If you are visually challenged, you can retain the 'PAL' setting on the BF OSD Tab to see a larger custom font for WTFOS (unsure about others), but note that it will be 4x3 canvas element positioning. WTFOS @ 810p uses 36x54 px glyphs for SD (PAL) and 24x36 px glyphs for HD, meaning they are larger on the display when using 'PAL' setting. WS and HDZero @ 1080p use the 36x54 px glyphs and for 720p use the 24x36 px glyphs. Also note that WS and WTFOS are able to utilise the alpha channel for glyph transparency, where as HDZ is limited by hardware and cannot use the alpha channel for transparency, hence HDZ OSD glyph edges are a little less smooth looking on the OSD.
Hope you do a video soon on how to do this for the newest update for the o3 unit. Heard you say something about it in the last LIVE. Thanks in advance!
HI still trying to get this OSD font thing going on BF 4.4. works with BF 4.2 but not a chance on the latest BF. I have OSD enabled, but only the blocky ugly font will show up. the same googles and another copter with BF 4.2. and the font from sneaky FPV is visible. What am i missing? thanks for your great work
Hi Joshua, just a heads up (if you're not aware) the Sneaky FPV INAV fonts for Walksnail don't fully work yet. The artificial horizon and side bars present as random letters and numbers, rather than dots and dashes as they should. Everything else seems to work though
I hope Walksnail will fix this soon, at least before the flying season starts. INAV OSD is soo useful for me. Until the fix we have already a very nice full working Standard INAV font available in WS.
so, great to know but what 'bout if I have Dji V2 (WTFOS installed) paired with Vista AND O3? Can I install fonts only for Vista's gear while the O3 "part" has its own?
The O3 part is always separate and distinct from the V2 part. It depends what "mode" the goggles are in. The digital fonts on SD card will only apply to the V2 part.
@@Grim_fpvIn the DJI Assistant 2 program (consumer drone version), I have 1.07.0000 for the latest FW, aV2 goggle. I would like to use it under INAV6, but unfortunately there are only question marks in the places of a lot of data.
What about Runcam I have a runcam link wasp HD vtx Kit. The CLI parts in your DJI betaflight osd video. My speedybee F405 doesn’t recognize the cli process
hello friend, I would like to change the osd font of my goggles Integra, I tried to do this by changing the fonts available in Betaflight but nothing changed, how to proceed? Do you have a video explaining the Integra goggles?
Can you please make a video on how to change custom font in case of the new walksnail firmware that is just released. Its not taking the conthrax sneaky FPV font
what i forgot to mention is that I have the issue with the font on a DJI air Unit while I am getting the HD grid with none of my copters. all the other copters have caddx vistas . all vtx have WTFOS rooted on them. and the packeges are updated. What am I doing wrong? total desperation, trying to get this going for hours now.
What about if "custom font" is greyed out on the goggles X? I really need bigger fonts man, I can't read any of the info with the default font, would really like to know my battery voltage.
Got it. They made a firmware update. The folder name must be named "userfont" on the SD card. No readme files were updated with this necessary step. Ugh.
Hi Joshua! I need a help. I am using my Skyzone 02C goggles with Walksnail VRX. I know its not support 720p. But still it works much better than analog. But one and only problem i am facing is walksnails default osd, which are latancy, bitrate, voltage... Its not looks clear. Its look like not focused or zoom out. I think these are causing for my old goggles. But i cannot find any solution to zoom in or bold the default osd. Is there any solution ?
Copying fonts to DJI goggles root works fine too, just a few cli commands, but the process for fonts to be seen properly is different between 4.4 and previous versions when hd was not available in bf osd, centering and post flight stats alignment is off if not done right
Many of the HD fonts need work think like altitude where alt is replaced with a couple of clouds and a sun which is totally stupid. HD timer logos are stupid and too slow to recognise also. The only thing that is an improvement is the battery logo changing color depending on the power status.
Thanks JB! I watched Sneaky's video the other day, but the pace at which he was going and speaking, I was either going to fall into a coma or have a stroke...... or both. You are a master of simplifying and streamlining information. Thanks to you, and thanks to SneakyFPV and Vicewize for all of the hard work, just to give us candy for our eyeballs. 🙏🫡
Thanks Josh! For Walksnail: Is there also way to show the Goggle OSD information (e. g. goggle voltage or video link quality) in the Betaflight OSD? Because the link quality in the lower right corner is too much out of sight for me in Goggles X's big FOV and i'm using 4:3 anyway.
