My dad used to lay the bearings in the freezer before installing. I have added heating the cases, they just slip in there. Nice job, I am enjoying these videos!
Everything vapor blasted looks amazing. At the moment I just polish everything I can with a dremel and buffing wheel. Still looks good, but definitely a step below that vapor blasting.
Yeah I honestly wasn't even planning on getting anything vapor blasted, but a buddy said he'd give it go for cheap, so I went for it. I think I would do it again and pay someone full price for the time savings alone lol
Okay, I see youre from Akron area. I am also from the area. Id like to know who youre using for powdercoating, annodizing, vapor blasting, etc. Im working on a kx250f rebuild.
I've never had a problem with namura pistons either. Actually they seem to last longer than je pistons for me. All the bikes I've put namura pistons in still run...lol.
Why wouldn't you of put new lower end bearing's in if you already have the case split open and torn apart. Still good I would of still replaced them and kept the old ones as back up's.
Money. Would have been over $100 just in those bearings. This is still a bike I am planning on flipping and making a profit on, so I couldn't do everything. After inspecting the bearings, they all checked out good so I made the decision to reuse them.
Looks good man. Wanted to call you out for not using a crank puller but you redeemed yourself by using a Motion Pro special wrench on your cylinder base nuts (most just use a wrench and don't torque them) so I decided to give you a break...lol J/K
Haha I've honestly never used or felt like a need to use a crank puller. I do use that cylinder wrench all the time, just gotta make sure to do the moment calculations beforehand to get the torque numbers converted!
@@MattBerger02 forsure, been rewatching all your old rebuild videos. It would be awesome if you could do a buyers guide when negotiating for dirt bikes. The summers coming up and i'm really wanting to pick up an 01 cr125r.
I've personally never had issues with Namura pistons, but from now on I will be using ProX and Wiseco pistons. It's worth the extra $25 to have that piece of mind!
![ลองสุ่มไอโฟน 990 โกงมั้ย? [ โกงมั้ยครับ ep.101 ] | DOM](http://i.ytimg.com/vi/bfsWe0j492k/mqdefault.jpg)
This channel is getting better and better every video! I can totally see this channel blowing up someday
I appreciate that man, thank you!
Matt Berger no problem. Keep doing what you are doing and I will always stick around 👍🏻
Hey Matt , where did you get the vent lines for the carburetor?
I’d have agree keep up the good n pump some content love em
My dad used to lay the bearings in the freezer before installing. I have added heating the cases, they just slip in there. Nice job, I am enjoying these videos!
The little finishing touches fresh bolts new fuel breather hoses make all the difference.
Great video mate.
this is so satisfying to watch, im so happy i found you
Rebuilding my RM 125 bike…exactly what I was looking for 😭
Everything vapor blasted looks amazing. At the moment I just polish everything I can with a dremel and buffing wheel. Still looks good, but definitely a step below that vapor blasting.
Yeah I honestly wasn't even planning on getting anything vapor blasted, but a buddy said he'd give it go for cheap, so I went for it. I think I would do it again and pay someone full price for the time savings alone lol
How do you get them to stay looking like that though once the bike is being ridden?
very toughhh🥵😍from this you definitely help give me an idea of how easy it the rebuild is
It is easy! Just take your time and watch TH-cam videos!
This was a really great video. Mad props man.
I appreciate it
That engine looks amazing great job
I love how you reuse what you can instead of buying new
This will help alot with my suzuki rmx project
Build is looking great, I just picked up a 97 CR125R to rebuild
Thanks, good luck!!!
Very good job keeping it stock
I love a good stock/clean look
Matt Berger me too
Clean motor build man! Can't wait to hear it rip!
Haha thanks, me too!
Great content man! Were the sealing surfaces covered during vapor blasting? Couldn't tell from the video. Awesome job👍💯
So grateful for this channel learning allot 😁
Happy to hear that!
Looking sick! Good luck with the contest!
Thank you!
HEY, very cool video! well done! one question, where did you find the manual to download?
Powder coating on the covers looks awesome.
I know, they turned out so good!
honestly wish there was someone around me who would rebuild my bike to this quality and i just pay them for there time
Okay, I see youre from Akron area. I am also from the area. Id like to know who youre using for powdercoating, annodizing, vapor blasting, etc. Im working on a kx250f rebuild.
