Happy New Year, folks! I feel your frustration, Matt. FWIW, I had to make a similar announcement every year as a middle school band director on how NOT to destroy your instrument! You’d be amazed at the many imaginative ways students (and parents, mainly MANLY dads) irretrievably mangled their instruments. One year, I had a macho dad try to pull a stick mouthpiece from a trumpet by clamping the whole thing in his vice grip, and pulling with his Robogrip pliers. The mouthpiece stayed in the leadpipe, but he ripped the leadpipe and tuning slide branch right off the horn, and crushed the valve assembly to boot. The thing was literally ripped in half. Seriously, I have a specialized mouthpiece puller that would have done it safely in 5 seconds. But noooo - trumpet destroyed! 😖
I'm proud of my safety razor hobby and thanks to channels like this, the hobby will be preserved until well after I die. (And that's a long long time!)
Possible number 11. Dont overtighten when you change blades. A lesson learned from experience. . . . I pulled the threaded piece from the cap on a DE89.
Thanks, Matt. These are awesome tips. You probably (hopefully) just saved a large number of vintage, never to be made again razors, from destruction. This video is a must watch for all wet shavers.
I find shaving to be a therapeutic ritual that was passed down by my grandfather and father, I would sit on the toilet seat and watch while getting good life advice when I was a child. Seeing the brush and lather, how their faces would go from scruff to smooth, and those classic scents that I now use myself. I hope to pass this ritual down to my son when it’s his turn, currently he’s in the “daddy what’s that” stage as a 2.5 year old, so life advice will have to wait for a few years. I’ve had the same razors for a few years and cycle through them regularly, although I make sure they dry out, I take a dedicated tooth brush and dish soap to scrub them and dry them with a microfiber cloth once a week. They all pretty much look like they’re new, and look fantastic on my restroom counter.
Had to save this video... even though I wouldn’t do some of these, but I often wondered how you would clean a vintage razor. Learned something new today. Thank you!
One of my shavers is an old 1960 Gillette Fatboy that used to be my dads. I did hose mine down with WD40 because I wanted it to get it down in the handle and not only lube up the moving parts but also help remove mineral deposits. I was amazed at how smooth it worked after that. Did I use it to shave right after hosing it down with WD40? No, I took a toothbrush and some warm water and used some dish soap and cleaned it. After rinsing it off I put it in a stand with the butterfly wings open to let it dry. I also remove the blade and give it a spritz of Clean Shower to prevent mineral deposits and stick it to a little magnet to dry. I also have a Vikings Blade Emperor which I clean with the toothbrush and some dish soap and that keeps it looking as good as when it came out of the box. Using these old technology shavers to shave with now is much more enjoyable than using the modern cartridge style razors.
"Let it breathe" I guess that some people are minimum just lazy. After every shave I open my razors and throughly clean them. I love getting every day my beautiful and sparkling razor and shave uninteropted by anyone.
Meh. These things have been in use for over 100 years. "The men who built America", the men who fought on both sides of two world wars, the men who landed on the moon. Collecting old ones IS a fun hobby and part of the fun is babying them. But to 100's of millions of men it's just a tool, not a hobby. They were built to be durable.
@@MossJenks yes you are right, if we would all, be rich. But if you spend a lot, of your hard earn money, you don't see it as a tool anymore and it becomes your "baby"
For the past 9 years I went to the barbershop so they do my beard that being said, today I shaved myself with disposable razors, the feeling of shaving again for almost ten years it's weird. So I went bananas on the internet and buy a Vikings blade emperor emoji or something like that, I hope to get it on Friday or Saturday, but watching all the cares that takes kinda reminds me why I decided to someone else take care for my beard .... Wish me luck
I recently obtained another British Aristocrat Junior at a Flea market. It was very dirty and stiff to open. I put a drop of Dawn detergent inside and then soaked it for an hour in hot water and Dawn. Stiffness was gone and a little scrub with tooth paste and it's like brand new! Happy New Year and thanks for all the great videos!
I'm glad I watched this video. I am guilty of using Barbicide. I also need to let my current razors breathe by loosening the blade as you show. I have not done the other 8 razor-destroying things. I am expecting the get a "revamped" razor back from your service next week. I now understand I need to avoid the Barbicide totally and make sure I loosen the blade between shaves and let the finish breathe. Thank you very much for posting this.
Been watching your channel for a long time. I can remember when you used to say flitz was fine to clean with and also you could put your razor in the dishwasher to sterilize it. I guess we all learn over years and experience. Thanks for all your great video's and look forward to many more! I wish you and yours a Very Happy New Years!
I gave that caveat in today's video that I had said it in the past. Both flitz and dishwashers are safe if many precautions are in place. Remember the topic today was how to not destroy your razor. Both methods of cleaning can be safe but also can cause harm.
Me too! I watched these videos in the wrong order. Took Matt’s advice Went out and bought a bottle of Flitz just a couple days ago tried it and wasn’t too impressed. Then today I watch this video and Matt distinctly says” Don’t use Flitzs” Oh well, that’s how it goes sometimes.😂
Such a phenomenal review of what not to do. 😁 I’m really glad I listened prior to receiving my reconditioned replated nickel Fat Boy. And I took your advice, I do clean and dry the razor & blade each time I use it. The tip to leave the razor blade loose between uses was brilliant. 😁 just one of your million of fans.
I'm glad that I watched this video I just got a brand new parker 99r and I want to take good care of it and now I know that after I shave to remove the blade so it doesn't leave marks on the razor
I read from a few razor instructions not to screw your handle too tight, especially on an adjustable. It may wear the threading. Hope you have a good year Matt!
I've made some of those mistakes, but have not done any significant damage on my razors. My cleaning routine is basically an old toothbrush and liquid had soap. Works great. For the blade, I simply have a magnetic base on my bathroom mirror and put the blade there to air dry. Never had issues with blades rusting on my razors.
