I felt in love with those animations , once again, as usual. Congrats to Carl Team, it`s not only graphics or dynamics, the conceptualization is amazing.
These videos are great to play in the background during my desk job. I do software, but hydraulics fascinate me. I’m working on a small-scale hydraulic robot for fun, and your videos are a great resource.
I am interested to build a test bench to assure the Servo valves in some of our client assembly ar working properly normally G771K200, this to see if are working properly or need replacing, would you be able to help to build a Digitalised test bench and how can I PM, thank you
Question on the 2-stage flapper valve? There is usually one tiny hole on the jet pipe itself and on the receiver block there are 2 small receiver holes on top of the shuttle valve sleeve. When the armories is magnetized or energized to displace left or right using the flapper wire to displace the flow, does fluid get pushed into one of the 2 small receiver holes?
Your videos are absolutely great! One question: What happens with all the excessive flow from the pump, once the cylinder has settled (=valve closed)? Does all of the flow go through a pressure relieve valve? Wouldn't that create a lot of heat and losses?
Actually in industries , there is unloading valve for every pump which bypasses pump flow directly to tank in idle conditions, so pump rotates but system pressure will be zero.
Unfortunately we don't have any Moog valves from the D600 series in our collection. We do have customers who use them, so perhaps in time. Lots of great literature to help with those valves in the Moog website.
I felt in love with those animations , once again, as usual. Congrats to Carl Team, it`s not only graphics or dynamics, the conceptualization is amazing.
Servo valves used in EDM ram machines, to control the ram with high precision, initialy was the Moog valves, after we developed ourselves our valves.
Hello there, would you be so kind in sharing more information about these retrofit valves you developed? thanks
your video is a teacher for me. please don't stop uploading videos
These videos are great to play in the background during my desk job. I do software, but hydraulics fascinate me. I’m working on a small-scale hydraulic robot for fun, and your videos are a great resource.
Glad I ran into this video series!
I am interested to build a test bench to assure the Servo valves in some of our client assembly ar working properly normally G771K200, this to see if are working properly or need replacing, would you be able to help to build a Digitalised test bench and how can I PM, thank you
Question on the 2-stage flapper valve? There is usually one tiny hole on the jet pipe itself and on the receiver block there are 2 small receiver holes on top of the shuttle valve sleeve. When the armories is magnetized or energized to displace left or right using the flapper wire to displace the flow, does fluid get pushed into one of the 2 small receiver holes?
Awesome knowledge
How important is the spin on filter 3 Micron up line from Valves?
you are doing great work ,absolute brilliance way to teach
Thanks carl for sharing knowledge.. very helpful, hopefully there is another lecture about hyd
what happen if the drain port to the tank of servo valve been plugged?
Can you plz explain connector terminal point
Hi Carl.. can u make a video on pressure compensator atos kc 011/30
What is the meaning of U/S written on Servo Valves ?
Your videos are absolutely great! One question: What happens with all the excessive flow from the pump, once the cylinder has settled (=valve closed)? Does all of the flow go through a pressure relieve valve? Wouldn't that create a lot of heat and losses?
Actually in industries , there is unloading valve for every pump which bypasses pump flow directly to tank in idle conditions, so pump rotates but system pressure will be zero.
Absolutely awesome sir
Thankyou very much
Cheers
Rob
kindly do made videos on troubleshooting
Continue 24v dc supply for what
could you put in the subtitle settings for Spanish? Thank you so much.
Hi Carl what about Moog D635k servo valve?
Unfortunately we don't have any Moog valves from the D600 series in our collection. We do have customers who use them, so perhaps in time. Lots of great literature to help with those valves in the Moog website.
Thanks A lot Carl for fluid power mechanism. Lunch box is amazing i love it
Great teacher🎉
What has happened here, been a year since any videos
thank you carl. Fantastic Loved it.
Glad you enjoyed it
Hello Mr. Carl,
How I can run two piston parallel same time same speed
I think the easy way and more simple is using a flow divider, especialy useful with gear driven design
Very informative.......love it
Is there any way you can send me a copy of these animations via email?
Thanks
An Atchley Valve.. they don't like trash at all
도움되는 강의 감사합니다
"Whoever first worked that out?" Umm...didn't William C. Moog work that out? Isn't he kind of famous in your circles for that invention?
Thanks Carl.
But I think it will be good if you make videos shorter.
1 h 20 min is too long
I am from Pakistan and I interested in hydraulic
I'm hani from Saudi arabia,.
COOLINGKING truck radiators say hello to u .