Dude. That is slicker than camel snot..now all you need is some mini Mico wratchet straps to secure that load, your gonna get hammered when you cause a crash and your insurance rates go through the roof..
Awesome project! On your trailer servo, if you have room on the servo arm, move the actuator attachment point closer to the servo shaft and it will reduce the throw. I hope this helps.
Man pretty sweet! Not sure if you did this already sense this video is a few months old But I put a flysky FS-GT5 6 channel transmitter/receiver on my deadbolt so I could have 4 wheel steer, a channel to control the lighting, and a fpv camera that I can control the pan/ tilt on it. This 6 channel transmitter/receiver would be really sweet on this truck. Plus like the trailer adjustment you talked about you have a trim and sub trim plus a adjustable articulation rate on channel 5 and 6. Bets of all I pick this up on Amazon for under $100 well worth the cost
Very nice set up. I cut up 2 Big Country gooseneck trailers to build a 20.5 inch triple axle trailer. It’s detailed in Chevy Seafoam green and decked with scale diamond plate. It has 2 C-10’s and a MOFO off-road trailer sitting on it.
I’m building one myself using your STL files! Thank you for providing them! I love your work! I hope to be able to donate to you soon. (I’ve been running it for a few days without the body and I love it, hauling around 3 rigs on a gooseneck flat bed on with my TEKO kit from Furikek. Running 3s, didn’t glue the rear drives shaft together and it’s holding great!)
I did the same thing when it was just a low battery... I always kept it charged for using it in the house.. except once lol..was so sure bought a dang motor and didn't think of checking the battery til I went to install the barage..idk how you guys burnout the stock motor I have extra weight and beat the crap out of it outside just straining it up huge hills.. Mines over a year old and idk can't explain it should be ashes by now
Hey bro. I’m a big fan of your stuff and love the fact that you have the files online for everyone to print themselves . I’ll be posting up a video with the tracks I got from you off Etsy. Be on the lookout ! Thanks man. Congrats on the new job and keep pushin on! 💪
This is the best tow rig I've seen and even though I'm a ford guy and think chevy is a bit unreliable this is still cool and its just rc so it doesn't matter and if you get a chance or can it would be really cool if you made a tutorial on how to put the scx24 wheels onto the trailer because u have a couple sets of spares I wanted to mount onto mine coolest rig so far good work
Nice job on the rails. Looks about like the fms atlas next to a scx24. Probably not real noticeable until the C10 is beside it. Tractor supply and Orchelns carries that same brand and have a bunch of 1/20 and 1/32 farm trucks, utv, semis and tractors but not 1/24 scale which is very annoying. Lol we have it so bad in the US. Some one on the opposite side of the globe just had their house bombed and family killed but I'm bitching about scale toys. Nice work !!
Badass build sir!!! I have a 2012 GMC Sierra 3500HD and this is a must for me now! I know it's a prototype so to speak, but is everything I would need to modify a scx24 (excluding electronics) but including trailer skeleton available for sale?
Just made the awesome dually kit and rims. My only problem is that the tires in the back are so close to the suspension that they rub. In the video, it doesn't look like yours rough at all. Not even close. Are there any remedies? I can't move them out with spacers because there's not enough thread for it.
1:24 not 'wheelbase'... track width... amazing truck though, SWEET dove tail trailer EFFIN awsome build.... I might have to download these files and give it a try!
I am finishing up the product now! I will post a video soon with a build guide and the link for the parts! The body is the big country toys 1:20 scale chevy truck.
I send two extras with each kit. Also the pivot balls need to go in one side of the links as the opening is bigger. If you’re still having issues I can send you replacements free of charge.
@@christophercastilaw3157 Your printer e steps for the extruder motor or a slicer setting are likely off. You could also use a knife or something else to clearance them after printing if you don’t think that’s the case. The tolerances are tight so all settings must be dead on to get them to work. Thanks!
I like how white and yellow jeep traded spots on the corner before the rocks. Lol
This is super cool, would love to see a 3d printable set/full kit to extend it like that!
Parts are for sale on Etsy! Link is in the description!
I wish I knew how to create and 3d print stuff. I'm horrible at it.
Holly Cow! That thing is sick! Took your advice on the Goodyear and your were 100% right! Great job!
Glad I could help!
You should sell the trailer. Please I would buy no mater the cost and I think others would to.😊
I with my "authority" deem you king of the 24s! Very impressive builds!
Man that make a killer mini pulling truck with the scx24 monster tires
Dude. That is slicker than camel snot..now all you need is some mini Mico wratchet straps to secure that load, your gonna get hammered when you cause a crash and your insurance rates go through the roof..
Love this build! Appreciate all the work it must take to make this
You bet
Awesome project! On your trailer servo, if you have room on the servo arm, move the actuator attachment point closer to the servo shaft and it will reduce the throw. I hope this helps.
Man pretty sweet!
Not sure if you did this already sense this video is a few months old
But I put a flysky FS-GT5 6 channel transmitter/receiver on my deadbolt so I could have 4 wheel steer, a channel to control the lighting, and a fpv camera that I can control the pan/ tilt on it.