Loved this, Matt; thank you! I take the blade out after every shave and "pat" it dry (no rubbing, just literally laying the blade in a towel and covering it with another part of the towel to soak up the water). Then I put it back in the wrapper. My razor, I leave loose -- butterfly's are open all the way and three-pieces are not even tightened down even one turn. I've not had any issues with rust or discoloration. I have, however, boiled an old Gillette adjustable. It was like someone had poured molasses down it! When I boiled it, all this grease appeared on the surface of the water; it was disgusting. Of course, now I'm thinking that it might have been some coating on the razor (but these were nichol so, perhaps not). Anyway, I just shipped my Christmas present to you (it arrived New Year's Eve) for revamping! I'm so excited. It's my birth year _and_ quarter! It's a K3 Slim Adjustable. I can't hardly wait!!!
Excellent advice! I just got a 1955 Gillette flare tip in excellent mechanical condition but it was covered in years of neglect and soap scum. After cleaning it with hot water, dishwasher liquid and an old toothbrush it cleaned up nicely. I then simply buffed the cap with an old sock and it shined right up! Thanks for confirming my thoughts on boiling the razor or using abrasive polishing compounds. It's simply not necessary.
I just bought a late 50s English Gillette flare tip Rocket two days ago. Found it on the back of a shelf of junk in an antique store in perfect condition but it could still use a good cleaning. Think I'll give it a gentle scrub today with some Dawn dish detergent and a soft toothbrush and then buff it with an old sock. Thanks for the tips!
27 here, not a big shave geek, but today I bought the Ambassador off the WCS site with a few intro blade packs. We’ll see it if lasts till I’m a geezer :) I’ll unscrew and air it out often.
I just bought my first vintage razor, a fatboy from ebay and I'm waiting for it to arrive. I'm glad I watched this video because I was literally going to do almost everything you said not to. LMAO
Happy New Year!!! Thanks for confirming that I'm smarter than I thought. Never used Barbicide or metal polishes. I've always dried my blade after every shave and I clean my razor using an old toothbrush and dish detergent when needed. Food-safe mineral oil is the only lubricant I use.
I have ruined so many razors. Especially with herbicide and metal polish. I have probably done all of these things except the hammer! And, I can attest to the fact your batting 100% on you assessment. I only wish I had this 15 years ago when I Came down with RAS (razor acquisition sickness). The herbicide really screwed up my adjustable razors. I have 3 or 4 Slims that hardly turn closed. Thanks for another great video Matt. You are the Best at what you do!!
Very informative and saved me from the Barbicide mistake...lol I always take the blade out and wash and dry mine in a clean towel after every use. Occasionally wipe it down with rubbing alcohol since I had a few, bitter, rounds with Staph infection over the years.
Great video, very informative, thanks! So many great tips. Glad to know loosening the cap, on days I don’t remove a blade all the way is technically the right thing.
After every use I always disassemble a razor, rinse off all parts and dry with a towel. Never had any issues with dirt, apart from some soaps maybe in the guard holes. But then a toothbrush and some dishwasher liquid will take care of that. That’s all I have to do to keep my razors in good condition.
Matt👍👍💈 Happy New Year bro. OK you got me, I usually do the Dawn and toothbrush routine first, then a quick soak in sterilizer/alcohol. Just a 10 minute soak then rinse and dry. The rest of these items I haven't done except for the Flitz wipe down which took the gold finish right off a 1920's/30's New short comb top cap, lesson learned. Great video and tips, thanks. I can only imagine what you have seen come into your shop for repairs, good laughs and head shaking. I will admit to using an ultrasonic cleaner with mild cleaner, so far so good. Enjoy!
Hi Matt- Great video on razor care do’s and don’ts. Luckily I have a few RE polishing cloths which are great. I did have a question about sonic cleaners, please. I’m thinking of this in particular for the Shick injector-type razors where the metal head is formed by folding a few layers of metal on itself. It’s very difficult to really clean those areas. Running a razor through the sonic cleaner with warm water and some anti-bacterial soap seems like it might be an answer for this specific razor. I would greatly appreciate your thoughts, please. Wishing you and your family a very Happy New Year! All the best in 2021, Matt!
I so glad that I watched some of your previous videos before I refurbished my Grandfather's Gillette Super Speed DE Safety Razor Red Tip. I followed your recommendations of Dawn, warm water and a soft bristle toothbrush followed by mineral oil. It worked wonders and did not adversely affect the razor. I was inspired to acquire a Flair Tip which works better for my beard. Hopefully a Gillette Adjustable one day! Thank you, Matt, I appreciate it.
Flitz actually says "not for electroplated finishes" on the packaging. I have used polishing cloths impregnated with jewelers rouge with great success. I still give razors purchased on the bay a dip in barbicide for 7 minutes one time, never had a problem.
Just bought a 1959 fat boy from you. Yes, I boiled it for 4 minutes. 😂🤣😂 no damage but the last 1/4 didn’t work so I used that little bottle of oil that comes with electric razors.
@@ToMaToEsGrOw I just ordered Andis Clipper oil just to be safe. Does it gunk up the razor or cause issues, I ask because care notes on the Merkur Progress say to use a lubricant once a while.
@@6komodo6 honestly I'm not an expert. It did clog gunk all inside. I thought I would have to take it apart it got that bad. Warm soapy water did the trick and didn't have to touch it since. You just don't want anything to rust. I don't really see an issue with it but sooner or later it will build up inside. Once again I'm not an expert in razors. What it wrong with your razor?
@@ToMaToEsGrOw Nothing wrong with it, just wanted to make sure it's in prestine condition for as long as possible. Did the clipper oil clog things inside or was the razor already clogged up from repeated use?
hmmmmm, my razor is sitting in Barbicide right now. I guess I better go get it out. My folks just ordered me a Rex Envoy for my birthday, so I'm glad I learned this now.
