Printing Do3D's Deadpool Helmet STL on Bambulab X1C: Check the Incredible Fabric Detail on the Shell
ฝัง
- เผยแพร่เมื่อ 10 มิ.ย. 2023
- Printed by @3d__encounter ( / 3d__encounter )
STL/3D print files from www.do3d.com
3D printer used: @BambuLab 's X1C - ยานยนต์และพาหนะ
And the first detail looked very beautiful with supports.
Наикрасные стринги похожа
@@persona7080j
😊😅٠٩
U guys should do more tutorials on how to orient prints and supports love ur designs
exactly this.
Pls🙏
EFG😂😊
Yep! Would love to know support/pattern settings.
I’m gonna get a 3d printer and make the Deadpool mask. No one has ever done this.
Super beau !!!!!
He doesn’t wear a helmet, he wears a mask
Sit down A+
İyghnn😢kh😅🎉uj😮ojj😅😊jjjjvbb❤mnn
@@petermarkk1408 suuusu
@@petermarkk1408 suuusu
Same thing
What r ur tree support settings?
THAT is awesome!!
Мне такой прибор достался только на первый прыжок с 800 м. На второй раз сказали, что закончились, если хочешь сейчас прыгать - то без него. Из плюсов - не надо его отключать после раскрытия основного купола.
Wow nice
Very cool!
At first i thought "who's underwear is that" 😅
The supports are so cool
Всю красоту оборвали))
what are you settings out of curiosity? Are y'all using BambuSlicer as well?
Nice face shell
Holy shit man!
Como es posible imprimirlo en un area de impresion de 256mm3 ? Si el modelo tiene una altura de 281 mm ? Lo escalaste ?
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Alter geilomatomat ❤😊😊
Hello 😆 Oh! It’s amazing and cool!😆👍️
In the benenging loks like Victoria secret stuf or something
Sensacional
Could you give us the steps of how you post treated the prints ? With paints and sandpaper etc please ?🙏🏻🙏🏻🙏🏻
Косплей выходит на новый уровень
Круто
At first i thought it is from stranger things 😂
I ❤ my X1C
What kind of 3D printer are you talking about?
Bambulab x1 carbon
did you shrink the model ? mine does not fit the bambu lab ?
ponlo en diagonal, de esa forma ya entra
Nice👍👍👌🔥🔥
В начале я думал -это трусы))
On the second thought thought carnage
I need a Bambuu😂😢
I think this is dead pool mask😎😎😎😎😎
Super cool hero ever😎🤟
First look looks like venom
😊😊
Cool, i love ironman
Look like T-back😮
変態仮面かと思った😂
Donde puedo descargarme el diseño???
What settings did you use for the supports?
Стринги натянул 😂
First I think it's Oven😂😂
Op
他の人も書いてるけど、日本人は変態仮面だと思っちゃうよねw
Initially it looked like a predator mask
What to do with the excess part?😮
Throw it at the trash or buy an expensive filament making machine where you can make it back into filament
Огооо. Круто. Как у меня :)
I want that 😅😮
please, helmet of the Japanese warrior black armor rx
変態仮面と思った日本人おるやろ
💠💠
変態仮面の奴かと思ったわ笑
Curious what you call those supporter
変態仮面みたいなもんだからセーフ
Looks like a purchase from Victoria's secret
How much does this cost you to make? And how do you make this?
첨에 프레데터 가면인줄ㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋ
I though is a corset from 1st😂
Deadpool Helmet STL link please
一直飄過雙黃到對向道 早晚出事
where you get the model?
I try to raise up the scaling and it way to big for my x1carbon print bed any suggestions?
I love it give me one❤❤❤
Feel like you❤❤❤😊
It look like underwaier
İlk iç çamaşırı sandım
What temperature and speed
Initially I thought it was a bra😂😂😂
me too. a Big red bra.
In the first look, I thought it’s a underwear :)))
Трэк в студию))))
Cafe Disco feat. DIVMOND - Heart Shaped Box
Круто вопще круто
Маска трусонюха)
Думал чьи то труселя
That’s the modal
When I add it the the buildplate for my x1c it was big , did u scale it down of how can I print it with the same size
I just squeezed it in. Lots of rotating and tilting. It will fit...barely
Hello. Can you tell me how many filament was used in total, please?? Thanks.
Greart print.
Дайте мне пожалуйста файл
Bro how much do u charge if it's for sale
In which slicer did you slice that model? How this support type is called?
can we reuse those redundant plastic
Bu yazicida tabla ayati yapilmiyormu yapilmiyorsa hangi model isim ne
i bought this stl file can i learn your support settings please
Hola que tiempo alli
What the actual hell was that support
Idk if you are a 3d printing person but tree(organic) supports have been aroind for a good while now..
at first i thought it's Hentai Kamen mask 🤣🤣🤣
Cool but you shouldve printed that upside down you would save alot of support and time, just a little bit of sanding unless its a face shell
It's a textured mask so would look awful printed upside down
Yeah definitely don't print this upside down 😂
What song is this?
?
Cafe Disco feat. DIVMOND - Heart Shaped Box
@@titan_rtmwrong!!!
@@titan_rtmdifferen.. no same
I want to know what's the machine name
Plz paint a 3D transformer.
song name?
So I'm not the only one that takes it off the build plate and starts ripping the supports off as soon as it's out of the printer.
Not take it to the bench and start clipping them off nice a easy like.
Pla 😂
Где коменты
Dead pool has a cloth mask or a leather mask but not a plastic mask
還以為是瘋狂假面
Как песня называется
Cafe Disco feat. DIVMOND - Heart Shaped Box
@@titan_rtm Здравствуй друг что-то я не могу найти её
Че за лифчик😂
how could yall not show the support settings
Because on the x1 there really are none.. Atleast I've never had to touch them.