You do great work sir. Love the videos!
Its coming along pretty damn clean
I'd say so lol thanks man!
I am not able to ride or rebuild a dirt bike because I am too young but still I love to watch these videos
One day!
can u give ma a link to the carb hose i really need them and i cant find the right one
Awesome job!
Bike is looking great 👍 lovin the channel too.
Thanks!
Where did you learn how to rebuild engines this is so inspiring, I do body work but I want to get into rebuilding bikes and quads sooo bad
everyone hear gonna watch this guy blow up. great content.
Means a lot. Thanks!
need more bike flips
Why you dont use the tools to instal the engine case? And why you dont use assembly lube?
I need your help bud on a rebuild, are you located in Pennsylvania ?
Nice vapor blasting how can I do that?
LIT!!!
Damn dude that looks fresh as f👌
Wait till you see the rest of the bike...
@@MattBerger02 Looking forward to it 🤙
Man I wish my wife would let me do something like this.......F it ima do it anyways!!! Love your videos!
Do it!!!! haha
do you have a link to the Honda OEM carb vent tubing?
i'm having a hard time locating it.
I love so much your channel 💯
Thank you!!!
What is a motor rebuild like you did cost
Material and labor
I've never had a problem with namura pistons either. Actually they seem to last longer than je pistons for me. All the bikes I've put namura pistons in still run...lol.
How do you know what to torque certain bolts down to ?
Top man
Appreciate it!
Great video but not much for ultimate 2 stroke build lol lots of cheap or stock parts haha . Like even reused the clutch plates and springs 😮
Heat the cases FREEZE the bearings
looks mint! whered you get it vapor blasted?
A buddy who works at a local collision repair shop did it!
yo matt what is the diamter for the carb hoses
I came here to figure out what’s the deal with water pump. My engine is a 1999 and water pump is not externally serviceable. Gotta split cases
What size hone did u use?
Got the same bike year and all want to see what u got going on
Get ready for the next video then...
What year is this?
do you have the serial number for the oem pink hoses?
Let me do some looking and I'll let you know!
How do you not have more subscribers??
Takes time to grow! I'm going to keep putting out content and see where it takes me!
@@MattBerger02 I will be with you all the way to the top keep up the great content and never give up 👍
Why wouldn't you of put new lower end bearing's in if you already have the case split open and torn apart. Still good I would of still replaced them and kept the old ones as back up's.
Money. Would have been over $100 just in those bearings. This is still a bike I am planning on flipping and making a profit on, so I couldn't do everything. After inspecting the bearings, they all checked out good so I made the decision to reuse them.
Fair enough.
does it matter the order for the clutch
It must follow the correct order of steel/fiber plates. But in most cases, the direction of the plates don't matter
How long did the ktm take to rebuild
About 2 months
Looks good man. Wanted to call you out for not using a crank puller but you redeemed yourself by using a Motion Pro special wrench on your cylinder base nuts (most just use a wrench and don't torque them) so I decided to give you a break...lol J/K
Haha I've honestly never used or felt like a need to use a crank puller. I do use that cylinder wrench all the time, just gotta make sure to do the moment calculations beforehand to get the torque numbers converted!
what torques wrench do you use?
Believe it or not, I use Harbor Freight... I've done a bunch of research and they work very well for me.
@@MattBerger02 forsure, been rewatching all your old rebuild videos. It would be awesome if you could do a buyers guide when negotiating for dirt bikes. The summers coming up and i'm really wanting to pick up an 01 cr125r.
Sou Do Brasil E Tenho uma Dessa Aii
Eny one got a barrel for a 2000 model for sale plz help me
When I saw you hitting the ball bearings with the hammer, I turned it off
Guys can u write me a online market for suzuki?
The piston you got is ok but wisco pistons are way better and not to expensive
I've personally never had issues with Namura pistons, but from now on I will be using ProX and Wiseco pistons. It's worth the extra $25 to have that piece of mind!
Yeah pro x are pretty good to and im loving these vids keep it up👍
Freeze your bearings bro
Why freeze Jeffrey?
Manda Te WhatsApp
Worst instruction video out there