Thank you. I did it just now. What I did for dpad I took my son's Lego and cut it up where the circle at then put 3m tape put everything back. It works fine. If the 3m doesn't last long I'll glue it. Thank you again 😊
I’m going to be attempting this mod on a ps5 controller. Really wish you showed the mods you made to the green piece. Can you measure how thick you made the d is filler piece?
I like the change of thumb pads...I hate the stock ones on the PS4 controller..but man that directional mod you did....definitely don't like that at all.
Jinx Canada same iven though I am a big PlayStation fan I hate them to if enybody lives in the U.K. Go to Asda and buy the blue and black cover grips and the best thing about them is they are really gripy and only cost £3-4
Is there any way you'd be willing to sell this? Whether it be a service to send in an existing controller or pay the price of the controller plus the cost of these mods, please let me know!
Anyone think swapping the magnets out of the green dpad into a custom 3d printed dpad would clean things up a whole lot, im contemplating getting another ps4 controller and doing that to make it look good and fit well
Hello, do you know how I can print the part that the control needs so that the one that is printed in 3d works? Do you have any link where the design comes out and be able to print the piece that it occupies? I would appreciate it a lot since I tried and it did not work for me since I did not have the necessary piece, well, your help would be very useful, thank you very much
Dot-Ot Gaming no all advice is perfectly welcome thanks for the advice I was thinking of that but I have never painted a magnet before so I wasn't sure what it would do like if the paint would crinkle, or rub off, etc
Nice vid, i came out with my own version of the d pad basically i glued everything together cause i was having issues with the elite dpad sliding out of place making it sort of loose. I will like to know how yours is holding up, considering that you keep it trough
Its so nice but I'm scared to cut this small piece of the Ps4 D'pad out and put it under the green of the xbox! Can you show all you did a little bit better, that we could recognise all steps!!?? Please!!!!! Its the only vid on TH-cam
Hey, have you ever thought of a way to swap the dead with the left analog stick? I am interested in something like this, where the analogs and dead is placed like the xbox one. I am currently using my Elite controller on the ps4 with a converter, but if this is possible, I would be interested in doing this.
Hello, do you know how I can print the part that the control needs so that the one that is printed in 3d works? Do you have any link where the design comes out and be able to print the piece that it occupies? I would appreciate it a lot since I tried and it did not work for me since I did not have the necessary piece, well, your help would be very useful, thank you very much
what did you do to sort out thumbsticks sticking ? my right stick is sticking when moved down just like yours. I have pushed them down as far as i can.
So I tried the mod and I love the thumbsticks! I can get the DPAD in but it's stiff and doesn't move, it KINDA presses but left sometimes is a left up register so Battlefield left for gadget resisters as up for gas mask. How do I improve this?
joey butler it depends, what ever your friends have, get that. if that's not a factor, then ps4 all the way. I have both ps4 and xbox one, and from first hand experience I would defonitly recommend the ps4
John Tran Dealonow Replacement Swap thumbsticks Fits for XBOX ONE Controller Xbox One Elite Controller s.aliexpress.com/jyei6fIn (from AliExpress Android)
hey curious consumer can u show how u cut down the d pad that went on top of the Xbox one I've tried doing it my self but I keep breaking the plastic or could u make me one and I'll buy it from u please help me
+Trevor Waller, Unfortunately I don't have any footage of the cut, but I used a dremel type of tool and cut the bulk off the top of the PlayStation 4 d-pad then sanded the rest until it fit with the green d-pad on top. It was a lot of trial and error until I got it right. You just have to make sure you don't cut the posts on the bottom of the peace you are shaving down. I hope that helps a bit.
WallE23 i have done this mod myself, and while a dremel makes it easier it is not necessary. i used a sheet of sandpaper to sand down the edges, and the old dpad and i used scissors to cut out the cross.
travis fowler Dealonow Replacement Swap thumbsticks Fits for XBOX ONE Controller Xbox One Elite Controller s.aliexpress.com/jyei6fIn (from AliExpress Android)
Theofilos Grigoriadis This should be possible on any PlayStation controller but be careful with the clips on the side of the controller and the ribbons on the inside of the controller
You chose to do this, he didn't break it, he just showed how to mod it, its not his fault u weren't smart enough to follow his tutorial. Also, there should be a comma between you and you!
Technicaly you don't have to do any of this. Why you ask because you're just ruining your PS4 controller but I guess if you do want to ruin you're PS4 controller go ahead and do it
Tried this mod out did the exact same thing you did! Works nice and I love it!!! Keep up the creativity!
