ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
I Paid £150 for this! | Can We Fix It? Profit or Loss S1:E24
ฝัง
- เผยแพร่เมื่อ 4 ส.ค. 2023
- Huge thankyou to PCBWay to sponsoring today's video - Sign up here ▶ www.pcbway.com/ PCBWay produce reliable PCBs for customers with demanding needs. Get your quote in seconds, PCBs shipped in as fast as 1 day.
Today I purchased the cheapest PS5 so far, but it had some work done to it previously. Can we fix it and sell it for a profit?
My Website ▶ joeydoestech.com/
Ali Express Equipment and Tools (Affiliate)
💡 Xbox Removal Tool - s.click.aliexp...
💡 Soldering Iron (Updated) - s.click.aliexp...
💡 Hot Air Station (Atten 862D) - s.click.aliexp...
💡 Tweezers - s.click.aliexp...
💡 Xbox HDMI Ports - s.click.aliexp...
💡 TDP158 XboxRetimer IC - s.click.aliexp...
💡 Nintendo Switch IC's - s.click.aliexp...
💡 Nintendo Switch Ports - s.click.aliexp...
Amazon Equipment and Tools (Affiliate)
www.amazon.co....
You can buy my Microscope here ▶ andonstarmicro...
My eBay Online Store ▶ www.ebay.co.uk...
📞 Discord - / discord
📺 Twitch - / joeydoestechofficial
📷 Instagram - / joeydoestech
🙋♂️ Twitter - / joeydoestech
📓 Disclaimers:
All videos uploaded onto my channel are strictly for entertainment purposes only. If you want to follow along one of my guides or how to's, please bare in mind that anything damage caused to your belongings during or after the video is your responsibility. Please think carefully and ensure you are fully competent before attempting to carry out any instructions on my videos. Most importantly, enjoy watching 😁
Joey Does Tech is a participant in the Amazon EU Associates Program, an affiliate advertising program designed to provide a means for sites to earn commission incomes by advertising and linking to Joey Does Tech.
#soldering #repair #profit
Looks like I said the outro twice here! Maybe I just wanted you to have an extra good weekend 😊😊
Hello dude, I love your work, I would like to learn more about electronics and how to fix this kind of stuff, is there any course or recommendation for me to learn how to repair this stuff?
always love to see a repair guy clean EVERYTHING. That mess on the hdmi port gave me chills. how can a repair tech think thats a good way to do business? Good job Joe
Probably didn't have a scope. I've done a few now and they are very hard to do so easy to bridge the pins. If you have the iron on too long it melts the plastic and the solder bridges so might as well start again at that point.
It was really nice of Sony to put that component so close to the pins.
Indeed, so when you replace the port, you lose the component... Fantastic indeed!
started watching these when youtube randomly recommended me one and I've binged literally up until this episode at the time of writing throughout the day. Looking forward to see more! Love how you do your repairs
Love that! Thank you so much :)
Thanks to all your videos i fixed my first dead ps5 yesterday replacing the hdmi ic and fixed hdmi port. Made a jump of joy when it booted and displayed an image. Keep going strong!
3:05 kitty
Also the fact that a ribbon cable for LEDs is more expensive than a HDMI port is hilarious.
9:54 there seems to be a trace between the pads, so any component would be bypassed
Calling yourself an "absolute Egg" was the most british thing i've heard for a while XD
@11:00 you can keep the part and the board warm by using hot air in one hand and soldering iron in the other. Your ground connections will flow easier and you should be able to remove bridges with just the iron, no braid. You can reduce the heat so you don’t melt plastic components or just keep the hot air at a distance. This two handed soldering method has helped me for a long time.
Great work mate! HDMI issues are way too common with those PS5. One question only, why do you place the little cap before touching up all the pins? I found easier fixing all the pins and then pick up this little cap in position
3:05 Had to go and check that the kids where still asleep…
Nice one!! Good luck with future videos!
How gentle from the seller to add some Haribo. So today some Haribo, a fixed PS5 and a happy Sally. Perfect.❤
Love your videos, Joey. I'm always interested in seeing what you've posted. I've thought about doing something similar, trying to fix broken eBay electronics and selling them but it's really luck of the draw. Happy to see that you're on a win streak. Appreciate the content, man. Good luck on future repairs and profits!