9:25 is another reason why the rex ambassador is king - it's one of the only few razors on the market which has a male post on the razor stand. You can insert a razor blade on the post and sandwich the blade between the base of the razor stand and your razor. When you want to use the blade, simply remove the razor and unscrew the post from the base. Storing the blade this way also reduces risk of cutting yourself by eliminating the need for a loaded razor
Hi Matt, I am waiting for a Rex Ambassador to be delivered and I am wondering if down the line can I disassemble the razor for a deep clean? If so how can I do it. I also have a Parker Variant , can it be done? In both cases, can you do a video on taking an adjustable apart , cleaning, etc and putting it back together. Thanks
So after every shave I take either of my three piece razors apart and put them on a small dry towel to dry for a few hours maybe pat the blade dry and then a few hours later I just reassemble the razor with the blade and put it back on my razor stand. If I need to clean it every week or two I’ll just get a toothbrush and some dawn dish detergent and scrub it down. Anything else and I’ll either have to take it to you or if it’s bad get a new razor but I usually don’t have an issue keeping it dry
Oops. I used vinegar and boiling when I first started collecting. Read about it on some forums. No noticeable damage so maybe I got lucky. I would like to add one to your list: Don't soak your razor in borax. I was lucky enough to get my hands on a Gillette toggle. It had some plating loss but at least it opened and closed smoothly, had the paint on the numbers, and had the red dot. After soaking it in borax and warm water it was really clean, but the red dot disintegrated. Boy that made me mad.
Helpful criticism. I'm watching your video late at night. I can't hear you so I turn up the volume only to hear you get real loud and I have to hurry and lower the volume. Please consider leveling the sound in your videos. I just discovered your channel and subscribed right away. Thanks for sharing your in depth knowledge.
Pro tip: Don’t buy mineral oil at the hardware store or home center; they sell to wood workers and painters and guys who are oiling their $150 cutting boards. You’ll pay six prices for it. Go to the laxative aisle at the drugstore. You can get a lifetime supply for 3 bucks.
@@SuperK7654 Sure, but I suppose there may be brands that contain drying agents; anything’s possible. And “baby oil” is just mineral oil with an added fragrance. Check the label to be sure.
@Kevin Cole as mentioned a lot of mineral oils can be pricy. I bought this one from Amazon and seems to do just fine at a good price. As of this post, it's $2.49, a dollar less than what I paid. www.amazon.com/Oster-Premium-Clippers-Blades-076300-104-000/dp/B00063KI5I/ref=mp_s_a_1_3?dchild=1&keywords=oster+blade+lube&qid=1609690567&sr=8-3
Thanks Matt. I read SO MANY differing opinions on this topic, it’s great to get the skinny from someone with experience fixing the end results of errors. What about Scrubbing Bubbles?
I do like to disinfect a used vintage razor, after cleaning with detergent, hot water, and a brush; before I put into use. After a thorough drying process, I like to use rubbing alcohol to dip the head of the razor in, just momentarily, high proof booze would work too. Is this a safe procedure for the antique Gillette gold washed razors with lacquer? I can't say for certain. But, who knows where an 80 year old razor purchased from a thrift store, estate, or auction house has been? Once a razor is in my den, I see no point in sanitizing it. All the cooties on it are mine. Sunlight is a very effective sterilant; but there is a shortage of that this time of year. My point #11 would be: put it away clean and dry after every use. That way you will never have to resort to any heavy duty cleanup on your razor. I like to use a nylon bristle knuckle brush and whatever leftover shave soap I have left in the shave brush from the use of the day to clean up my razor. It takes 10-15 seconds, max.
Thank you for that! Not even half a year into wet shaving and I've sure done some of your DON'Ts 😂 How about sanitizing with rubbing alcohol? And if so, at what percentage is it safe? 99? 70? 60?
I have ruined a handful of aluminum kitchen tools in the DW. Aluminum doesn't play well with washer detergent. It ruins the finish and they forever shed black kaka. On a happy note today I ordered a Rex Ambassador and stand. Looking forward to it. The reason could also be a tip. I have a Mergress and a Timeless. I soak them in CLR. I left them in overnight a few times. The Mergress one day wouldn't thread. I looked at the cap and half the threads were eaten away. Merkur thankfully sells replacements for around $8 on their site. I also noticed a discoloration in the finish on the handle. I have no doubt leaving cheaply plated metal in CLR overnight is not a good idea any more. :)
I leave the blade in after loosening and cleaning the blade with water then a dash of alcohol. No problems with rust. I change the blades every 4-5 shaves so they are not in there for a long time. Will soon write a review on your ambassador. Comparing it against my other razors first.
I’ve got one for you, how about ultrasonic cleaners? Like many of my compadres I have an ultrasonic cleaner I use out in my shop for carburetors and other parts. Would an ultrasonic cleaner with a mild detergent ruin the finish on vintage razors?
Very helpful set of tips! I used nano-oil on a very squeaky Fatboy, which did bring it back to live, including the quarter turn. I was tempted to drown it but resisted. So perhaps #11 could be don't drown your razor in oil, and #12 could be don't stick in an ultrasonic cleaner! Happy new year to you and all at RazorEmporium!
Ok I'm glad you're saying this . I over tightened a coated zinc razor head and while the damage is minimal, I see an etching mark on the base plate.. And I lost sleep over it, it was an accidental idiot move on my part.. I had someone say it needs to be coated immediately.. It's a forty dollar razor,the head is zinc, and the handle is stainless steel.. I simply forgot to use the bumper ring aka oring that came included. I had looked at it again and used a bumper oring that's even bigger now and the mark is significantly covered yet I'm looking at it and worried I ruined a brand new slant razor head.
Well I won’t have to worry about cleaning them for a while, you guys have both my slims and one fatboy for a complete revamp and I just got an email today saying they are almost done, I’m so excited I literally been waiting years to send them out to you and now they are almost done I feel like a little kid again waiting for Christmas 😂
What I've been using to "sterilize" the DE Safety Razors (vintage Gillette's) I've bought off eBay is Dawn dishwashing detergent and also put them in a UV Sterilizer! It makes me feel better.
Great list of do-not-dos. I steer away from gold-plated razors for that very reason of them being more vulnerable to plate loss. And esthetically they just don't hold up as well.
What about vegetable oil? Those are food safe too and should also lubricate the threads right? Also should i dry my razor and blade with a towel or is that a bad idea?
@@sneakysnek8416 shaking out & loosening up the razor while patting dry with a towel / paper towel is ok and will help kept it from possibly rusting / staining. Good luck.
Great advice and great video 👍. I was thinking of putting mineral oil on the thread part that screws in the handle, to try and avoid any scale build up from tap water. Would you recommend just leaving the threads as they are but ensure they are dry after use, or, should I use a little mineral oil. Thanks.
Matt, your thoughts on mineral-oil alternatives such as Ballistol? At one point I thought I remember hearing that Ballistol was your go-to lubricant in your shop, is/was that true?