Thank you. I did it just now. What I did for dpad I took my son's Lego and cut it up where the circle at then put 3m tape put everything back. It works fine. If the 3m doesn't last long I'll glue it. Thank you again 😊
Awesome tutorial, super easy to follow, I did the thumb pads as well as the d-pad and everything works well. thanks for the video! :)
Jordan Crowe did you sand down the old dpad as well? If so, how thick was it when you were done?
"Daddy easy " lol 😂
you should paint the green magnetic dpad in black
I did this to my ps4 controller, all of my friends want to borow and use it, and it works perfectly
Nice vid this will help me a lot thanks
I’m going to be attempting this mod on a ps5 controller. Really wish you showed the mods you made to the green piece. Can you measure how thick you made the d is filler piece?
I like the change of thumb pads...I hate the stock ones on the PS4 controller..but man that directional mod you did....definitely don't like that at all.
Jinx Canada ...... its called how to mod your controller so what do you think he is gonna do
Jinx Canada same
Jinx Canada same iven though I am a big PlayStation fan I hate them to if enybody lives in the U.K. Go to Asda and buy the blue and black cover grips and the best thing about them is they are really gripy and only cost £3-4
Jinx Canada I agree mate. I like what he was going for, but I don't like the end result
Do you think you could point me in the direction of the alternate
tutorials for adding the xbox elite d-pad on the ps4 controller?
Minibro11 go back to part 1
Curious consumer... Can you tell me what attachment on your Dremel did you use to cut away the cross section at the d pad on the ps4 controller?
I like it I will watch part 3
one thing I like about my xbox one is the d-pad are tactile button not squishy
Is there any way you'd be willing to sell this? Whether it be a service to send in an existing controller or pay the price of the controller plus the cost of these mods, please let me know!
Anyone think swapping the magnets out of the green dpad into a custom 3d printed dpad would clean things up a whole lot, im contemplating getting another ps4 controller and doing that to make it look good and fit well
Hello, do you know how I can print the part that the control needs so that the one that is printed in 3d works? Do you have any link where the design comes out and be able to print the piece that it occupies? I would appreciate it a lot since I tried and it did not work for me since I did not have the necessary piece, well, your help would be very useful, thank you very much
+The Curious Consumer if I were to paint the directional pad magnet piece what type of painting method would you recommend?
Jerel McPhearson sorry I'm not the person you are trying to contact but I would use a matte black spray paint.
Dot-Ot Gaming no all advice is perfectly welcome thanks for the advice I was thinking of that but I have never painted a magnet before so I wasn't sure what it would do like if the paint would crinkle, or rub off, etc
that's sick thank u will be doing the d-pad part. already did the sticks part and love it have to dremel mine 2.
Nice vid, i came out with my own version of the d pad basically i glued everything together cause i was having issues with the elite dpad sliding out of place making it sort of loose. I will like to know how yours is holding up, considering that you keep it trough
Its so nice but I'm scared to cut this small piece of the Ps4 D'pad out and put it under the green of the xbox! Can you show all you did a little bit better, that we could recognise all steps!!?? Please!!!!! Its the only vid on TH-cam
Hey, have you ever thought of a way to swap the dead with the left analog stick? I am interested in something like this, where the analogs and dead is placed like the xbox one. I am currently using my Elite controller on the ps4 with a converter, but if this is possible, I would be interested in doing this.
Hello, do you know how I can print the part that the control needs so that the one that is printed in 3d works? Do you have any link where the design comes out and be able to print the piece that it occupies? I would appreciate it a lot since I tried and it did not work for me since I did not have the necessary piece, well, your help would be very useful, thank you very much
what did you do to sort out thumbsticks sticking ? my right stick is sticking when moved down just like yours.
I have pushed them down as far as i can.
Nice video dude, keep on It! it really helps a lot.
Dude lose the music or turn it down drastically because it should only be present ambiently, it is very distracting on a TUTORIAL VID brother
how do u get the modding equipment??
So I tried the mod and I love the thumbsticks! I can get the DPAD in but it's stiff and doesn't move, it KINDA presses but left sometimes is a left up register so Battlefield left for gadget resisters as up for gas mask. How do I improve this?
Is there any way to get that tactile feeling back with the L3 R3?
