EASY REMOVAL OF RV OR CAMPER ANTENNA rV roof patch hole repair with aluminum sheet more roof space

[@woobang77]

Finally a video that's to the point! Instead of a 48 minute video but they're talking for 47 minutes before they actually get to the point!

[@shannonroy7048]

Thank you that answered all my questions short and simple but straight to the point

[@nm3547]

Best and seemingly accurate method. Thanks so much for being straight to the point and aware.

[@arambulunmaz9173]

that is CRAZY to drill many holes to attach a flat plate to the roof.

[@RogerSayers]

Awesome job! Thanks for sharing

[@markmccormick9028]

Thanks for this video I got my grand parents RV fixed after a trip back from the coast with the batwing up I used every step here.....

[@BurtBowers]

Looks good, I am wanting to get rid of antena as well though going to put new roof membrane on what do you suggest using flat piece sheet metal & just glue it down over the hole before laying down the roofing membrane?

[@AubriAwesomness]

Searched everywhere for a video and finally! Thanks so much for posting.

[@beckyjackson9555]

Thanks for this! After you scraped off the excess butyl tape around the edges what did you clean the surface with? Acetone? Mineral spirits? Denatured alcohol?

[@DesertSandsVintageTrailerPark]

Becky Jackson I used alcohol

[@beckyjackson9555]

@@DesertSandsVintageTrailerPark Thanks! One more question... will this work on a rubber roof?

[@DesertSandsVintageTrailerPark]

@@beckyjackson9555 I would try and find the similar material to your rubber roof, cut out a small square to cover the area then use Eternabond tape

[@torawfordiz]

Any idea what type of screws were used for the metal plate? Also what kind of poodie was that used to bond the plate to the roof and hopefully help keep leaks out

[@robperkins2674]

Perfect

[@Xenuear]

Whats the gray gooop at the 1min mark? Im gonna use liquid nail construction weatherproof adhesive i think

[@cmast86]

Butyl Tape. Supposed to be in any seem where there are screws (or rivots).

[@alexandriadavenport313]

Is that aluminum? How thick? Thanks for the video!

[@DesertSandsVintageTrailerPark]

I don’t remember how thick but something pretty thin will work

[@TheDan2b2]

@@DesertSandsVintageTrailerPark Where would one get an aluminum sheet? Home Depot?

[@steverides4636]

What size drill bit and rivet size?

[@jet0577]

Sweet. Come do ours!

[@Kirkbdavis]

Easy Peezy

[@peggywildsmith6002]

What about the inside? What do you do there?

[@DesertSandsVintageTrailerPark]

Sorry I forgot to show that. I got some white plastic and cut it into a circle and stuck it on with glue.