This 6 channel transmitter/receiver would be really sweet on this truck. Plus like the trailer adjustment you talked about you have a trim and sub trim plus a adjustable articulation rate on channel 5 and 6. Bets of all I pick this up on Amazon for under $100 well worth the cost
Ordered your kit and everything else to build one for myself today ! Can’t wait
You should sell a 3d print version of your trailer way better than the ones they sell !
Incredible work brother, I love how the 3500 came out 💯
Appreciate it!
Very nice set up. I cut up 2 Big Country gooseneck trailers to build a 20.5 inch triple axle trailer. It’s detailed in Chevy Seafoam green and decked with scale diamond plate. It has 2 C-10’s and a MOFO off-road trailer sitting on it.
Absolutely love the warthog!!!
That is so bad ass! Start making one for me to buy! I am a huge Chevy fan please!
Made a old man smile !
Me tooo! I have an etsy account ready to purchase these parts. Super keen to build 1. Legend design dude👍🤠👍
Excellent work on the truck and trailer.
Turned out great I'm building one now.
It’s funny I just seen the post on Facebook about this set up and now I come across the video lol
Wow.. absolutely fantastic.. Bravo!!
That is awesome. I’ve been wanting a 1/24 tow vehicle. I need to looks into buying the parts and doing this. Turned out so good. I love it.
I’m building one myself using your STL files! Thank you for providing them! I love your work! I hope to be able to donate to you soon. (I’ve been running it for a few days without the body and I love it, hauling around 3 rigs on a gooseneck flat bed on with my TEKO kit from Furikek. Running 3s, didn’t glue the rear drives shaft together and it’s holding great!)
Awesome, glad you are having a good experience with the prototype! Shoot some pics through on FB if you have a chance. Thanks.
This is awesome! Ive been working on my own super duty SCX24, but this looks a lot better than what I've managed to create
Is it the big country f-250 single rear?if so I’m trying to do that to and would like some advice if you don’t mind
I did the same thing when it was just a low battery... I always kept it charged for using it in the house.. except once lol..was so sure bought a dang motor and didn't think of checking the battery til I went to install the barage..idk how you guys burnout the stock motor I have extra weight and beat the crap out of it outside just straining it up huge hills.. Mines over a year old and idk can't explain it should be ashes by now
I love the duramax and the trailer. I want one.
Axial needs to pay attention to this channel 🔥 great work 👏
I’m doing it but with the dodge one :D
Looks awesome man great use of the servo ramp.
That's badass rig I want to build my own tow rig when I can get another scx24 scale truck
really enjoyed this video! Looking forward for more content!
Im trying to do the same. I got a body of a ertl 1/18 scale chevy 4 door truck. Made it a single cab and using a wpl chassis 4x4. Still working on it.
Hey bro. I’m a big fan of your stuff and love the fact that you have the files online for everyone to print themselves . I’ll be posting up a video with the tracks I got from you off Etsy. Be on the lookout ! Thanks man. Congrats on the new job and keep pushin on! 💪
Thank you!
Can you make a video on how to put together the dualy kit and trailer?
Wow that’s awesome dude, I’m a Chevy guy to. Appreciate you Sharing, super cool set up I’ll be watching more
Thank you!
This is the best tow rig I've seen and even though I'm a ford guy and think chevy is a bit unreliable this is still cool and its just rc so it doesn't matter and if you get a chance or can it would be really cool if you made a tutorial on how to put the scx24 wheels onto the trailer because u have a couple sets of spares I wanted to mount onto mine coolest rig so far good work
Thank you! They're just mounted straight with a 2mm bolt. No bearings or anything.
Also a ford fan this same company makes a 2011 ish flatbed ford that just feels off. Their chevy and dodge are much better models for some reason.
Nice job on the rails. Looks about like the fms atlas next to a scx24. Probably not real noticeable until the C10 is beside it. Tractor supply and Orchelns carries that same brand and have a bunch of 1/20 and 1/32 farm trucks, utv, semis and tractors but not 1/24 scale which is very annoying. Lol we have it so bad in the US. Some one on the opposite side of the globe just had their house bombed and family killed but I'm bitching about scale toys. Nice work !!
Badass build sir!!! I have a 2012 GMC Sierra 3500HD and this is a must for me now! I know it's a prototype so to speak, but is everything I would need to modify a scx24 (excluding electronics) but including trailer skeleton available for sale?
That would be awesome i hope he does sell this stuff as a kit to do it yourself
It is actually. you can download the files for the links and the frame extention as well as the dually wheels
@@CustomRcCanada just to bad I don't have a 3d printer
Can you try a chassis extension on for the trx4m to fit a big country truck?
I literally just bought a kit from you earlier tonight! 🤣
Planning to build one of these very soon! What all did you use for the light kit? I really like how you've got the button in the bed
What body is the white jeep on the back of the trailer it looks sick.
That Chevy is so nice! May i offer a idea, it needs this RCAWD370 i just put a 2430 motor in my SCX24. Its so beast
When will you have more tracks instock?
