Hello Mikko... welcome back and greetings from Peru !!! ... we were waiting for another of your great videos. This one was extraordinary. I hope some day I have at least the half of your skills for doing my homemade lures... I haven't started to do my resin lures yet. I'm still working with Balsa wood. I have to break the ice and try to do something with the resins and polymers I bought. Mikko, congratulations for your work and thank you for sharing your skills and knowledge... You help me to learn a lot!!!
Obomodulan. Never heard of it. Usually when I have chip out on bass or poplar, I patch with super glue and baking soda, but I like what I'm seeing there. Will have to try it. Either that, or stick me a frozen blue gill in some silicone.
Great lures! I made a vacume degassing pot made from and old pressure cooker and an old HVAC roughing vacume pump I got at a flea market for $10 to take the bubbles out of both the mold material and the casting material - eliminates all bubbles. I also occasionally put a vent hole on the mold for tricky designs where flow through can be a problem. Beautiful lures! What no giant Musky following the lure yet??
i should gobble together somesort of degassing system too the bobbles can make stuff rather annoying especially when casting for lures. i wish there was a giant musky following the lure but sadly we dont have them in Finland
@@SolarfallBaits awesome baits by the way. Ive starting making stickbaits here in new Zealand to chase kingfish. I am now addicted to making lures haha
@@SolarfallBaits oh, that’s great. I looked it up, it seems hard to get a hold of in Ontario. I guess it can only be ordered. Too bad, because the shipping ruins so many things.
That solely depends on the size of the lure i measure the amount in grams in relation to the resin so its hard to say an exact amount. As a ratio but its mostly between 4-8grams of micro balloons.
WOW!!! VERY IMPRESSIVE WORK!!! Just subscribed. Wish you would shoot some under-water footage to get a better shot of this ( and other ) lures in action.
very skilled work. i dont even know how you make the fish the same on each side.... in 3d its simple iwork on half the model it make it automatically on the other side.. but trying to carve i dont know seems so hard and then each time i try to adjust it make other side off... i almost want to buy a 3d printer design my lure in 3d print it then make my mold from the 3d printed lure.. would be a lot easier for me like that but those printers are still loud and not fast enough for me to really go out and get one yet.
Wonderful baits you make. Almost too beautiful to use... I'm also trying to make my own jerkbaits. I'm pleased with my wood-working skills, but the painting is a disaster. I have a cheap airbrush pencil with a .25 nozzle and a borrowed compressor and I'm using the jvr paint. Is the nozzle too small?? It's impossible to give a lure a covering white paint, although the use of opaque paint. Do you have a video explaining the airbrush requirements?? What is the minimal ....
Thanks for your answer!! I have no idea about the psi?! This is the small compressor I use for the moment. thumbs.worthpoint.com/zoom/images2/360/0515/11/brevettato-airbrush-compressor-made_360_d282656a40a8b26c0779e4dd1e6fdc73.jpg Looks like this small machine can't produce enough psi to work properly?? I don't find technical details on the internet. The type or brand is 'Brevettato'.
Amazing work. It would be even better with footage of you catching a fish on that lure. Also, a polarised lens on your camera or even an underwater camera could give much better images of your tests at the end of each video.
So I have a question about the resin :) , also I really like you're videos, you're true insparation :) I Started making lures myself I bought the formcast buro , but the resin type I bought is sinking very fast ,without any weights, the resin you're using is floating...Can you tell where is my mistake , or i'm not using the right resin :) :) Thank you very much ,if you reply :)
you have to add micro balloons or filler as its also known for to the mix to make it boyant. stuff like feather lite as already micro balloons added to it when you buy it.
never had any fish hooking problems with 3/0 hooks (like i have on the lure in the video) for pike. Also usually bigger and heavier hooks you use on a glide bait such as this, that might have a negative effect on the gliding action of the lure. Imagine that the weighting system inside the lure is a fixed pendulum that makes the lure move from side to side. Basically the more stuff you add to off set that pendulum motion, the harder you usually need to work the lure too with donward strokes or reel turns.
Me being from northern europe i was aiming for the common bream thats native to that region. There are some sea species that i know that some people call bream where their at.
Okay I like your videos but what I want to know is do you actually catch any fish on your lures? So far I have seen you cast them but not catch anything.
@@KillItandGrillIt in these older videos i never added any fishing footage mostly because when i'm fishing i just want to fish and not worry about if im running out of battery or did i remember to press record etc.
