out, the slot for the flash drive is installed in the console as expected. in the modboo 5 menu I selected the option to boot from hdd dev2, but the console only shows a black screen when loading FreeHDDBoot onto a flash drive, but only a black screen and that’s it.
@@Gusse I could show you my work on PS 2, I have high-quality photographs of my work from all processes and angles of PS2, I did everything very well and beautifully and technologically.
Can you please tell me the info on the wire you used for this.
Good morning ! it's AWG30 bought in China, the insulation is not really heat resistant and is quite thick
@@Gusse Can you please give some info on the glue you are using.
@@finalmanfinalman3223 i use superglue (loctite) but all liquid glue can do the job
@@GusseHow thick are the cables?
@@alexg7401 like I said previously it’s AWG30 so by Google it’s Ø 0.55 mm
this is shlyappa and fuflo
if you say so...
@@Gusse say so otsoso