Hello I just recently purchased a MINT Gold Gillette Toggle. Is it safe to use Alcohol on it? I always use a fresh blade for every shave, and I use dish detergent to clean my razor with a soft toothbrush after every use.
@@RazorEmporium Okay what is the best way to clean it to make sure it is sanitized and safe to use being that it is a vintage razor? I was just going to use some dish detergent and then dip the head of the razor quickly in 70% alcohol and rinse it with water afterwards
Disassembling and cleaning my razor (or at least drying it off if I'm in a hurry) is always part of my shave. I know I need time to create a lather, and the same goes for cleaning. It's just a part of the process.
Wish i knew #2 earlier, got some rust spots on the inside of my christopher bradley and can’t seem to get them off. Now i dry every part after every use.
I generally bring water to boil, then let it cool until it's not bubbling any more, then pour it over the razor in a dish with some detergent. I'm guessing you would still consider that too hot?
The only 2 mistakes I could see myself doing (if I didn’t watch this video) is Vinegar to clean & not letting the blade breathe (although I don’t think mine has rusted as I use reputable company blades). I’ll have to check tomorrow for rust haha! Mineral oil was a useful tip though. I can’t believe people would do the other mistakes in this video haha! I can’t believe people do the other things lmao!
Great info. Just a quick question, what about cleaning the razor with regular white paste toothpaste and a toothbrush ? I heard that works but I don’t want to try it unless it is safe. Thank you and happy new year!
Hey Matt, are you familiar with a cleaning product called CLR? Used to clean calcium, lime, and rust. I use it to get rid of blade stains with good success. Would that damage your Rd plating?
I use a 20% CLR solution on nickel plate razors and brass razors where the gold is worn off, soak for 30 seconds and it takes off light tarnish and comes out nice and shiny.
QUEEEEE QUE QUEEE BUEEEEEN VIDEO MR MATT. INCREIBLE QUE TODO A LO QUE LE DICES QUE NO PUES EN ALGUN MOMENTO SE LE PASO A UNO POR LA CABEZA ;-) GRACIAS A DIOS ESTA TU CONTENIDO PARA GUIAR A TANTA GENTE QUE PUEDE CAER EN ESTE TIPO DE ERRORES, ADMIRO EL TRABAJO QUE HACEIS CON LAS GILLETTE Y LAS RAZORS VINTAGE. ES HERMOSO EL SITIO WEB RAZOR EMPORIUM, UNO SE METE Y LO QUIERE COMPRAR TOOODO, TE QUERIA PREGUNTAR, TIENES ENVIOS A CHILE? DESDE ESTE LADO DEL GLOBO TERRAQUEO ES CASI IMPOSIBLE CONSEGUIR ALGUNAS DE LAS JOYAS QUE ESTAN EN TU SITIO WEB.
I swear there is no other reviewer out there who can explain with class like Matt 👍
Thx 😊
He murdered the poor razor infront of the whole world😢😢😢
10 years DE shaving here, and yeah, I have violated all of these rules at least once😳 good info👍
Happy New Year, folks! I feel your frustration, Matt. FWIW, I had to make a similar announcement every year as a middle school band director on how NOT to destroy your instrument! You’d be amazed at the many imaginative ways students (and parents, mainly MANLY dads) irretrievably mangled their instruments. One year, I had a macho dad try to pull a stick mouthpiece from a trumpet by clamping the whole thing in his vice grip, and pulling with his Robogrip pliers. The mouthpiece stayed in the leadpipe, but he ripped the leadpipe and tuning slide branch right off the horn, and crushed the valve assembly to boot. The thing was literally ripped in half. Seriously, I have a specialized mouthpiece puller that would have done it safely in 5 seconds. But noooo - trumpet destroyed! 😖
Wow!
I'm proud of my safety razor hobby and thanks to channels like this, the hobby will be preserved until well after I die. (And that's a long long time!)
Possible number 11. Dont overtighten when you change blades. A lesson learned from experience. . . . I pulled the threaded piece from the cap on a DE89.
Especially with razors made from zamak, it may kill te razor.
Thanks, Matt. These are awesome tips. You probably (hopefully) just saved a large number of vintage, never to be made again razors, from destruction. This video is a must watch for all wet shavers.
I find shaving to be a therapeutic ritual that was passed down by my grandfather and father, I would sit on the toilet seat and watch while getting good life advice when I was a child. Seeing the brush and lather, how their faces would go from scruff to smooth, and those classic scents that I now use myself. I hope to pass this ritual down to my son when it’s his turn, currently he’s in the “daddy what’s that” stage as a 2.5 year old, so life advice will have to wait for a few years. I’ve had the same razors for a few years and cycle through them regularly, although I make sure they dry out, I take a dedicated tooth brush and dish soap to scrub them and dry them with a microfiber cloth once a week. They all pretty much look like they’re new, and look fantastic on my restroom counter.
Had to save this video... even though I wouldn’t do some of these, but I often wondered how you would clean a vintage razor. Learned something new today. Thank you!
One of my shavers is an old 1960 Gillette Fatboy that used to be my dads. I did hose mine down with WD40 because I wanted it to get it down in the handle and not only lube up the moving parts but also help remove mineral deposits. I was amazed at how smooth it worked after that. Did I use it to shave right after hosing it down with WD40? No, I took a toothbrush and some warm water and used some dish soap and cleaned it. After rinsing it off I put it in a stand with the butterfly wings open to let it dry. I also remove the blade and give it a spritz of Clean Shower to prevent mineral deposits and stick it to a little magnet to dry. I also have a Vikings Blade Emperor which I clean with the toothbrush and some dish soap and that keeps it looking as good as when it came out of the box. Using these old technology shavers to shave with now is much more enjoyable than using the modern cartridge style razors.
"Let it breathe" I guess that some people are minimum just lazy. After every shave I open my razors and throughly clean them. I love getting every day my beautiful and sparkling razor and shave uninteropted by anyone.
I baby my vintage DE razors and take out the blades to dry after every shave and then clean the razor so it's shiny again...LOL!
I shave in the shower, and I always thoroughly dry my Slim razor with a paper towel inside and out and put it away in a dry drawer.