Hello....first of all, congratulations for the great work and video you made. I follow all your videos to perform the hack, blind and more After having performed the hack on both the Googles V2 fpv and my lite unit, everything works perfectly. The only thing I can't get to appear in the new OSD is the satellite icon and its number. The funny thing is that it works because it makes me go home etc. Also if I put the original OSD it can be seen there. I have tried several functions and the same thing always happens, which cannot be seen. It only happens to me with that icon, everything else is shown perfectly. What could it be due to? Thank you for everything...and I'm sorry for my English...I'm Spanish Greetings
11:50 Having BOTH Walksnail-OSD-fonts on the SD-Card an doing font-update an error-message appears....and then the VRX-OSD-menu freezes. Im on 29.33.16. Updating with "THIS" or "THIS" single OSD-font is no problem - it works. What am I doing wrong??? And another question: I'm missing an OSD element - "vertical speed" (climb rate)..... I placed it in BF-configurator, but it appears nowhere :-( Can anybody confirm?!
@@JoshuaBardwell Thats the point, too. I'm using BF & inav. But the issue, I'm having with the missing icon, is BF (4.4). "Climb rate" is a really nice osd feature for flying 7" longrange, right?! I just repeated trying to put 2 osd fonts on my VRX.... no succes 😞
I have this working fine on my 2 Babyhawks (BF 4.2.5). I just put WTFOS on my Explorer LR4 (BF 4.2.8) and some of the GPS elements are blinking rapidly (altitude, speed) and my distance to home and distance flown are not displaying at all. I'm using FakeHD and the positioning is correct. Any ideas?
seems my prior comment may have been deleted. strange. any reason for this? the only thing I can think of is that is mentioned going elsewhere to see a demo of hdz 1080p. shrug.
@@JoshuaBardwell No URL. Anyway the font previews are a little hit and miss but if they're there it's usually a .png in the same dir as the font zip. There are 2 WS DVR overlay rendering tools for post render for you to check out . Also HDZ 1080p OSD demo for BF 4.4 and INAV 6.0 is on my youtube.
i want my OSD as un intrusive as possible tbh. i keep saying, for fpv freestyle of manny kind, you only need voltage, signal and time and maybe a corsair
I've been waiting for this video. Thanks!
If you are visually challenged, you can retain the 'PAL' setting on the BF OSD Tab to see a larger custom font for WTFOS (unsure about others), but note that it will be 4x3 canvas element positioning. WTFOS @ 810p uses 36x54 px glyphs for SD (PAL) and 24x36 px glyphs for HD, meaning they are larger on the display when using 'PAL' setting. WS and HDZero @ 1080p use the 36x54 px glyphs and for 720p use the 24x36 px glyphs. Also note that WS and WTFOS are able to utilise the alpha channel for glyph transparency, where as HDZ is limited by hardware and cannot use the alpha channel for transparency, hence HDZ OSD glyph edges are a little less smooth looking on the OSD.
I was just trying to figure out how to update my fonts for HDZero, then JB reads my mind and releases this. Thanks!
Hope you do a video soon on how to do this for the newest update for the o3 unit. Heard you say something about it in the last LIVE. Thanks in advance!
on a roll with the videos today! thanks for the content
HI still trying to get this OSD font thing going on BF 4.4. works with BF 4.2 but not a chance on the latest BF. I have OSD enabled, but only the blocky ugly font will show up. the same googles and another copter with BF 4.2. and the font from sneaky FPV is visible. What am i missing?
thanks for your great work
Can I do comic sans... Everything else is boring
Absolutely. You just need to make your own font :)
Remember school boy😎 but I kind of like the og font... reminds me where we came from..! Analogish I mean😆
I bet you put pineapples on your pizza too, don't you.
@@terminsane HAHA... TBH I eat just about everything. I've never ordered one but I have no problem eating one.
@@YorkyPoo_UAV lol fair
Hi Joshua, just a heads up (if you're not aware) the Sneaky FPV INAV fonts for Walksnail don't fully work yet. The artificial horizon and side bars present as random letters and numbers, rather than dots and dashes as they should. Everything else seems to work though
I hope Walksnail will fix this soon, at least before the flying season starts. INAV OSD is soo useful for me. Until the fix we have already a very nice full working Standard INAV font available in WS.
Thanks Josh! I really appreciate your content and videos!
so, great to know but what 'bout if I have Dji V2 (WTFOS installed) paired with Vista AND O3? Can I install fonts only for Vista's gear while the O3 "part" has its own?
The O3 part is always separate and distinct from the V2 part. It depends what "mode" the goggles are in. The digital fonts on SD card will only apply to the V2 part.
@@JoshuaBardwell then as I thought, (the O3 partition is separate, from the other) , so great for confirm it. Thanks Joshua
Do you know if/when DJI with be bringing this functionality to goggles 2 03 air unit?
With HDZero you can see it and have it not record it as well if you prefer
Thanks for the video. I was hoping that DJI had given some solution to the v2 - O3 combo...