Hey I was wanting to know your opinion for Christmas I was wanting to get a PS4 or a Xbox 1 which do u think I should get
joey butler it depends, what ever your friends have, get that. if that's not a factor, then ps4 all the way. I have both ps4 and xbox one, and from first hand experience I would defonitly recommend the ps4
joey butler i think they are both great but i chose ps4 because the most people have ps4
joey butler i mean i know they are both great
good choice dude
Yea i recommend ps4 but you could get xbox if you want to
May I please Buy the Elite PS4 controller and I don’t have a lot of tools to do it my self.
I have probelem when i press thw d pad and try to circle it dont circles perfectly but only with pressing
Where do you get your elite parts?
John Tran Dealonow Replacement Swap thumbsticks Fits for XBOX ONE Controller Xbox One Elite Controller
s.aliexpress.com/jyei6fIn
(from AliExpress Android)
There are some by eXtremeRate on amazon too
hey curious consumer can u show how u cut down the d pad that went on top of the Xbox one I've tried doing it my self but I keep breaking the plastic or could u make me one and I'll buy it from u please help me
+Trevor Waller, Unfortunately I don't have any footage of the cut, but I used a dremel type of tool and cut the bulk off the top of the PlayStation 4 d-pad then sanded the rest until it fit with the green d-pad on top. It was a lot of trial and error until I got it right. You just have to make sure you don't cut the posts on the bottom of the peace you are shaving down. I hope that helps a bit.
The Curious Consumer is there any way u would sell me one because I'm only 17 and I don't have any tools that could sand it down
WallE23 i have done this mod myself, and while a dremel makes it easier it is not necessary. i used a sheet of sandpaper to sand down the edges, and the old dpad and i used scissors to cut out the cross.
I would spray paint the green thing black
tried exactly same changed shell frm white to chrome green dpad was stuck the dot one is flat
Tbh I can’t believe no one actually does a mod kit for the PS4 controller
are you selling any? I'd like to buy one
Are u wrench?
so how much would this cost to get just for the parts?
travis fowler Dealonow Replacement Swap thumbsticks Fits for XBOX ONE Controller Xbox One Elite Controller
s.aliexpress.com/jyei6fIn
(from AliExpress Android)
do the triangle zero x and sqare
wheres the link for your guy?
I'm suprised that nobody has made a Elite mod for a PS3 controller
CasperTheMarioForeverFan why. Ps3 controller was shit and if you could afford an elite controller you can afford a ps4
2:05 how many controllers do u have 🤣😅
You can never have too many controllers
@@L0wered_G35 Unless you have more than 4
@@edgarvega5859 lmao
can someone help me out with that I'm looking forward to doing this
is tihis possible on a ps3 controller? THANKS!
Theofilos Grigoriadis that's what I'm wondering
Theofilos Grigoriadis This should be possible on any PlayStation controller but be careful with the clips on the side of the controller and the ribbons on the inside of the controller
the d pad green part is aids
Good
Lose the music so we can hear next time please. Love the vids (besides the music)
awesome
Where I can buy this items?
amazon or ebay, just search xbox one elite controller replacements
thanks dude
From watch dogs 2
Nice
Thank you you make broke my controller now I have to buy a new one
《XALTERTIMEXX12》 1211 it's your fault for doing it so don't hate cause u dumb
《XALTERTIMEXX12》 1211 you broke it not him idiot
You chose to do this, he didn't break it, he just showed how to mod it, its not his fault u weren't smart enough to follow his tutorial.
Also, there should be a comma between you and you!
《XALTERTIMEXX12》 1211 why!!!!!!!!
Tyler Hoekstra your reply got more likes than his comment
4 partes para cambiar un botón? Ridiculo
kiko martin si pones atension el abla porque iso otra parte
nicee😎
Cool
EVERYONE ITS NOT HOW TO REPLACE PARTS ITS HOW TO MOD YOUR CONTROLLER
Uh... duh.? It says it on the title
Can u make one for me and I'll buy it ?????
Technicaly you don't have to do any of this. Why you ask because you're just ruining your PS4 controller but I guess if you do want to ruin you're PS4 controller go ahead and do it
Wow man
Make a Xbox 360 elite controller
s a l u A C u. , oc . l c Cj. 1 1
l
600th like YES
aaaaa
when u need XO to make ps4 better -_-
That controller looks aweful man lol
Oh wow I made a typo. Get a grip you mellon head moron.
Muted
RLS-GAMING muted? I'm sorry but I was sleeping at 4am