Meh. These things have been in use for over 100 years. "The men who built America", the men who fought on both sides of two world wars, the men who landed on the moon. Collecting old ones IS a fun hobby and part of the fun is babying them. But to 100's of millions of men it's just a tool, not a hobby. They were built to be durable.
@@MossJenks yes you are right, if we would all, be rich. But if you spend a lot, of your hard earn money, you don't see it as a tool anymore and it becomes your "baby"
For the past 9 years I went to the barbershop so they do my beard that being said, today I shaved myself with disposable razors, the feeling of shaving again for almost ten years it's weird. So I went bananas on the internet and buy a Vikings blade emperor emoji or something like that, I hope to get it on Friday or Saturday, but watching all the cares that takes kinda reminds me why I decided to someone else take care for my beard .... Wish me luck
I recently obtained another British Aristocrat Junior at a Flea market. It was very dirty and stiff to open. I put a drop of Dawn detergent inside and then soaked it for an hour in hot water and Dawn. Stiffness was gone and a little scrub with tooth paste and it's like brand new! Happy New Year and thanks for all the great videos!
I'm glad I watched this video. I am guilty of using Barbicide. I also need to let my current razors breathe by loosening the blade as you show. I have not done the other 8 razor-destroying things. I am expecting the get a "revamped" razor back from your service next week. I now understand I need to avoid the Barbicide totally and make sure I loosen the blade between shaves and let the finish breathe. Thank you very much for posting this.
Been watching your channel for a long time. I can remember when you used to say flitz was fine to clean with and also you could put your razor in the dishwasher to sterilize it. I guess we all learn over years and experience. Thanks for all your great video's and look forward to many more! I wish you and yours a Very Happy New Years!
I gave that caveat in today's video that I had said it in the past. Both flitz and dishwashers are safe if many precautions are in place. Remember the topic today was how to not destroy your razor. Both methods of cleaning can be safe but also can cause harm.
@@RazorEmporium I know I watched it till the end. Again thank you for all you do for us in the razor community!
Me too! I watched these videos in the wrong order. Took Matt’s advice Went out and bought a bottle of Flitz just a couple days ago tried it and wasn’t too impressed. Then today I watch this video and Matt distinctly says” Don’t use Flitzs”
Oh well, that’s how it goes sometimes.😂
Such a phenomenal review of what not to do. 😁 I’m really glad I listened prior to receiving my reconditioned replated nickel Fat Boy. And I took your advice, I do clean and dry the razor & blade each time I use it. The tip to leave the razor blade loose between uses was brilliant. 😁 just one of your million of fans.
I'm glad that I watched this video I just got a brand new parker 99r and I want to take good care of it and now I know that after I shave to remove the blade so it doesn't leave marks on the razor
I read from a few razor instructions not to screw your handle too tight, especially on an adjustable. It may wear the threading. Hope you have a good year Matt!
I've made some of those mistakes, but have not done any significant damage on my razors. My cleaning routine is basically an old toothbrush and liquid had soap. Works great. For the blade, I simply have a magnetic base on my bathroom mirror and put the blade there to air dry. Never had issues with blades rusting on my razors.
Loved this, Matt; thank you! I take the blade out after every shave and "pat" it dry (no rubbing, just literally laying the blade in a towel and covering it with another part of the towel to soak up the water). Then I put it back in the wrapper. My razor, I leave loose -- butterfly's are open all the way and three-pieces are not even tightened down even one turn. I've not had any issues with rust or discoloration.
I have, however, boiled an old Gillette adjustable. It was like someone had poured molasses down it! When I boiled it, all this grease appeared on the surface of the water; it was disgusting. Of course, now I'm thinking that it might have been some coating on the razor (but these were nichol so, perhaps not).
Anyway, I just shipped my Christmas present to you (it arrived New Year's Eve) for revamping! I'm so excited. It's my birth year _and_ quarter! It's a K3 Slim Adjustable. I can't hardly wait!!!
Excellent advice! I just got a 1955 Gillette flare tip in excellent mechanical condition but it was covered in years of neglect and soap scum. After cleaning it with hot water, dishwasher liquid and an old toothbrush it cleaned up nicely. I then simply buffed the cap with an old sock and it shined right up! Thanks for confirming my thoughts on boiling the razor or using abrasive polishing compounds. It's simply not necessary.
I just bought a late 50s English Gillette flare tip Rocket two days ago. Found it on the back of a shelf of junk in an antique store in perfect condition but it could still use a good cleaning. Think I'll give it a gentle scrub today with some Dawn dish detergent and a soft toothbrush and then buff it with an old sock. Thanks for the tips!
27 here, not a big shave geek, but today I bought the Ambassador off the WCS site with a few intro blade packs. We’ll see it if lasts till I’m a geezer :) I’ll unscrew and air it out often.
Thanks for the education I’ve been doing it wrong. You put on the right path
I just bought my first vintage razor, a fatboy from ebay and I'm waiting for it to arrive. I'm glad I watched this video because I was literally going to do almost everything you said not to. LMAO
Howdy Matt! Great tips to protect our shave den equipment from unnecessary damage. 🙏🏼
Happy New Year!!! Thanks for confirming that I'm smarter than I thought. Never used Barbicide or metal polishes. I've always dried my blade after every shave and I clean my razor using an old toothbrush and dish detergent when needed. Food-safe mineral oil is the only lubricant I use.
Great info Matt. I was about to go to town on a gold Bostonian with the brasso pads... soft toothbrush and dish soap it is then 👍
Happy new year Matt, it broke my heart when you use that hammer! No 🔨 for sure!
But he repaired it later on.
First place my mind went, why is there a hammer? I need to watch the whole video lol.
Maybe it was one of those cheap Chinese razors
Phew! I’ve never done any of these. Can you use rubbing alcohol on a Bakelite handle, like the Gem Featherweight?
@@johnjanzen5856 Not Bakelite on the Featherweight, it's modern plastic of some kind, it wouldn't hurt it
I have ruined so many razors. Especially with herbicide and metal polish. I have probably done all of these things except the hammer! And, I can attest to the fact your batting 100% on you assessment.
I only wish I had this 15 years ago when I
Came down with RAS (razor acquisition sickness). The herbicide really screwed up my adjustable razors. I have 3 or 4 Slims that hardly turn closed.
