Replacing a bed slide rail on a Coleman Fleetwood pop up camper
ฝัง
- เผยแพร่เมื่อ 9 ก.พ. 2025
- Step by step tutorial on replacing the plastic bed slide rails on smaller Coleman and Fleetwood pop up campers.
Find these rails and more at our webstore, colemanpopupparts.com
Official pop up camper pro merchandise is available! please visit popupcamperpro...
40 inch universal bed slide rails are part number 4747C3691 and found at the following link.
colemanpopuppa...
Thanks for the video, super helpful!
Thank you that helped so much!
You're welcome Lee!
Dat cricket really loud lol 😆
We've got crickets in MD. Live and let live I say. They have their purpose.
@@popupcamperpro no one said kill the crickets, I said they are really loud on the video.
One side of my Fleetwood tucson bed has a shorter slider can I replace e it with a 40 inch slider?
I recommend replacing with the same size David. Even if you have to cut one down.
I know it's off subject but what's the thickest king size mattress on a 2006 fleetwood bayside americana camper
4 inch
We need video for the roller system bed rail. Our 1996 king side roller is broken...thanks
It’s already available!
Are both sides of the bed the same plastic bracket or different I just purchased a used pop up and it’s missing the plastic slides on both beds
Typically but not always. The door placement can change the sizes of the tracks.
Where were you a couple years ago when I needed your videos? Can you do a video on how to repair damaged corners on a popup? Nice videos BTW!
please help - we need to replace a bed rail on our Coleman Tent trailer nd can't find the replacement part ANYWHERE!!!
Colemanpopupparts.com is the place to go!
How about showing how to fix the roller system bed rails? I have 1 that’s stuck or jammed.
Coming soon!
How soon will the video be done? My bed is stuck half way open too. I hope that removing the stops allows me to remove the bed so I can simply replace it with the 1990’s bed rail. But it was wedged in pretty hard preparing to drive home.
Hi, you stopped at the part where you reinstall the bed stops....can you review that?
Sure! Please give us a call for assistance
Don't forget to put the slide stops back in!
That's the problem with replacing parts on campers you later plan to take completely apart. Details can get missed :D
I definitely get that. I'm restoring a '92 Shenandoah; so, I really appreciate all the helpful videos.
Hey thanks for the video , do you know what’s the plastic trim called that goes around the door?
You are probable looking for the door seal. It's part number 4747-4501 and available at colemanpopupparts.com
great video thx!, let me ask you a short one...i have a 1990 chesapeake and the bigger bed slides out too much while sleeping.
is that a rail issue?
thanks for being here for us!.
i'm Jose
Hello Jose! You will want to inspect your bed stop brackets. You may be missing them.
Hello where can we order parts? I have a 1994 Dutchman 1001xs
Check out colemanpopupparts.com for many aftermarket accessories for your pup!
Hey Derek, Can you help me with this repair for one side of a PRE-97 Bed slide replacement?
I will do my best! How may I assist you?
@@popupcamperpro how do you replace a pre-97 slide? just got one and i needs two slides replaced!
have 1985 coleman willamsburg bed rails are off track and no longer working, any suggestions on what to replace with to get the beds sliding and working again?
Lizette, typically new bed rails are in order, and stop brackets. Please give me a call at the shop for more assistance.
Did you say one side has a full length slider and the other side a slightly shorter one? The audio is not the greates.
On certain units yes this is correct. Different floor plans call for different configurations.
@@popupcamperpro a 2005 Fleetwood Tucson?
@@daverozak2448 likely for this model
How I get in touch with you?
How can I assist you?
@@popupcamperpro I building a pool up and slide out canopy camper 2x2 meters and I'm trying to buy a good system for it the slide out and also the pop up system
@@gemaindustries6957 Hmm. There are quite a few options for lift systems and rail slides. I would recommend researching the options, and choosing a system that will work best with your applications.