just installed one of these.. few things to note - 1. At 1:58 you mention that there is a video on the cutting if you do a DIY install. I've not been able to find this. 2. The instructions don't tell you to take into account the height of the cassette when calculating the length of the vertical rails for cutting. I cut/installed the cassette, then measured the vertical rail height from base of cassette. 3. If you have clearance problems with latches/handles etc., just spin the cassette so it feeds out the front instead of out the back of the cassette. I had to do this and it works just fine. The curved face of the cassette will be facing outwards, and a flat face will be facing inwards. 4. Be careful with the provided screws for mounting the vertical rails. one sheared off screwing it into pine. 5. Don't forget to install the handle prior to inserting the endcaps on the bottom of the flyscreen, they are hard to get out. Other than that, it works well (our old window is far from square - 880mm wide at top, 885mm wide at bottom - make sure you measure top and bottom and left and right! ), didn't require any tension adjustment - it retracts back up at a controlled speed.
Product is great, however this video and the install manual only shows installation process if the kit has been "pre cut".... If your window is around 450mm wide the tension spring needs to be pulled out and cut down and then you will have to retension....100 extra steps if you order the kit and cut yourself. Please update your install instructions based on cutting the standard kit at home Look at replacing all your casement widow handles and lock bolts as mine all clashed with the screen and side tracks. Product looks and works really well but more info is needed concerning window types and minimum dimensions My windows were all casement type
Hello. Thank you for this good video. I wanted to know how well these screens hold up in windy conditions, how much natural light will be allowed through it and what type of maintenance / cleaning is required for it?
The ezy screens holding up very well in normal winds. They allowed light to come in as any other screens. Cleaning screens once awhile is recommended to stop building dust in it.
Great until I realized it requies drilling holes on window frame! My apartment window frames are metalic...plus its a rental... So are there any options beside drilling holes?
just installed one of these.. few things to note -
1. At 1:58 you mention that there is a video on the cutting if you do a DIY install. I've not been able to find this.
2. The instructions don't tell you to take into account the height of the cassette when calculating the length of the vertical rails for cutting. I cut/installed the cassette, then measured the vertical rail height from base of cassette.
3. If you have clearance problems with latches/handles etc., just spin the cassette so it feeds out the front instead of out the back of the cassette. I had to do this and it works just fine. The curved face of the cassette will be facing outwards, and a flat face will be facing inwards.
4. Be careful with the provided screws for mounting the vertical rails. one sheared off screwing it into pine.
5. Don't forget to install the handle prior to inserting the endcaps on the bottom of the flyscreen, they are hard to get out.
Other than that, it works well (our old window is far from square - 880mm wide at top, 885mm wide at bottom - make sure you measure top and bottom and left and right! ), didn't require any tension adjustment - it retracts back up at a controlled speed.
Thanks for these videos, good no-nonsense content that lays it all out clearly.
Great video. Makes it look simple
so even I could do it!
Awesome to hear it. Appreciated.
Product is great, however this video and the install manual only shows installation process if the kit has been "pre cut"....
If your window is around 450mm wide the tension spring needs to be pulled out and cut down and then you will have to retension....100 extra steps if you order the kit and cut yourself.
Please update your install instructions based on cutting the standard kit at home
Look at replacing all your casement widow handles and lock bolts as mine all clashed with the screen and side tracks.
Product looks and works really well but more info is needed concerning window types and minimum dimensions
My windows were all casement type
Nice product. How would these work with fixed window cranks?
Hello. Thank you for this good video. I wanted to know how well these screens hold up in windy conditions, how much natural light will be allowed through it and what type of maintenance / cleaning is required for it?
I’d still mess it up...are there installation options (for when we’re allowed to stand closer than 2 metres again)?
That's amazing. But where can I buy it and have it installed. I need only for my bathroom window in teal.
The ezy screens holding up very well in normal winds. They allowed light to come in as any other screens. Cleaning screens once awhile is recommended to stop building dust in it.
How about a link in the description to purchase!
How does it work with handles on the window
Great until I realized it requies drilling holes on window frame! My apartment window frames are metalic...plus its a rental... So are there any options beside drilling holes?
Google the magnetic ones. They work well too.
How to order and how about sizes is it available on all size
is this available in USA ?
Do you sell these in NZ?
Where's the link to purchase?
very cool So....where did you get them from?
To purchase ezy screens please go to www.ezyscreens.com.au
Where does the draw string go?
It is attached to middle of the handle to pull the screen down.
Got a video of a face fit
您好，我们制造铝丝和不锈钢丝网窗织机，该机具有产量高，操作方便，保修期长，您可以浏览我们的youtube主页。
⬆️
What, No Alexa control?... Back to the drawing board Lads.