I have just done this today, having watched the video about 6 months ago I came back and got a lot of help out of rewatching how you did it. It was a bit harder because I still had the side panels and the front crossmember above the chassis cross member of the body installed. I also did it on the road in my rental engine crane Wheels keep sinking into the tarmac. I had to lift the engine and transmission up having taken notes on where you put them in your video push the car under the engine lift it up on the. An hour's fussing around later and I had it in. Great video much appreciated it helped me a ton.
That green block sensor is only for the glow system which I didn't see the pre heater in the 12ht rebuild video. I'm not running the glow in my 60 cause I haven't pulled all the wiring for the glowing. 3f to 12ht Edit: I commented before your explanation at the end, Awesome job on the loom man 👍
Great effort mate and skills all-round. Full time job just editing the video let alone ripping apart everything and rebuilding. I bark my knuckles just doing an oil change. Keep me posted on the finals.
awesome work....bloke enjoying whatching your videos so far.....12ht looking good so far fitment ect....i have the 75 series ute 1hz garret turbo im making it into full tourer ..i love the old land cruisers have a 60 series as well
The finish on that raptor is exactly what im after, what psi did u run the compressor at through the hvlp gun and what was your thinners to raptor ratio
Mate ur doing a cracking job. I’m running my wires now wish i did that before installing my loom. I’m having trouble with wiring the vsv and a few other bits, I’d like to see how you did it so i can do the same.
Should have chucked a 4 cylinder common rail more power and torque,with twice the econo y,and a coil with airbag front and rear ,then with custom suspension kits you can sell, start a business converting every leaf sprung toyota in the country,quickly and cheaply,just a thought,market out there is begging for it but unlike the states(US) where you can buy suspension conversion kits any fab shop can install,ARB and all the other dills deadset asleep at the wheel.
Again thank you,, from Tanzania 🇹🇿
Would love to see the wiring harness rebuild video 🤙
Hey mate i love watching your videos keep up the great work! I would live to see the video on how you did the wiring loom!
Just binged this in one day now I have to wait a week 😂
Love to check out your wiring harness vid legend. 👌
Brilliant effort mate. Credit to you for doing this all yourself in the backyard! Keep up the videos.
Yes mate. Would like to see the wiring video
I have just done this today, having watched the video about 6 months ago I came back and got a lot of help out of rewatching how you did it. It was a bit harder because I still had the side panels and the front crossmember above the chassis cross member of the body installed. I also did it on the road in my rental engine crane Wheels keep sinking into the tarmac. I had to lift the engine and transmission up having taken notes on where you put them in your video push the car under the engine lift it up on the. An hour's fussing around later and I had it in. Great video much appreciated it helped me a ton.
Can’t wait to see the wiring video thx
Would love to see the wiring harness video 👍
Daaaaaaamn!!!! Binged watched these videos!!!! Sooooooo good!!!
Geyser Systems awesome mate glad you enjoy! Cheers for watching 🤙
Just came across your videos mate. Bloody loving it!! Awesome work 👍
mate that paint finish looks on point!
Great videos mate, I’m keen for a more detailed wiring video.
That green block sensor is only for the glow system which I didn't see the pre heater in the 12ht rebuild video.
I'm not running the glow in my 60 cause I haven't pulled all the wiring for the glowing. 3f to 12ht
Edit: I commented before your explanation at the end, Awesome job on the loom man 👍
Great effort mate and skills all-round. Full time job just editing the video let alone ripping apart everything and rebuilding. I bark my knuckles just doing an oil change. Keep me posted on the finals.
Good work mate!
Love the videos man! Can't wait to see you start it up 😍
Dude, this is gonna look siiick haha
awesome work....bloke enjoying whatching your videos so far.....12ht looking good so far fitment ect....i have the 75 series ute 1hz garret turbo im making it into full tourer ..i love the old land cruisers have a 60 series as well
would love to see the wiring video i'm 17 and doing a 40 series on 80 series chassis build
Keep it up mate 🤙
Hey mate love the build, how did the raptor in the tunnel handle the heat from the exhaust side?? Cheers 👍
The finish on that raptor is exactly what im after, what psi did u run the compressor at through the hvlp gun and what was your thinners to raptor ratio
Love the vids mate!
Mate ur doing a cracking job. I’m running my wires now wish i did that before installing my loom. I’m having trouble with wiring the vsv and a few other bits, I’d like to see how you did it so i can do the same.
What engine mounts you use
Old ones off the 2h ?
Apparently they are different ?
Need to rebuild power steering pump. Anyone know how many bolt (4 or 6 in 12 HT or Link to full kit with which bearing is needed.
Should have chucked a 4 cylinder common rail more power and torque,with twice the econo y,and a coil with airbag front and rear ,then with custom suspension kits you can sell, start a business converting every leaf sprung toyota in the country,quickly and cheaply,just a thought,market out there is begging for it but unlike the states(US) where you can buy suspension conversion kits any fab shop can install,ARB and all the other dills deadset asleep at the wheel.
You're a WEAPON