i kinda wish the two sides would stay in sync. still pretty sick tho. i know this isnt really feasible for most, but you can always go custom. i did some custom ones… super solid, run patterns as well as full color, and can be controlled with an app. can be found on my channel
I have a set of Glowjobs on my GT, really cool! I also built out my own underbody RGB kit that is powered by a USB power bank with a remote, that REALLY puts down some sick color. I can't grind curbs with it but I'm not really into that. I also added my own LED bike headlamp to the front of the board with a custom made bracket, it's insane for night visibility. Lights make the Floatlife brighter! :D
Micro USB, I might have a spare cable if those laying around😂 I wonder if they'll work with the new TFL Float Blocks or the Ice Blocks that 1WheelParts have on pre-order.
Whenever I watch one of your videos and I see your face I instantly think of Chris Rock. You look exactly like him in a different skin tone. Love the vid btw!
Hey Tom. I'm no IP waterproofing expert, but I wouldn't get these near water. The rubber Micro-USB flap doesn't always stay in place, and you can clearly see an open gap where the ribbon cable goes in and out both sides when the hinge is open. Lastly, I just checked my stock XR, they will not fit unfortunately.
Sorry, I was wrong on the price, it was actually $45 + $10 shipping (so $55 bucks). You can also buy a single version for $25. See desc for links!
It seems like they would, but I wonder if these would fit on the FloatWheel.
I got a few friends with FloatWheels, If I have them with me next time I see them I'll test fit them and report back! 🫡
Excellent concept! The limitations, Onewheel upgrade sacrifices, needed to mount it are a big disadvantage.
Yea...I just got the 5" MTE and really bummed I can't use these anymore. Well, I can on one side of my stock Pint 😂
i kinda wish the two sides would stay in sync. still pretty sick tho.
i know this isnt really feasible for most, but you can always go custom. i did some custom ones… super solid, run patterns as well as full color, and can be controlled with an app. can be found on my channel
I have a set of Glowjobs on my GT, really cool! I also built out my own underbody RGB kit that is powered by a USB power bank with a remote, that REALLY puts down some sick color. I can't grind curbs with it but I'm not really into that. I also added my own LED bike headlamp to the front of the board with a custom made bracket, it's insane for night visibility. Lights make the Floatlife brighter! :D
That sounds sweet!!
That’s awesome
And sweet edits, as usual
Micro USB, I might have a spare cable if those laying around😂
I wonder if they'll work with the new TFL Float Blocks or the Ice Blocks that 1WheelParts have on pre-order.
Lol...sooo many!! And ya, they occupy a good chunk of the axle, so I doubt they'll work with any chillers.
Whenever I watch one of your videos and I see your face I instantly think of Chris Rock. You look exactly like him in a different skin tone. Love the vid btw!
Haha, thx, first time I've heard that one! 😂
@@ThatsGinterEV haha . np
I just need to live on that street at Christmas.
Ya...they go all out...
"Filthy animal" It's the home alone season!
Well, I am known to get dirty from time to time 😜
Will it fit the MTE?
Just got the MTE installed and finished a vid on it....and the short answer is sadly, no 😢
@@ThatsGinterEV dang! Just got my MTE today stoked to ride when it stops raining
Website says IP65 Waterproofing. Will these fit with the thicker pads it comes with on an XR??
Hey Tom. I'm no IP waterproofing expert, but I wouldn't get these near water. The rubber Micro-USB flap doesn't always stay in place, and you can clearly see an open gap where the ribbon cable goes in and out both sides when the hinge is open. Lastly, I just checked my stock XR, they will not fit unfortunately.
do they fit your XR as well?
Hey Leo! Negative on the XR. It's too thick on one side, and on the other side....it will rub if you forced it on there.
Do you know if these work with cold ones?
I don't think they will as they occupy a large part of the axel.
What's up ginter! Micro USB? Boooo
Heyoooo! ...and yeah where's that USB-C?!
@@ThatsGinterEV you could probably switch them to usb-c pretty easily. I converted my beats studio 3's (over ear headphones) from micro usb to type c.