1.05.0000 new firmware , HD now works with 03 and gogs 2 also works with v2
@@Grim_fpv 1.07.0000?
@@Grim_fpvIn the DJI Assistant 2 program (consumer drone version), I have 1.07.0000 for the latest FW, aV2 goggle. I would like to use it under INAV6, but unfortunately there are only question marks in the places of a lot of data.
I know this is an old vid, but just got my googles. The custom setting reverts back to Auto after power cycle, any way to make it permanent ? Thx
What about Runcam I have a runcam link wasp HD vtx Kit. The CLI parts in your DJI betaflight osd video. My speedybee F405 doesn’t recognize the cli process
hello friend, I would like to change the osd font of my goggles Integra, I tried to do this by changing the fonts available in Betaflight but nothing changed, how to proceed? Do you have a video explaining the Integra goggles?
"but I only have tutorials for betaflight cuz...😮💨...of who I am as a person"
this line was so funny 😂😂 thank you for making this video JB!
Hi any chance to have this on Goggles 2?
Where did you get the foam pad for your fatshark goggles? 13:10
Can you please make a video on how to change custom font in case of the new walksnail firmware that is just released. Its not taking the conthrax sneaky FPV font
Isn't the default font on the hdzero googles already a HD one?
I love how you can refer back to previous videos, THAT is so great!
Will this work for analog systems running through bdi digidapter v2?
love the thumbnail🤣
what i forgot to mention is that I have the issue with the font on a DJI air Unit while I am getting the HD grid with none of my copters. all the other copters have caddx vistas . all vtx have WTFOS rooted on them. and the packeges are updated. What am I doing wrong? total desperation, trying to get this going for hours now.
What about if "custom font" is greyed out on the goggles X? I really need bigger fonts man, I can't read any of the info with the default font, would really like to know my battery voltage.
Got it. They made a firmware update. The folder name must be named "userfont" on the SD card. No readme files were updated with this necessary step. Ugh.
Hi Joshua! I need a help. I am using my Skyzone 02C goggles with Walksnail VRX. I know its not support 720p. But still it works much better than analog. But one and only problem i am facing is walksnails default osd, which are latancy, bitrate, voltage... Its not looks clear. Its look like not focused or zoom out. I think these are causing for my old goggles. But i cannot find any solution to zoom in or bold the default osd. Is there any solution ?
Good evening. A question...... I follow the whole process, but I don't have the possibility to make a "font update" why?
Same here
It appears that with firmware update 34.40.15, user font files now have to be in a subfolder on the SD card named 'userfont'.
Thank you for this Josh.
Great video I have to try all that thank u.
Copying fonts to DJI goggles root works fine too, just a few cli commands, but the process for fonts to be seen properly is different between 4.4 and previous versions when hd was not available in bf osd, centering and post flight stats alignment is off if not done right
Do all quads need to be on the same version of BF for this all to work properly?
@@CoopzVideo it would make setup consistent if they were pre 4.4 or 4.4 and above
@@flyingquad Cool, thanks!
Dude thanks dammmm finally 🙌
Many of the HD fonts need work think like altitude where alt is replaced with a couple of clouds and a sun which is totally stupid.
HD timer logos are stupid and too slow to recognise also.
The only thing that is an improvement is the battery logo changing color depending on the power status.
Thanks JB! I watched Sneaky's video the other day, but the pace at which he was going and speaking, I was either going to fall into a coma or have a stroke...... or both. You are a master of simplifying and streamlining information.
Thanks to you, and thanks to SneakyFPV and Vicewize for all of the hard work, just to give us candy for our eyeballs. 🙏🫡
So true 👍.
If you have WTFOSD with colourful fonts and outputting video to a phone by app, it changes fonts to defaults.
Hi Joshua
I followed everything, but when ive downloaded V1.3 there is only the "font png" files and no "font_update.ini" file.
many thanks...
My guess is you downloaded like, the WTFOS version of the font, not the Walksnail version of the font.
Yes!!!!!! Finally explained properly and by none other than JB!!!!!🎉🎉🎉
is it possible to increase the size of the font of the osd in the Dji v2 goggle ?
Thanks Josh!
For Walksnail: Is there also way to show the Goggle OSD information (e. g. goggle voltage or video link quality) in the Betaflight OSD? Because the link quality in the lower right corner is too much out of sight for me in Goggles X's big FOV and i'm using 4:3 anyway.
No that isn't possible unfortunately.
@@JoshuaBardwell Thanks!
Tell me why altitude won't work on OSD in dji v2 gogs. Do I need to root?
Yes you need to root and install wtfos and the MSP-OSD plug in to get full Betaflight osd.
@@JoshuaBardwell Thank you sir.