Nice fix! I'm sensing a theme here - for some reason, the HDMI ports always seem to fail! We never had this back when we had AV/Composite ports on old Playstation 2 consoles... 😛
I love the note. You are getting famous Joey😁.
Joey. On last PS5 find the TH-camr Uber Micro Repairs. Then find his video PS5 Not Reading Disks It's Not the Laser! I think youtube auto-moderated my comment. See if that resolves.
I actually like joining the hdmi pads even though the coating is still there. It's unnecessary but it's fun!
12:16 The pads are joined with a track, so no, there was no component fitted.
Hahaha gets Haribo but now I'm really curious about the mess inside xD are these hdmi encoders for the ps5 really expensive?
And Joey do you have videos were you work on controllers like Xbox One/series and PlayStation 4/5?
Nice job!
Just bought 5 broken ones for 400£. Wish I could be as lucky as this, and only be HDMI fault. We will see when I receive them🤞
You always do such clean work. What soldering iron would you recommend for someone just starting to learn? Thanks
Tidy bit of work, well done
There is a trace connecting them 2 pads near the hdmi so putting a component there would be pointless
Your sum up rounds it up so well these are so expensive to buy currently. I'm not really sure why either like usually we can be talking £100 between a broken one and working. I would say we are talking 50% fix rate so they just aren't worth fixing. If you get one like you did £150 and just the port then great but if it's the retimer then add £50, chances of it working after?
Not sure why they are going for so much on eBay most of them are launch consoles so they ain't going to last long till something else fails.
Love watching your videos takes some skill to do them pins with the iron, i know because I've tried it... I'm just using a £30 scope and a phone so pretty much all the pins look bridged 🤣.
I've used Google Images before when I haven't been sure if a component is missing or not
I've really struggled with bridges when i do a port. I've tried a 3mm tip but even with the iron on 400 it didn't put enough heat into the pins to solder properly and as soon as you press on the pin... A) pin bends = start again B) bottom of port melts = start again.
You need a large iron to get the solder to flow to dump enough heat but you cant get the tip in.. What seems to work for me is pre tin the board and port then drop it on hot. It ain't perfect but my scope isn't good enough and i get the shakes 😂.
I have the Hakko micro pencil for the 951 and the knife tip makes short work of jobs like this. It’s small enough where you can work each pin individually. You can touch it up an individual pin with 0.015 diameter solder. Give it a try!
Do you use 3rd party tips? Or have you gone with official ones?
interesting as always :)
Good stuff joey. Whoever did that port needs a PracticeStation 5 not a PlayStation 5 lol
Thanks mate :) Haha agreed!
Hopefully Sally's wallet gets fat enough some day that she can buy Joey a board heater (and then now the Hakko pencil, I guess), for even more better repairs
another nice fix Joey
Does the person plugging in the USB cable have parkinsons or something 🤣🤣 how to make scratches that bad haha
IN JOEY WE TRUST
hahah ,mansfield tech hub,, near me.
Awesome Sauce
T12-JL02 is the tip i use for doing HDMI port legs
What sort of temp is it set to?
@@buckhobbit I have my hakko set at 400
Nice content! What Kind of Flux do you use? Best regard and a good weekend
where is the new video?
its been 8 days Joey 🙈
9 days and counting 😢
Haribos!!!! You did well son
Are the traces in the bottom left at 7:02 supposed to look like that or are there 2 broken traces?
That looks like some dirt, dust or something. If you're reffering to bottom left of the chip
Everybody struggles soldering the hdmi port on a ps5 with a hakko. They don’t have enough power for this job and I won’t go into the issues with the tips. But point out that they aren’t that good to someone who bought one and they will not like it one bit. 😂
What would you recommend? I have a Hakko and the same issues joey did on that HDMI
Go Sally Go!
Anyway this was an extremely cheap console all things considered, I wish I had the same luck cuz I really want a PS5 lmao
Profit or flopit
Trust but Verify.
Joey do money
If the seller was a fan he definitely was in there stop lying its ok😂
You absolute egg 😂 wtf