Hello Mikko... welcome back and greetings from Peru !!! ... we were waiting for another of your great videos. This one was extraordinary. I hope some day I have at least the half of your skills for doing my homemade lures... I haven't started to do my resin lures yet. I'm still working with Balsa wood. I have to break the ice and try to do something with the resins and polymers I bought. Mikko, congratulations for your work and thank you for sharing your skills and knowledge... You help me to learn a lot!!!
What an absolutely exquisite lure that is. A total work of art. Superb yet again mate
very impressive lure and art. it's extremely satisfying to watch your work progress
Very impressed with your work. I’m inspired to try make some lures again. Thank you. 👍
I really enjoy your videos. The passion that you have for making them come through in your videos. Thank you 😎🎣🚤🐟🐟🐟🐟🐟
It's so impressive how you make these lures, the details in making them are you realistic great work
thanks for the kind words, i just try my best ;)
That's freaking awesome work, pike and muskie should love those
Obomodulan. Never heard of it. Usually when I have chip out on bass or poplar, I patch with super glue and baking soda, but I like what I'm seeing there. Will have to try it. Either that, or stick me a frozen blue gill in some silicone.
This is just crazy man😲 You've got some realy amazing skills, I give you that. Great job!👍
Great lures! I made a vacume degassing pot made from and old pressure cooker and an old HVAC roughing vacume pump I got at a flea market for $10 to take the bubbles out of both the mold material and the casting material - eliminates all bubbles. I also occasionally put a vent hole on the mold for tricky designs where flow through can be a problem. Beautiful lures! What no giant Musky following the lure yet??
i should gobble together somesort of degassing system too the bobbles can make stuff rather annoying especially when casting for lures. i wish there was a giant musky following the lure but sadly we dont have them in Finland
This is amaizing way to make lure for big pike and catfish....bravo guy.....very very nice work.....
the amount of effort and patience you put into making these lures is amazing. love watching these ^-^
Amazing!!! What a descent craft!!! Love it.
Would love to paint one of your lures (not that your doing a bad job). Awesome skillz as always 👊🖒
Nice work as always! I always learn something new watching your vids.
Love this lure and it's action. Can you supply the length and weight, please. Looks like a great lure for big large mouth bass.
these ones are 17cm/6.7" and weight 115g/4oz
Beautiful as always Mikko! Very impressive!
That was fantastic and it walks great too!
Ouaw! Magnifique! Aurai tu un fichier PDF pour le master? Stp
Nice work mate. I feel a lot better now know my airbrush isn't the only one covered in paint !!
Amazing video so much attention to detail you are a perfectionist sir :)
Thanks for checking out the video Mark
First cast , snagged
Lmao
Excellent piece of work!!!
enjoyed it Mikko - beautiful work brother
jedi master for lures
You and marlin baits should have a lure off. I bet it produce some sick lures
not a bad idea
@@SolarfallBaits awesome baits by the way. Ive starting making stickbaits here in new Zealand to chase kingfish. I am now addicted to making lures haha
@solarbait hi man !
Where did you buy that obomodulan stuff ? Can't find a shop that have it !
Awesome work ! You are inspirations !
It was gifted to me i dont know where you can buy it
@@SolarfallBaits thanks mate !
Would you continue using Obomodulan in the future? It seems very hard to carve.
It's not hard to carve at all and infact I prefer harder woods than this material to carve my mold maters.
@@SolarfallBaits oh, that’s great. I looked it up, it seems hard to get a hold of in Ontario. I guess it can only be ordered. Too bad, because the shipping ruins so many things.
You should do a giveaway of some of the materials you use to help people make there own lures!
Absolutely love your channel mate, could you tell me what ratio of micro balloons you use for your glide/jerkbaits please?
That solely depends on the size of the lure i measure the amount in grams in relation to the resin so its hard to say an exact amount. As a ratio but its mostly between 4-8grams of micro balloons.
Здравствуйте.Скажите, какой материал использовали для данного джеркбейта?
WOW!!! VERY IMPRESSIVE WORK!!! Just subscribed. Wish you would shoot some under-water footage to get a better shot of this ( and other ) lures in action.