Haha, finally something that I've done BEFORE you told me about it - that's gotta be a first!
Hello....first of all, congratulations for the great work and video you made.
I follow all your videos to perform the hack, blind and more
After having performed the hack on both the Googles V2 fpv and my lite unit, everything works perfectly.
The only thing I can't get to appear in the new OSD is the satellite icon and its number.
The funny thing is that it works because it makes me go home etc. Also if I put the original OSD it can be seen there.
I have tried several functions and the same thing always happens, which cannot be seen.
It only happens to me with that icon, everything else is shown perfectly.
What could it be due to?
Thank you for everything...and I'm sorry for my English...I'm Spanish
Greetings
🤣🤣 the thumbnail made me literally cry with laughter 👌 it's cool how you can do that, not a hd flyer myself so i learned something today ;)
Top face is me reading the live-stream chat comments. Bottom face is when I see a new JB video posted.
Amazing video!
I was so hyped when I saw the title of the video but then you said it doesn't work with the Goggles 2.....
what are your thoughts on cnhl black series 6s batteries? Are they any good compared to the other competitive brands like tattu?
They are fine and well acknowledged in the community.
Does anyone know how to install custom fonts for HDZero with Emax Transporter HD? There are no instructions specific to this VRX available.
Assuming it has an SD card slot, I would just try this method.
@@JoshuaBardwell thanks JB
thanks works great and Shannon baker works great
Awesome vid thanks!!
I can't find the custom KISS fonts :(
11:50 Having BOTH Walksnail-OSD-fonts on the SD-Card an doing font-update an error-message appears....and then the VRX-OSD-menu freezes. Im on 29.33.16. Updating with "THIS" or "THIS" single OSD-font is no problem - it works. What am I doing wrong???
And another question: I'm missing an OSD element - "vertical speed" (climb rate)..... I placed it in BF-configurator, but it appears nowhere :-( Can anybody confirm?!
Walksnail currently has a bug with iNav custom fonts. Are you using iNav?
@@JoshuaBardwell Thats the point, too. I'm using BF & inav. But the issue, I'm having with the missing icon, is BF (4.4). "Climb rate" is a really nice osd feature for flying 7" longrange, right?!
I just repeated trying to put 2 osd fonts on my VRX.... no succes 😞
I just updated to 32.37.10. Still having these two problems xD
Climb rate works now on OSD.... I had to type in "VARIO" when flashing BF4.4 in the "UserDefines" - field.
Walksnail users !
as of firmware 34.40.15 the files are to be copied on a folder 'userfont'
I have this working fine on my 2 Babyhawks (BF 4.2.5). I just put WTFOS on my Explorer LR4 (BF 4.2.8) and some of the GPS elements are blinking rapidly (altitude, speed) and my distance to home and distance flown are not displaying at all. I'm using FakeHD and the positioning is correct. Any ideas?
Turn off compass fixed this for me
Idk if anyone else ask or if everyone already knows lol can you do this on analog that would be awesome
You can change the font on analog, but it's all lower resolution.
Are they a little crispier than before even on analog? Or no difference?
@@JoshuaBardwell flipping awesome I don't mind bad resolution it happens I just thought how cool it be to have custom osd thank you JB
Wish this would work with o3 and v2 goggles :(
So Goggles 2 is stuck in the mud? DJIIIIIiiiii! give the newer goggles cool OSD too!!!
Linux based, I would assume case sensitivity
Fantastic! Thanks a lot, Joshua! 😃
Stay safe there with your family! 🖖😊
seems my prior comment may have been deleted. strange. any reason for this? the only thing I can think of is that is mentioned going elsewhere to see a demo of hdz 1080p. shrug.
If your comment contained a url it may have been automatically moderated by youtube.
@@JoshuaBardwell No URL. Anyway the font previews are a little hit and miss but if they're there it's usually a .png in the same dir as the font zip. There are 2 WS DVR overlay rendering tools for post render for you to check out . Also HDZ 1080p OSD demo for BF 4.4 and INAV 6.0 is on my youtube.
Anyone tried with FlightOne boards?
what a content
And nothing if we have dji fpv googles without WTFOS 😐
Some people have all three digital systems …. No …. Shhhh don’t tell my wife! 😂
I'll keep your secret, if you keep mine..🤫
👏🏻👏🏻👏🏻
Helvetica
uhhh? ALL ?? whats up with DJI O3 ? ahh OK at 3m its being told.. fine. I will wait longer...
I'm waiting for that too. Everyone says DJI will do it, but nothing happens...
Best thumbnail ever 🤣🤣🤣🤣
i want my OSD as un intrusive as possible tbh.
i keep saying, for fpv freestyle of manny kind, you only need voltage, signal and time and maybe a corsair