How to fix Cab Corners GMC Sierra Chevrolet Silverado

A quick video detailing how I (a guy with average shop skills) replaced my rusted out cab corners on my "Trusty Rusty" 2005 GMC Sierra Z71 (without removing the bed). Slip on method.
Products I used...
Cab Corners amzn.to/3a5Uk2d
Panel Bond amzn.to/3wP6iHm
(Affiliate links) As an Amazon Affiliate I earn commissions from my links these small commissions help me to produce the helpful content on my channel
Video on rocker panels: • How to fix rocker pane...
If you found this video helpful and would like to show your appreciation hit the ($Thanks) button to leave a tip! :)

[@hellomyson6886]

Thank you for being one of the very few TH-camrs that get straight to the freaking point

[@hemlocktree1]

Thanks for the concise and simple video. A lot of folks on Yuo Tube University want to include a lot of blah blah blah that just makes me fast forward through. One idea, one product reccomendation. I am going to cut a strip off the cab corner replacement and epoxy it on the inside lapping over the cut edge on the truck. That will give me someting to bond to on the top edge of the replacement. 3M Panel Bond has glass beads so you can't squeeze out too much. Also come in small sizes so you don't have to buy $120 worth of epoxy.

[@hancockbrewer1465]

Thank you. That’s what I needed a diy that ain’t gotta be perfect.

[@bikermike]

Exactly my intentions for a 17 year old truck! 👍

[@peterhammond2704]

I just got an 05 Sierra and this is what I’m going to do. Thank you!

[@bikermike]

Glad this gave you some ideas, cheap and simple for an older truck repair!

[@odelldickey2218]

Thank you for your time in making this video . Good helpful information.

[@Insensitive.customs]

Thank you for this video sir, is going to help alot

[@DoesItTho]

Good work!!! Never understood the static people give for illustrating functional repairs. Folks, for the women most of you go with, this more than adequate. Why go Barrett Jackson level on the repairs for a vehicle that’s a salt eater?

[@bikermike]

Thanks man! That was the exact point of the video! Just wanted to keep ol "Trusty Rusty" looking respectable without spending too much time and money.

[@llelewwewe6663]

I like this way looks fairly quick and easy. Just the glue at the back and bottom? If you have to do corners and rockers what would you do first?

[@bikermike]

I would do rockers first but it probably doesn’t matter too much. I welded in my rockers though. Panel bond likley do the job too if have enough good metal for it to bond to. Just screw it in place while it adheres.

[@4dirt2racer0]

if ur doing this repair, beat everything with a hammer to get the rust broke free before u waste any wire wheel or time on it i even use screwdrivers to get back in hard to get to areas

[@sammulder9429]

Thanks man super helpful!

[@Stoneyx420]

nice video man just a tip if you grind away the paint on the truck where you want to weld it wont burn the paint and let off toxic fumes and also gives you a more cleaner and stronger welds

[@bikermike]

Thanks! It's just a 17 year old rust buggy repair though.. Not the STS 135 ;)

[@Stoneyx420]

Just looking out for your health safety third!! We don't need ya getting sick on us you need to put out more sweet videos

[@molly18239]

Dang!! Thats how its done!

[@lugenbeel123]

Dude, thank you!

[@bikermike]

Hope it gives you some ideas and helps ya out!

[@RedMtRock]

Great Job!

[@robertsmith987]

Beautiful easy diy friendly

[@bikermike]

Thanks Rob!

[@stevebillow395]

Was your truck extended cab. That's all I can find on cab corners. Not sure if they all the same

[@bikermike]

Mine is crew cab. I think it’s different from extended cab

[@orangedyess8507]

Steve did u find out if there all the same I have a single cab and cans only find ex cab and crew

[@stevebillow395]

@@orangedyess8507 I still ain't fixed mine all I found was ex cab also

[@raviolisauce103]

what kind of undercoating did you use? i like the look of a brush on

[@bikermike]

Monsta Liner

[@raviolisauce103]

@@bikermike Thank you, how well has this coating held up in the past year?

[@percussion4U]

Good job...Thanks

[@rorynelson4281]

Yo this is amazing man thanks 👌🤘😎

[@isaacchavez2276]

Nice 😮

[@bikermike]

Thanks 😊

[@Rollingwithkenny]

Damn it looks good💯💯

[@bikermike]

Thanks man! just an average guy with average shop skills and limited funds. Anybody can do it with a bit of ambition..

[@Nat-O]

What kind of welder did you use?

[@bikermike]

Small Lincoln 120volt mig

[@LewisJohnsonIII]

Why does the guy round me think he has to remove the box? 😢

[@randomshortz17]

Why are cab corners such a big deal?

[@4dirt2racer0]

iv never seen anybody glue and weld it, usually they do one or the other

[@barrymcockinner689]

I choose to just weld

[@rgngates8657]

I will pay you however much you want to do mine haha

[@bikermike]

It just takes a bit of time. ;)

[@cdanosdrums4966]

Song ?

[@bikermike]

In description.

[@clinteast7476]

That is Hack JOB. tbh.

[@RayC-n1h]

😂 hell no

[@kkarthun2438]

Do not do this shit 😂😂