WLED Sync Explained
ฝัง
- เผยแพร่เมื่อ 16 ธ.ค. 2022
- In this video, Chris explains how to synchronize colors, effects, and segments between multiple WLED controllers. He also shows how to use the JSON API to synchronize using presets.
LINKS TO PRODUCTS SHOWN:
RGB Fairy Lights - handydad.tv/rgbf
Node MCU controller - handydad.tv/nmcu
5V power supply - handydad.tv/1vcb
New to WLED? Learn more here: • WLED for $3.26!!
☕️☕️☕️ If you liked this video, say thanks with a cup of coffee 👉🏻 ko-fi.com/handydadtv ☕️☕️☕️
✔︎Follow me on Facebook, Instagram and Twitter @HandyDadTV - แนวปฏิบัติและการใช้ชีวิต
Thanks for this. I just figured this out yesterday, and so it was fun to follow along and validate my thoughts on how it works. I used the HTTP API so I could create a Siri Shortcut in my HomeKit automation so I could change the presets. I'll have to play around with the JSON more.
Awesome! Glad it was helpful 👍🏻
Awesome. I couldn't figure out why two strips I had in different rooms were synced. Now I can use them again without frustration! Thank you!
Glad it was helpful 👍🏻
Thank you for taking the time to share this helpful information. Much appreciated!
My pleasure!
Great Video!! Thanks for detailed explanation
Glad it was helpful 👍🏻
Thanks man ... perfect timing ... I have two strings of fairy lights I just setup on an ESP32 just like you have there! I dabbled and found out I THOUGHT how to sync - but it wasn't working quite right. It was more an issue of waiting - didn't seem to kick in right away. Great video I probably will play with using the JSON calls in my home automation later. Subscribed.
Thanks for subscribing! Welcome to the family!
That was brilliant! Thanks 🙏🏼
Glad you enjoyed it!
What a great video! Thanks!
Thanks 😊
Badass thanks! Can you run directional effects setup as a segments. Tough to wrap my mind around If they would just repeat themselves.
All effects are directional, but they can be easily be reversed. And they all repeat continuously.
Not sure if that answers your question.
Great explanation of 'Sync' which is a very tricky and poorly documented topic of wled. 😄
Thanks so much 😊
Hello. Great video. I have been watching a lot of WLED videos and am thinking of jumping in. My reluctance is the software. It seems complicated. How difficult is learning curve? Thanks.
If you buy a Dig-Uno or Athom controller that already has WLED installed, there’s no software required at all. Just power it up and connect to WiFi. Really as easy as it gets.
@@handydadtv thanks for the reply. I was referring to how difficult it is to set the lights up in the software. Segments, syncing, stuff like that. Thank you.
Oh gotcha.
Nice video. Is there a maximum number of node that can be sync ?
I don’t think there’s a limit.
@@handydadtv tks for the quick reply. I have also ask the question into WLED forum.
Nice video . I like . Can you test or do you know how to have 2 controllers and each controller to start a Effect when a pir it is connected to controller ? and somehow to cane do (do not consider the motion sensor from 22:00 to 24:00) to use a Effect starting from first controller and continue to second controller (for example to make a chasing effect from first led of first controller and end to the last led of last controller) . It is possible this ?
It’s possible with Home Assistant.
@@handydadtv. I know with Home Assistant We can do more.
But, I do not have Home Assistant and it is not poroase to buy for this.
I need to do nativ from the wled not other soft/device...
Cane you test and see If it is posible?
No. Sorry.
@@handydadtv tnx for the info and recomandation
Extra : Can I add a zigbee sensor to input of a dig uno or dig quad?
So if you press the preset on one wled screen or one controller it will do the same on the other controller? A little confusing.
Yes, the receiver will mirror the colors and effect of the sender. And optionally the segments too.
Hey could you give an explanation of master and slave over ethernet connection, i have the DIG QUAD x2 and trying to use them to light up a sound system thankyou!
I have no experience personally. So I suggest asking this question on Reddit /r/wled.
@@handydadtv thank you sir!
Do you or will you do a power injection video?
I don’t but here’s a good one th-cam.com/video/apwQ5Jh4VyE/w-d-xo.html
I am still having issues with my lights syncing segments - the controller sending the sync signal has 3 segments set up, but the controller receiving the sync only syncs the color of the 2nd segment with the spacing of the 1st segment. No idea. I have segments and bounds checked on both controllers. Any thoughts?
You’ll find more knowledge on Reddit /r/wled than here. Sorry.
Is there a way to sync them with no delay? When you want to sync a blinking effect it’s not synchronous:(
When you sync effects, it should sync the speed and intensity attributes with it. So, in theory, they should be in sync initially. But I’m sure it’s possible that they might drift a bit over time.
Is that what you’re seeing?
I need to start messing with WLED
It’s addictive
Does this work with audio reactive?
I don’t know. Maybe ask on Reddit.com/r/wled.
How many esp's can be synced/controlled at once? Ta
I don’t know of any limit.
@@handydadtv how many leds can the module power when using the USB port without any external power injection Thank you.
@meguinness1116 Voltage drop depends on the length and wattage of your strings. You need to do some math. Rule of thumb is to inject power every 150 pixels with 5 volts and 300 pixels with 12 volts.
@@handydadtv thank you, I need to run less then 30 probably...so should be ok without injection.
i'm even more confused, and i cant sync 2 stripes one with 100leds and other with 121... this is just to difficult :D holy moly
Did I say they needed to be the same size?
👍🏻
Thx for a great video. I currently run two synced controllers and was wondering if the receive can have a certain effect set but have the send controller send color changes?
Possibly. I didn’t play with all the checkboxes.