Start button wouldn’t work and it was stuck in lock position, the Lo code lights up. Do you think it’s a worn out start button and needs control panel or something else to do with the lock?
A cheap MAH5500BWW control panel is easily found. But I couldn't locate a reasonably priced one for my MAH55FLBWW. They look the same but every resource I checked says they are not interchangeable. I just have a couple of load size buttons that don't work. Hmm... I wonder if the ribbon cable is dirty or loose?
@@ScottTheFixItGuyChannel my door switch is going out, where can I get the switch? And how do I change it? I've never worked on a washer or dryer in my entire life.
This video saved my house, we had a good working washer, and no one would fix it because they can't get parts. With this video we fixed it, and it works so well.
I looks like I have this very same washer my model is MAH6500AWW, my door will lock and everything lights up and sounds like it’s going to start but won’t and my door was locked for 4 days. I unplugged many times to reset but finally on 4th day I touched the delicate button and it unlocked, got my smelly clothes out and pressed start and it finished that cycle to get the small Amy of water out. Was able to get one more load washed and then it done the same thing. Mine is a 2004. I looked on eBay for console and couldn’t find one. I called the store when I purchased and he thought maybe it was mother board too. Special order on console for almost $300 from whirlpool and mother board $450. Do you have any ideas for me because my washer, microwave and vacuum all went out within one week 😩
![เขามัทรี - เอ็กซ์ ศุภกฤต - จอนนี่มิวสิค [ Official MV ]](http://i.ytimg.com/vi/AS9ufKuQIVs/mqdefault.jpg)
![PURPEECH - นี่ฉันเองคนที่... (It's me) [Official MV]](http://i.ytimg.com/vi/NuhHd0hOOg8/mqdefault.jpg)
Just took mine apart the grounds were loose and rusty i cleaned them. Its kinda working. Hope for the best
I hope it keeps working 😊
3:34 is there a video for the door switch repair?
Mine lights up but none of the buttons will change anything. The start/stop flashes but thats it. How do you put thies in diagnostic mode?
Did you ever figure it out?
Same. Just now. :(
@@diegoaaa888Did YOU ever figure it out?
Having the same problem please help
Start button wouldn’t work and it was stuck in lock position, the Lo code lights up. Do you think it’s a worn out start button and needs control panel or something else to do with the lock?
Any advice about no power at all?
hola mi lavadora no agarra el boton de encendido, solo se queda encendidas las luces del tablero
A cheap MAH5500BWW control panel is easily found. But I couldn't locate a reasonably priced one for my MAH55FLBWW. They look the same but every resource I checked says they are not interchangeable. I just have a couple of load size buttons that don't work. Hmm... I wonder if the ribbon cable is dirty or loose?
Good idea Larry
@@ScottTheFixItGuyChannel I forgot to tell you that I really appreciate your videos. Thank you
Thanks so much Larry
My washer just blinks on and doesn't do anything locks when loaded won open
My board is stuck on hot/cold, cotton/sturdy, machine runs, but I can’t change any of the settings. Do I need a new board?
Donde consigo el panel de encendido
By the way you have a beautiful Rolex watch 🤩
Thanks so much Terry it is a submariner and was a gift to me for 20 years as an instructor.
@@ScottTheFixItGuyChannel well it certainly didn’t go unnoticed, at least not by me.
How do you check door switch?
You can open up the top panel and use on a multi tester to check for continuity. Also, it has to click when you press in on the switch.
@@ScottTheFixItGuyChannel my door switch is going out, where can I get the switch? And how do I change it? I've never worked on a washer or dryer in my entire life.
Ugh, this fix didn’t work…might be time for a new washer
That laundry cup I want it it’s rare
mine can’t start and mine also can’t listen to any of the buttons and I can’t turn it off it just beeps at me
What model number was this dryer
WASHER model MAH5500BWW. (I cross-referenced the control panel part number)
We have a maytag neptune washing machine that won't start at all
Can you send that question to my email at: scottthefixitguy@yahoo.com
Mi problema la puerta no sierra
This video saved my house, we had a good working washer, and no one would fix it because they can't get parts. With this video we fixed it, and it works so well.
I looks like I have this very same washer my model is MAH6500AWW, my door will lock and everything lights up and sounds like it’s going to start but won’t and my door was locked for 4 days. I unplugged many times to reset but finally on 4th day I touched the delicate button and it unlocked, got my smelly clothes out and pressed start and it finished that cycle to get the small Amy of water out. Was able to get one more load washed and then it done the same thing. Mine is a 2004. I looked on eBay for console and couldn’t find one. I called the store when I purchased and he thought maybe it was mother board too. Special order on console for almost $300 from whirlpool and mother board $450. Do you have any ideas for me because my washer, microwave and vacuum all went out within one week 😩