Amazing as always! Hail hydra ✊🏽✊🏽
very skilled work. i dont even know how you make the fish the same on each side.... in 3d its simple iwork on half the model it make it automatically on the other side.. but trying to carve i dont know seems so hard and then each time i try to adjust it make other side off... i almost want to buy a 3d printer design my lure in 3d print it then make my mold from the 3d printed lure.. would be a lot easier for me like that but those printers are still loud and not fast enough for me to really go out and get one yet.
jdogg661420 its not really that hard, you just need to be consistent and patient
Nicely put together video, very inspiring
Wonderful baits you make. Almost too beautiful to use...
I'm also trying to make my own jerkbaits. I'm pleased with my wood-working skills, but the painting is a disaster.
I have a cheap airbrush pencil with a .25 nozzle and a borrowed compressor and I'm using the jvr paint.
Is the nozzle too small?? It's impossible to give a lure a covering white paint, although the use of opaque paint.
Do you have a video explaining the airbrush requirements?? What is the minimal ....
what sort of psi does your compressor do? that can make a big difference in your painting
Thanks for your answer!!
I have no idea about the psi?! This is the small compressor I use for the moment.
thumbs.worthpoint.com/zoom/images2/360/0515/11/brevettato-airbrush-compressor-made_360_d282656a40a8b26c0779e4dd1e6fdc73.jpg
Looks like this small machine can't produce enough psi to work properly??
I don't find technical details on the internet. The type or brand is 'Brevettato'.
i have no clue, but it does look very puny to me so i dont think it's very powerful.
Hoi, is this compressor a good one to start with: www.alphametal.be/nl/shop/product/31570-hbm-as-48-a-airbrush-compressor
that one looks okey to me, altough its a bit loud
Amazing work. It would be even better with footage of you catching a fish on that lure. Also, a polarised lens on your camera or even an underwater camera could give much better images of your tests at the end of each video.
masterpiece of art
I'm making an assumption that a majority of people use balsa wood for their lures, but what about poplar wood?
poplar is a good lure wood, especially for traditional wobblers and such
SolarBaits thanks! 👍☺
SolarBaits I really enjoy watching your videos. Very soon i will be making my own wooden fishing lures, thanks for your insight and tips!
Mercenary_ 32 - Bass prefer Basswood.
I use cedar, but also willow and ash.
Hello, with what wood did you make this lure , Nice job .You have one more subscriber (FRANCE)
I didnt use wood, i'm pretty sure i mention that in the video, also i have a material list in the video description.
Nice job mate! Those lures look mint. Would work really good for big barra here is Australia. Cheers 👍
So I have a question about the resin :) , also I really like you're videos, you're true insparation :)
I Started making lures myself I bought the formcast buro , but the resin type I bought is sinking very fast ,without any weights, the resin you're using is floating...Can you tell where is my mistake , or i'm not using the right resin :) :)
Thank you very much ,if you reply :)
you have to add micro balloons or filler as its also known for to the mix to make it boyant. stuff like feather lite as already micro balloons added to it when you buy it.
Thank you a lot dude, thank you very much :)
Hi, I have couple questions.
Which wood are you using?
And which material Are you using on eyes? Please
the full material list is in the video description, also i have a seperate video on my channel on how i make my eyes
@@SolarfallBaits Ou, okey, thanks you
Very impressive lure, that will work great, but I think the hooks are way, way too small.
never had any fish hooking problems with 3/0 hooks (like i have on the lure in the video) for pike. Also usually bigger and heavier hooks you use on a glide bait such as this, that might have a negative effect on the gliding action of the lure. Imagine that the weighting system inside the lure is a fixed pendulum that makes the lure move from side to side. Basically the more stuff you add to off set that pendulum motion, the harder you usually need to work the lure too with donward strokes or reel turns.
You should make videos fishing with these lures too. I'd watch.
will you be making a video on how you finish with the clear coat ?
Rudy Rodriguez i already have an older video on my channel about that
Super work Mikko!!
i can't find where to buy Obomodulan :( looks so good
You can do exactly and even finer details with wood, so dont feel bad about not finding it. As far as i can recall its only sold to companies.
amazing work of art! LunkersTV old intro musing at 13:14 lol
is you use hese lures, can you please at the end of each luremaking video show you catching a fish on the lure?
perhaps in the future. but honestly i don't even bother taking my action camera with me when i go fishing.
well noted, i just think it would be a good addition to authenticate your lures
I'm already pissed enough when I snag a lure and lose it... I can only imagine what you must feel like!