Thanks for another great video Matt.
You are the Best at what you do!!
Herbicide! That's for killing weeds LOL!
Very informative and saved me from the Barbicide mistake...lol I always take the blade out and wash and dry mine in a clean towel after every use. Occasionally wipe it down with rubbing alcohol since I had a few, bitter, rounds with Staph infection over the years.
I'm just getting into safety razors but I 100% agree with the tool tip. Pls always use the right tool for the job.
This was helpful. Guilty of a couple but nothing too major or drastic. Nice to have learned before significant damage was done.
Great video, very informative, thanks! So many great tips. Glad to know loosening the cap, on days I don’t remove a blade all the way is technically the right thing.
Thank you for the big 10 don'ts with safety razors. Saves me otherwise caused misery.
👋😃👍
Great stuff! Just learning DE shaving and your channel and content and knowledge is amazing! Your presentation style is fantastic too!
After every use I always disassemble a razor, rinse off all parts and dry with a towel. Never had any issues with dirt, apart from some soaps maybe in the guard holes. But then a toothbrush and some dishwasher liquid will take care of that. That’s all I have to do to keep my razors in good condition.
Matt👍👍💈 Happy New Year bro. OK you got me, I usually do the Dawn and toothbrush routine first, then a quick soak in sterilizer/alcohol. Just a 10 minute soak then rinse and dry. The rest of these items I haven't done except for the Flitz wipe down which took the gold finish right off a 1920's/30's New short comb top cap, lesson learned. Great video and tips, thanks. I can only imagine what you have seen come into your shop for repairs, good laughs and head shaking. I will admit to using an ultrasonic cleaner with mild cleaner, so far so good. Enjoy!
Ultrasonics are good
Great video, I think you should branch into “drop test” and “destroying” viral videos!
Hi Matt- Great video on razor care do’s and don’ts. Luckily I have a few RE polishing cloths which are great. I did have a question about sonic cleaners, please. I’m thinking of this in particular for the Shick injector-type razors where the metal head is formed by folding a few layers of metal on itself. It’s very difficult to really clean those areas. Running a razor through the sonic cleaner with warm water and some anti-bacterial soap seems like it might be an answer for this specific razor. I would greatly appreciate your thoughts, please. Wishing you and your family a very Happy New Year! All the best in 2021, Matt!
4th request today for an ultrasonic cleaning video. Will do!
Thanks, Matt! Best regards!
Pipe cleaners and toothpicks work well to get in the nooks and crannies of a Schick.
@@johnfregeau8981 Thanks, John!
I so glad that I watched some of your previous videos before I refurbished my Grandfather's Gillette Super Speed DE Safety Razor Red Tip.
I followed your recommendations of Dawn, warm water and a soft bristle toothbrush followed by mineral oil. It worked wonders and did not adversely affect the razor. I was inspired to acquire a Flair Tip which works better for my beard. Hopefully a Gillette Adjustable one day!
Thank you, Matt, I appreciate it.
Again a great video. Very informative. It will keep me from making mistakes. Keep up the good work.
Great tips Matt. Oh and I’m going to order the Envoy next week. Looking forward to trying it out.
Flitz actually says "not for electroplated finishes" on the packaging. I have used polishing cloths impregnated with jewelers rouge with great success. I still give razors purchased on the bay a dip in barbicide for 7 minutes one time, never had a problem.
thanks for this video, i was gonna do at least one of these things
Just bought a 1959 fat boy from you. Yes, I boiled it for 4 minutes. 😂🤣😂 no damage but the last 1/4 didn’t work so I used that little bottle of oil that comes with electric razors.
Did it fix it?
@@6komodo6 temporarily. Soak it in warm soapy water for a couple hours. Completely fine after that. I wouldn't recommend what I typed 8 months ago.
@@ToMaToEsGrOw I just ordered Andis Clipper oil just to be safe. Does it gunk up the razor or cause issues, I ask because care notes on the Merkur Progress say to use a lubricant once a while.
@@6komodo6 honestly I'm not an expert. It did clog gunk all inside. I thought I would have to take it apart it got that bad. Warm soapy water did the trick and didn't have to touch it since. You just don't want anything to rust. I don't really see an issue with it but sooner or later it will build up inside. Once again I'm not an expert in razors. What it wrong with your razor?
@@ToMaToEsGrOw Nothing wrong with it, just wanted to make sure it's in prestine condition for as long as possible. Did the clipper oil clog things inside or was the razor already clogged up from repeated use?
hmmmmm, my razor is sitting in Barbicide right now. I guess I better go get it out. My folks just ordered me a Rex Envoy for my birthday, so I'm glad I learned this now.
Happy new year!
Great video and thanks for the information. It's nice to know some of these things, I honestly really didn't know.
I have just got myself a DE razor and am enjoying the experience. Can they be cleaned using an ultrasonic cleaner?
Yes we have a whole episode on them!
Excellent advice Matt. Thanks.
9:25 is another reason why the rex ambassador is king - it's one of the only few razors on the market which has a male post on the razor stand.
You can insert a razor blade on the post and sandwich the blade between the base of the razor stand and your razor. When you want to use the blade, simply remove the razor and unscrew the post from the base. Storing the blade this way also reduces risk of cutting yourself by eliminating the need for a loaded razor
Happy New Year 🎈🎊🎆 Matt some great advice “Thank You”
Hi Matt, I am waiting for a Rex Ambassador to be delivered and I am wondering if down the line can I disassemble the razor for a deep clean? If so how can I do it. I also have a Parker Variant , can it be done? In both cases, can you do a video on taking an adjustable apart , cleaning, etc and putting it back together. Thanks
I second this request!
Great video idea 💡
So after every shave I take either of my three piece razors apart and put them on a small dry towel to dry for a few hours maybe pat the blade dry and then a few hours later I just reassemble the razor with the blade and put it back on my razor stand. If I need to clean it every week or two I’ll just get a toothbrush and some dawn dish detergent and scrub it down. Anything else and I’ll either have to take it to you or if it’s bad get a new razor but I usually don’t have an issue keeping it dry
Oops. I used vinegar and boiling when I first started collecting. Read about it on some forums. No noticeable damage so maybe I got lucky. I would like to add one to your list: Don't soak your razor in borax. I was lucky enough to get my hands on a Gillette toggle. It had some plating loss but at least it opened and closed smoothly, had the paint on the numbers, and had the red dot. After soaking it in borax and warm water it was really clean, but the red dot disintegrated. Boy that made me mad.
