Hello! Can you make the pin heatsinks available for purchase on their own? The holes drilled 35mm apart will fit a BJB holder I have for the CXB 3070. It saves time, I won't need to drill/tap extruded aluminum sinks, and I can also reconfigure my area with ease by using individual sinks per COB. Thank you for producing this kit!
+CutterElectronics The price jumped quite a bit over the past day, out of my feasibility. It makes more sense to drill and tap an extruded sink, even with the rollitup discount. The price of the sink was $25 each, now $31 each? Can the price be brought to what it was before? I'm unsure exactly what the price was, but they seem much more expensive than they were before.
I have an old fixture that houses a single cob. I opened it up and put the meter on it. 95v dc output from the driver. .47 amps Verified with a kilowatt that it is pulling 45 watts with the active cooling unplugged Active cooling pulls an additional 1.1 watt What is the best single Cob I can put in this fixture that will be compatible with the unmarked driver I have? I want to run a cree cxa3590 72 volt 3500k or a free cxa3070 3500k Please make a recommendation on an efficient cob that will work with my current driver if the two listed above will not work. Preferably 3500k Thank you!
Hello! Can you make the pin heatsinks available for purchase on their own? The holes drilled 35mm apart will fit a BJB holder I have for the CXB 3070. It saves time, I won't need to drill/tap extruded aluminum sinks, and I can also reconfigure my area with ease by using individual sinks per COB. Thank you for producing this kit!
www.cutter.com.au/proddetail.php?prod=cut2902
Was this the sink?
+Alex T
Hi Alex
Yes thats the one
+CutterElectronics The price jumped quite a bit over the past day, out of my feasibility. It makes more sense to drill and tap an extruded sink, even with the rollitup discount. The price of the sink was $25 each, now $31 each? Can the price be brought to what it was before? I'm unsure exactly what the price was, but they seem much more expensive than they were before.
+Alex T
Hi Alex
Are you talking USD or AUD?
+CutterElectronics Thank you for replying. I was referring to USD.
I have an old fixture that houses a single cob. I opened it up and put the meter on it.
95v dc output from the driver.
.47 amps
Verified with a kilowatt that it is pulling 45 watts with the active cooling unplugged
Active cooling pulls an additional 1.1 watt
What is the best single Cob I can put in this fixture that will be compatible with the unmarked driver I have?
I want to run a cree cxa3590 72 volt 3500k or a free cxa3070 3500k
Please make a recommendation on an efficient cob that will work with my current driver if the two listed above will not work. Preferably 3500k
Thank you!
Flower Shaman
How can I help you