They are in stock now!
Great way to get to the trail head!
Any chance you could make a build video!?
this is so sick no idea why it doesn't come up when you search RC dually
no deep dive into the dually wheels - are they just one piece 3d printed?
That is dope nice ,I wish I had a 3d printer but awesome built
Looks great!! But pleeeese put a $5 servo slower on the tailgate. Then it would be EPIC!!
That is a great idea! Thank you, I may have to try that!
That’s my favorite rig I’ve scene
Thank you!
Can i purchase said “stretch kit”? I just finished the warthog i bought. Love it. Now I’m working with a new C10
This needs a install vid.
Is there something you put in the links to take away the slop
Are you going to be printing out more? I see there's only 4 left and I have to wait a couple weeks. And are the trailers available?
Just made the awesome dually kit and rims. My only problem is that the tires in the back are so close to the suspension that they rub. In the video, it doesn't look like yours rough at all. Not even close. Are there any remedies? I can't move them out with spacers because there's not enough thread for it.
Beautiful build.
duuuude.... ii wish i was at least half this good on my channel keep it up my dude !!!
That is sick nice job man
1:24 not 'wheelbase'... track width... amazing truck though, SWEET dove tail trailer EFFIN awsome build.... I might have to download these files and give it a try!
Wow awesome build .do you have a link to the Chevy truck and is your files available to build the dully and trailer? Thanks
Looks hella fun to drive
Ever put big enough tires on the left ones to drive upside down? Jw
I haven't yet, but have thought about it!
@@CineMoto24 just make it look good too when ya do! 🏆
That's awesome, need one now
This. Is. EPIC!
Wow. Just wow.
i see that fz 09 in the back.
Oh yeah, she’s a riot!
I saw you on the fb page . Great work bro . Will you sell the links?
Freakn awesome!!! Rock On 🤘🏻🤘🏻
Thanks!
Love it! I will have to try it!
You should!
Will you be doing the chassis stretch as a production kit?
Yes! It is for sale on my Etsy page now! My shop is closed until next week though as I am on Vacation.
I have the Big Country F250 super duty, would your kit fit that body
Recognized the deck on thumbnail from etsy lol
I think this is super cool are you thinking about making these 3d parts available in your shop when just have time?
where did myou get that body . that build looks alsome brother
Since the square body is such a popular platform why doesn't someone make a body of the crew cab dually
If you sell a kit for this on etsy I would totally buy it!
That is really cool, do you use the stock battery and charger?
You should put your dually wheels on the trailer.
Edit: But not the 2 sets I just ordered. Do you have a link for that light kit?
any links for the larger warthog at 45 secs? the green one please?
Man that is awesome work 🔥👍
Thanks 🔥
The Duramax is sweet! I know you have the file for the dually wheels but what do you use for hubs mount the rear wheels?
Thank you! I am not sure what you mean by this question. The 3d printed wheels mount just as any other SCX24 wheel would mount on the hex.
@@CineMoto24 what do you use to mount the outer wheel to the inside wheel? Is there an adapter or are the wheels 3d printed as 1 piece? Thanks
Are the chassis stretching parts gonna be available on your Etsy soon? I hope so and I’m sure I’m not the only person interested. Thanks
Where did you source the 2x6x3mm bearings for the tracks and for how much? This size is unusually expensive for bearings
Sick build!
How did you get those tank tracs on the jeep
They are for sale on my Etsy page! I designed and 3d printed them!
how do i order tracks? i need. awesome new truck!🤘
Thank you! You can get them on my Etsy shop once they are back in stock! I am currently awaiting bearings from my supplier.
What body did you use, I'd love to turn my scx24 into one of these
It’s the big country toys duramax body
So rad!
Just curious, where do you get the parts to print on a 3D printer
I design them all myself!
Hey what shocks do u have on the truck
Siiiiick!!!
What tracks did you use on the yellow jeep?
what axle shafts are you running for your dually conversion?
Awesome 👏🏼
Do you sell a kit to make my Scx24 a long bed dually? If so how much and do you have a link to the body?
I am finishing up the product now! I will post a video soon with a build guide and the link for the parts! The body is the big country toys 1:20 scale chevy truck.
@@CineMoto24 hell yea thanks!
So cool!
What ball ends did you use for the links? I tired using the stick ball ends and it broke the link. Lol
I send two extras with each kit. Also the pivot balls need to go in one side of the links as the opening is bigger. If you’re still having issues I can send you replacements free of charge.
@@CineMoto24 well I downloaded the file to print em off. And the ball end don’t fit at all. lol.
@@christophercastilaw3157 Your printer e steps for the extruder motor or a slicer setting are likely off. You could also use a knife or something else to clearance them after printing if you don’t think that’s the case. The tolerances are tight so all settings must be dead on to get them to work. Thanks!
@@CineMoto24 sounds good. Thanks man!
Very nice 👍
Very cool
Do you sell the kit on your Etsy? Interested in purchasing if you do
Whoa 🤯. 👏🏾