3dSorcery I think I'd have to either jump in to retrieve it or murder something lol
Mikko, can you tell me the type of resin you use for the lure body? Not the brand, the type of resin, please
In this one used smooth on feather lite
@@SolarfallBaits I ment how the chemichal products name is... I dont know if I make myself clear
@markosboy82 it's also known as urethane casting resin.
@@SolarfallBaits Thanks!!!
this material you use for the body doesn't destroy from fish teeths? or from the power from the big fish?
it does not when you use clear coat
SolarBaits OK thank you very much keep doing nice videos like this!!
Just found your channel your lure making skills are amazing, if I made one it would have to be based on a leather carp lol.
thank you fantastic work x
what is the link to your video on how to make the weight system? I tried to look and I couldn't find it. Thanks in advance! Tight Lines.
its in the video description box like i mention the very beginning of the video
Nice one. Like usual. In another video you mentioned the file you use for the fins. I can't seem to find it. So what file do you use? :)
Glenn Goovaerts mine is a no name brand. Its a round file that tapers towards the tip.
I have the same one but the tip is so fine
Hello I would like to know what is materials which you use to make your Master's degree? Thank you un advance
i say it in the video many times and also the material list is in the video description box
SolarBaits Thank you very much for this fast answer
Bonjour, en quelle matière es fait le master. Désolé pour mon anglais
Hello, in what subject are the master. sorry for my English
All of the materials are listed in the video description
Love that knife. Where did you get it?
Obomodulan synthetic cant find anything on google. any specific links someone could share to find this stuff.
beautiful, but not the Bream I'm used to,.lol apparently Bream is a misnomer when applied to bluegill and sunfish in the southern United States.
Me being from northern europe i was aiming for the common bream thats native to that region. There are some sea species that i know that some people call bream where their at.
that is frigging awesome
Hey bro you and nate marling need to do a video together that be awesome
Hail Hydra
awesome lure
Что вы заливаете в форму? Спасибо
perfectly perfect
Hi. What materials do you use?
А вы случайно не русскоговорящих?
Check the video description
tried to get to the leading video and it doesnt load
I want to know how you done the fin
Well i do show it in the video.
Amazing artist
i tried to make just a simple lipless crank and its lopsided lol.
What type of wood do you use for carving the master?
In this video the master is not made from wood but from synthetic material called obomodulan, if i do end up using wood how ever, it's usually maple
Send me one of those man in that gold color would love to try that thing in my home waters
can you share the template you have on 4:20 ? would greatly appreciate it.
but i live in asia there is no such thing as mapel wood or obomodulan material
was that the feather lite that was used to make the blanks?
its casting resin
does sikablock also work? i think its less expensive than obomodulan right?
i am not familliar with that material so i cant really say
how many hours time put into this lure ? pls
What material do you use to make the cast
the full material list is in the video disgription
whast about pine wood? is it good for any lure making?
JIG FISHING it's pretty soft wood and you can certainly use that too, but I personally prefer hardwoods myself
hello !!!! or buy your product plz ????
How do I buy it from you and how much? Thx
what kind of resin do you use?
and i gues it's floating right?
I have the full material list in the video description
SolarBaits sorry i didn't saw it XD
Thank you
Subscribed! Nice work!
12:16
Amazing! Congrats Bro!
Hello
WHAT PRODUCT DO YOU USE TO SCULPTE?
i say it in the video and its also show in the description bar under the video.
what kind of wood that you carve?
its not wood, i have all of the materials in the video description like i mention in the very beginning of the video
Nice!
Okay I like your videos but what I want to know is do you actually catch any fish on your lures? So far I have seen you cast them but not catch anything.
You might want to try newer videos where i do exactly that.
@@SolarfallBaits I will look I am eager to see you catch a fish.;
@@KillItandGrillIt in these older videos i never added any fishing footage mostly because when i'm fishing i just want to fish and not worry about if im running out of battery or did i remember to press record etc.
@@SolarfallBaits I can completely understand that. I do the same thing when I'm fishing.
Do you sell your baits?
Yeah i do sometimes
Amazing
Hi mate,are you sale them molds when make?
I don't sell any molds
hi Frend! you make bait sales?
Sometimes yeah. I usually announce such things on my Instagram page.
Hello. What wood you use?
i mention in the video itself and also in the video description that i used a synthetic mold master material called OBOmodulan
@@SolarfallBaits bat fest model you worki on Wood
what is the cost of obo board?
no clue i did not buy mine, it was given to me. google is your friend here
those things are rare in here
Wauw it’s so amazing