Candy Color Paint Tutorial (2 methods, 1 goal)
ฝัง
- เผยแพร่เมื่อ 19 ธ.ค. 2020
- Whats going youtube! here is another tutorial for you guys that you can add up to your future projects, pay attention to the methods but of course the CHOICE is yours.. happy building everyone.. peace...
/ @poisongunpla
#clear
#airbrushing
#tutorial
![CAMPปลิ้น | EP.77[1/2] ก็ไม่ได้ชอบเอาชนะ แต่เรื่องอะไรต้องแพ้!!](http://i.ytimg.com/vi/JraaBYOd7I0/mqdefault.jpg)
Nice, good ideia
thanks, brother!
Hi sir love your candy finish! Thank you for making this video! May I ask if you waited 5 mins to paint aluminium after applying charcoal black?
yes since its Lacquer base naman so pwede na 5 minutes
Loving both methods! Can you please tell me what psi your compressor is on for each paints/distance that you spray your airbrush against the part? I want to be able to replicate this effect. Thanks!
thanks for dropping by! I put my psi usually around 20, distance is something you can estimate by the flow of the airbrush but make sure is not too far or too close to the subject.
Always start with a light coating and then follow up after a minute. Goodluck and enjoy the hobby.
ang galing naman po nyan sir nakakatwa naman ang ganda mo ng shinare mo na ito
Magandang buhay! hello po kung gusto mo po ng 20-50 sabskraybers punta ka lang sa aking Laybstrim 8 pm pinas Tym be on time, Nag papaangat po ako ng tyanel, sbhn mo lng po 'invited kabatavlogs" Priority kita ! cooperation mo lang ang kailangan ko tutulungan ko umangat ang tyanel mo! pindutin mo lang ang pikture icon ko para makapunta ka sa tyanel ko..walang masama kung susubukan mo, sa ganirong paraan umangat ang tyanel ko.. libre lang po ito kaya arat na! hihintayin kita ha
.. didikit na dn po ako sayo punta ka po mamaya para madagdagan pa ang sabskraybers mo see you po
thank you po sa pag appreciate sa work ko...
@@koreashottopic so paano?
Love the traditional. Ask ko lang, ano curing time interval per paint? From primer>charcoal black>aluminum silver to dark red?
5 minutes lang bro lalo na pag medyo mainit goods na! 👍
@@PoisonGunpla Owwwh salamat kala ko need pa fully cured bago mag next session
@@joenieroque8113 no need. na yug primer 24 hours kasi minsan mga un even surfaces need mo pa e sand
Hello sir salamt sa tutorial.. ung sa charcoal black/gloss black mist coat din ba gawa ginagawa mo? Di ko kasi naabot ung ganoong pagkaglossy
bro thank you din at nagustohan mo , bale yung mist coat or satin coat ay isa sa mga effects yun depende kung ano gusto ng builder.
Etong dalwa nasa sample ko wala pa top coat dito, para ma achieve mo sya try mo e topcoat na mirror gloss, mas lalo sya kikintab more than pa sa gloss effect.
sorry asking but how low is the psi used ?
ey bro! I usually used 20 psi, distance is not particular, just make sure it is not too close and not too far from the subject. good luck!
Hello po... Pde po palist ng paints n ginamit nyo po for this vid.. ngustuhan ko ung teknik.. sna po mggwa p kau ng mdming tutorials.. like difference ng satin, matte, glossy.. beginner po aq and ngguluhan pko s combination..
hello thank you sa pag reachout, I think nasa pina ka start yung mga paints but sige recap natin
traditional
1. gloss gray primer
charcoal black
aluminum silver
candy red
mirror gloss
new technique
silver primer
candy red
gloss topcoat
all paints I used comes from Armored Komodo Paints
@@PoisonGunpla thankyou po, hoping for more videos and tutorials po..
@@mce925 salamat din po sa pag subay subay, if may question ka pa pls let me know
Sir sana gumawa ka pa ng madaming tutorial sa pag paint at kung nilalagyan pa ng thinner o hindi na
hi brother salamat sa pag reach out, yes ano po gusto nyo na paint tutorial? pwede kayo mag pm agas fb ko Poison Gunpla, and yes nag thin ako nito lacquer base .
@@PoisonGunpla mga step by step sana ser sa mga wla pa alam sa paint baka makagawa pa kyo
@@3DPenPH yes bro dont worry gawan natin yan may tinatapos lang ako, afer nito , ya ang e sususonod ko yung request, dont forget to hit Like and Subsricbe bro. thank you..
@@PoisonGunpla thank u opo naka abang nlng ako sa mga next uplod nyo 😊
@@3DPenPH cge bro ayos din yung mga content mo ha
Boss. Ano gnagamit m panlinis s airbrush? Pwede b thinner or acetone?
bro thank you sa pag reach out, I usually use lacquer thinner yung industrial lang, Mayon ang
@@PoisonGunpla copy brad. Un dn ginagamit k. Easy cleaning cya. Salamat
@@jasperfelipe7840 thank u din bro! goodluck!
sir how do you shake arkom paint po? matagal po ba? sakin kasi prng antagal bago ma mix ung namumuo sa ilalim
hey bro! well usually nangyayari yan sa metallicS. what I usually do is naka up side down ang pag lagay ko shelvings.
Bro sa traditional. Pa list nmn sana ng mga waiting time in between paints use from very first coat ng primer to the last coat ng candy please. Planning to paint my Iron man mark 85. Maraming salamat
Hi bro! no problem ill be glad to help. here are the curing time.
Primer - 24 hours
Charcoal Black (basecoat) 30 mins same as Titanium.
Clear read first coat 15 mins
2nd Coat 15 minutes
3rd coat 15 minutes
Topcoat
Bro I was doing this during sunny days, pag medyo kulimlim may katagalan ng kaunti.
Yun lan ang difference between the two. Goodluck brother!👊
@@PoisonGunpla bro forgive my ignorance first timer talaga lols. 1 coat lang ba ko sa primer and base coat c.black?
@@PoisonGunpla how about yung aluminum silver dba after c.black yun?
@@dcvlogs8200its ok bro, yung primer dapat balot yung piece sa primer, then charcoal black, same process and then aluminum
@@PoisonGunpla ok copy. Thank you. Msg kta pag mag start nko. Oorder pako k moon portable air brush since 2 kits lang nmn ipe-paint ko
Need pa po gmitan ng top coat? S last part?
yes, pwede I suggest use gloss or mirror gloss for extra shine.
Thankyou so much po
@@mce925 you are welcome po
Me link kayo ng air brush +settings tnx po
hi! wala po since I used my old airbrush. but you can check hobbyworkz at shopee