Helpful criticism. I'm watching your video late at night. I can't hear you so I turn up the volume only to hear you get real loud and I have to hurry and lower the volume. Please consider leveling the sound in your videos. I just discovered your channel and subscribed right away. Thanks for sharing your in depth knowledge.
Is there a brand mineral oil you suggest?
Whatever is cheapest
Pro tip: Don’t buy mineral oil at the hardware store or home center; they sell to wood workers and painters and guys who are oiling their $150 cutting boards. You’ll pay six prices for it.
Go to the laxative aisle at the drugstore. You can get a lifetime supply for 3 bucks.
Good call. Can that same mineral oil treat wood?
@@SuperK7654 Sure, but I suppose there may be brands that contain drying agents; anything’s possible. And “baby oil” is just mineral oil with an added fragrance.
Check the label to be sure.
@Kevin Cole as mentioned a lot of mineral oils can be pricy. I bought this one from Amazon and seems to do just fine at a good price. As of this post, it's $2.49, a dollar less than what I paid. www.amazon.com/Oster-Premium-Clippers-Blades-076300-104-000/dp/B00063KI5I/ref=mp_s_a_1_3?dchild=1&keywords=oster+blade+lube&qid=1609690567&sr=8-3
Thx very very much... u just help me to take care of my stainless steal supply... i didn't know i had to take off the blades. I mean it thx
Thanks Matt. I read SO MANY differing opinions on this topic, it’s great to get the skinny from someone with experience fixing the end results of errors. What about Scrubbing Bubbles?
been using scrubbing bubbles for decades on my old and new razors zero problems.
Generally safe to use however it can damage delicate finishes like silver or lacquered gold
I heard ultrasonic cleaners are good but will take the painted numbers off Gillette adjustables. Is that true?
@@DrRonP I've heard that as well, and saw it demonstrated in a TH-cam video.
Have you ever used the shelved razor?
Never heard of it
@@RazorEmporium the razor behind you in the video
I do like to disinfect a used vintage razor, after cleaning with detergent, hot water, and a brush; before I put into use. After a thorough drying process, I like to use rubbing alcohol to dip the head of the razor in, just momentarily, high proof booze would work too.
Is this a safe procedure for the antique Gillette gold washed razors with lacquer? I can't say for certain. But, who knows where an 80 year old razor purchased from a thrift store, estate, or auction house has been? Once a razor is in my den, I see no point in sanitizing it. All the cooties on it are mine.
Sunlight is a very effective sterilant; but there is a shortage of that this time of year.
My point #11 would be: put it away clean and dry after every use. That way you will never have to resort to any heavy duty cleanup on your razor. I like to use a nylon bristle knuckle brush and whatever leftover shave soap I have left in the shave brush from the use of the day to clean up my razor. It takes 10-15 seconds, max.
Thank you for that! Not even half a year into wet shaving and I've sure done some of your DON'Ts 😂
How about sanitizing with rubbing alcohol? And if so, at what percentage is it safe? 99? 70? 60?
Sanitizing from who? Yourself? Or used razors?
@@RazorEmporium Used razors. Let's say from a friend or ebay or flee market.. thank you for your reply!
Good information. Thanks.
Nice video, Matt. Please share your opinion about ultrasonic cleaners. Thank you.
I put a response above - I think a video is in order!
Thanks Matt 🙌🏻
I have ruined a handful of aluminum kitchen tools in the DW. Aluminum doesn't play well with washer detergent. It ruins the finish and they forever shed black kaka.
On a happy note today I ordered a Rex Ambassador and stand. Looking forward to it. The reason could also be a tip. I have a Mergress and a Timeless. I soak them in CLR. I left them in overnight a few times. The Mergress one day wouldn't thread. I looked at the cap and half the threads were eaten away. Merkur thankfully sells replacements for around $8 on their site. I also noticed a discoloration in the finish on the handle. I have no doubt leaving cheaply plated metal in CLR overnight is not a good idea any more. :)
I leave the blade in after loosening and cleaning the blade with water then a dash of alcohol. No problems with rust. I change the blades every 4-5 shaves so they are not in there for a long time. Will soon write a review on your ambassador. Comparing it against my other razors first.
My dad used to take his blade out of his de and "strop" it in a glass, will this help keep the blade sharp?
It can help but also hurt. For the cost, a new blade is best
@@RazorEmporium Thank You.
I’ve got one for you, how about ultrasonic cleaners? Like many of my compadres I have an ultrasonic cleaner I use out in my shop for carburetors and other parts. Would an ultrasonic cleaner with a mild detergent ruin the finish on vintage razors?
th-cam.com/video/WzbFLHoeRLc/w-d-xo.html
I use ballistol on my safety razor. Since i have it around for my folding knives. Is that okay to use?
Yes
@@RazorEmporium thank you
Very helpful set of tips! I used nano-oil on a very squeaky Fatboy, which did bring it back to live, including the quarter turn. I was tempted to drown it but resisted. So perhaps #11 could be don't drown your razor in oil, and #12 could be don't stick in an ultrasonic cleaner!
Happy new year to you and all at RazorEmporium!
Ok I'm glad you're saying this .
I over tightened a coated zinc razor head and while the damage is minimal, I see an etching mark on the base plate..
And I lost sleep over it, it was an accidental idiot move on my part..
I had someone say it needs to be coated immediately..
It's a forty dollar razor,the head is zinc, and the handle is stainless steel..
I simply forgot to use the bumper ring aka oring that came included.
I had looked at it again and used a bumper oring that's even bigger now and the mark is significantly covered yet I'm looking at it and worried I ruined a brand new slant razor head.
Is scrubbing bubbles still ok 🤔
Generally yes
Well I won’t have to worry about cleaning them for a while, you guys have both my slims and one fatboy for a complete revamp and I just got an email today saying they are almost done, I’m so excited I literally been waiting years to send them out to you and now they are almost done I feel like a little kid again waiting for Christmas 😂
Linseed oil?
What I've been using to "sterilize" the DE Safety Razors (vintage Gillette's) I've bought off eBay is Dawn dishwashing detergent and also put them in a UV Sterilizer! It makes me feel better.
Y! Is it safe to clean a chrome SR with FAIRY dish manual detergent, cold water and a sponge? Just like a spon?
Great list of do-not-dos. I steer away from gold-plated razors for that very reason of them being more vulnerable to plate loss. And esthetically they just don't hold up as well.
What about vegetable oil? Those are food safe too and should also lubricate the threads right? Also should i dry my razor and blade with a towel or is that a bad idea?
Will gunk up over time.
@@RazorEmporium I am sorry, english isnt my native language. How bad is gunking up? Does that mean I just had to clean it more often?
It will break down into sludge and jam up your razor with film / gunk/ residue / filth etc
@@DazzTone okay :D
@@sneakysnek8416 shaking out & loosening up the razor while patting dry with a towel / paper towel is ok and will help kept it from possibly rusting / staining. Good luck.
Great advice and great video 👍. I was thinking of putting mineral oil on the thread part that screws in the handle, to try and avoid any scale build up from tap water. Would you recommend just leaving the threads as they are but ensure they are dry after use, or, should I use a little mineral oil. Thanks.
Oil is fine but overkill
@@RazorEmporium Thank you very much 👍🙏
Matt, your thoughts on mineral-oil alternatives such as Ballistol? At one point I thought I remember hearing that Ballistol was your go-to lubricant in your shop, is/was that true?
We use it on some things and yes it's good. I wouldn't put it near the razor head however.
@@RazorEmporium Thanks Matt, I primarily just use a bit down the shaft of my TTO Gillettes.
Hello I just recently purchased a MINT Gold Gillette Toggle. Is it safe to use Alcohol on it? I always use a fresh blade for every shave, and I use dish detergent to clean my razor with a soft toothbrush after every use.
No. Will dry out the lacquer.
@@RazorEmporium Okay what is the best way to clean it to make sure it is sanitized and safe to use being that it is a vintage razor? I was just going to use some dish detergent and then dip the head of the razor quickly in 70% alcohol and rinse it with water afterwards
Nice find on that gold Toggle. How does it shave ?
@@jtoo6060 I will be receiving it in the mail tomorrow.
Any issues with sanitizing with UV lights? I have a couple from a phone screen protector kit laying around
After you remove surface grime, sure
@@RazorEmporium just wanted to be sure nothing was sensitive to it! Thanks for the assistance!
Hey Mat, what kind of mineral oil do you recommend?
Great video Matt
Are astra platinums cheap metal?
All blades are made of cheap metal.
can Wahl clipper oil be used instead?
Yes
@@RazorEmporium thank you very much for the reply and love your work for the wetshaving community♥️
Disassembling and cleaning my razor (or at least drying it off if I'm in a hurry) is always part of my shave.
I know I need time to create a lather, and the same goes for cleaning. It's just a part of the process.
I must ask, how do you clean your razor?
@@Tristin471 with warm water and a hand towel. Because I clean it right after use that is all I need
good info. I really love your polishing cloth. #11 should be don't let it sit- use it. Not collectibles or museum pieces. Well, maybe yours are :)
What about toothpaste can I use it with old toothbrush to clean my razor ? (Merkur Progress adjustablee and Edwin jagger DE89)
It is abrasive and will damage finish over time.
Hi Matt .
Please do a parker 99r full shave and review...
Wish i knew #2 earlier, got some rust spots on the inside of my christopher bradley and can’t seem to get them off. Now i dry every part after every use.
Great stuff, Matt. Perfect reminders for the new year. Thank you!
I generally bring water to boil, then let it cool until it's not bubbling any more, then pour it over the razor in a dish with some detergent. I'm guessing you would still consider that too hot?
Matt, will WD40 hurt the mechanism or finish of a Gillette Slim or Fat Boy ,
No
Very good tips. Thanks.
The only 2 mistakes I could see myself doing (if I didn’t watch this video) is Vinegar to clean & not letting the blade breathe (although I don’t think mine has rusted as I use reputable company blades).
I’ll have to check tomorrow for rust haha! Mineral oil was a useful tip though. I can’t believe people would do the other mistakes in this video haha!
I can’t believe people do the other things lmao!
I would love to see a review of the Supply Single Edge Razor from you. Been thinking of getting it and would love your input.
Great information, thank you!
Wondering... what is the story of that huge safety razor on the shelft in the background ?
th-cam.com/video/D-hVxeTQQT8/w-d-xo.html
Great info. Just a quick question, what about cleaning the razor with regular white paste toothpaste and a toothbrush ? I heard that works but I don’t want to try it unless it is safe. Thank you and happy new year!
Hello Matt, just wanted to know if a 3-piece razor is more prone to breaking from the threads?
If dropped, any razor can break.
Hey Matt, are you familiar with a cleaning product called CLR? Used to clean calcium, lime, and rust. I use it to get rid of blade stains with good success. Would that damage your Rd plating?
Wouldn't recommend it.
I use a 20% CLR solution on nickel plate razors and brass razors where the gold is worn off, soak for 30 seconds and it takes off light tarnish and comes out nice and shiny.
QUEEEEE QUE QUEEE BUEEEEEN VIDEO MR MATT. INCREIBLE QUE TODO A LO QUE LE DICES QUE NO PUES EN ALGUN MOMENTO SE LE PASO A UNO POR LA CABEZA ;-) GRACIAS A DIOS ESTA TU CONTENIDO PARA GUIAR A TANTA GENTE QUE PUEDE CAER EN ESTE TIPO DE ERRORES, ADMIRO EL TRABAJO QUE HACEIS CON LAS GILLETTE Y LAS RAZORS VINTAGE. ES HERMOSO EL SITIO WEB RAZOR EMPORIUM, UNO SE METE Y LO QUIERE COMPRAR TOOODO, TE QUERIA PREGUNTAR, TIENES ENVIOS A CHILE? DESDE ESTE LADO DEL GLOBO TERRAQUEO ES CASI IMPOSIBLE CONSEGUIR ALGUNAS DE LAS JOYAS QUE ESTAN EN TU SITIO WEB.
Yes