How to Install Electronics on Tamiya TT-02 Type SR Chassis Kit
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2024
- In Part 10 of this Tamiya RC series, I install the servo saver, test and install the electronics including the receiver, servo and ESC. #tamiya #tt02 #tamiyarc
4V Cordless Electric Screwdriver Kit, USB Rechargeable Lithium ion Battery, LED Work Light, 32 pieces Screwdriver Bits, 8 Sockets, Flex Hex Shaft, Bit Holders and Storage box, Populo Power Screwdriver
amzn.to/3hGnQPd
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting RC's RC Cars so I can continue to provide you RC Car content!
Find me on Instagram: / rcsrccars
Check out my Facebook Page: / rcs-rc-cars-1037696347...
Follow me on Twitter: / rcsrccars
Planned Video Sequence
Part 1 - Unboxing, Club Racing, TCS
Part 2 - Drive Shaft, Spur Gear
Part 3 - Front Diff, Rear Diff
Part 4 - Motor & Pinion Gear
Part 5 - Lower Suspension Arms & Front Damper Stay
Part 6 - Front Axles
Part 7 - Rear Damper Stay, Rear Axles
Part 8 - Dampers
Part 9 - Steering Assembly
Part 10 - Test Electronics, Install Servo, ESC, Motor
Part 11 - Wheels, Body Posts, Bumper
Part 12 - Masking & Painting the Body
Part 13 - Setup
Part 14 - Test Run
Part 15 - Track Practice
If you use the motor shroud you can mount the one-off switch..It screws to it..You can also take the shroud lid off and a motor fan fits right in it's place.
Thanks for tip bud. I’m following the manual step-by-step for this series. I’ll be getting the recommend hop-ups near the end and do a follow up video later.
Thanks for the great explanation
10:50 I use long nose plier to pry spread springs and place them into horn
Did you solve the gearing issue? I think the motor mount is not compatible with 28 tooth gear. And when you continue counting holes after 25 you actually are making it tighter. I would put 25 or smaller gear for the test. Might be wrong though.
You are correct. I used the same motor mount on the TT-02RR build using a 29T pinion gear. However, the spur was 64T. I didn't realize the issue until this episode during testing. I will make a follow-up video to address that. I should have used a 22T pinion but all I had was the 28T. Thanks for catching it. Thanks for watching my videos.
@@RCsRCCars my pleasure. I am waiting for my tt02sr. The shop hasn't ship it still though. I am fairly new to the RC hobby. Have traxxas 1/16 e-revo, and now the tamiya looks a little flimsy with these plastic gears and diffs. No idea how durably it will be. I ordered 4600kV motor for it and hope will not strip the gears too quickly. :-)
Where did you get the key for building the steering linkage/turn buckle? My thumb hurt a lot every time I build a kit. thanks!
I got that inside a 3Racing kit. Look for ball cup drive on Amain for something similar.
Hey i was wondering do you have name for every piece ur using to run tto2 rc chassis have u a link or anything im newb and gettin first rc kits that need to be built thats exactly the same as these TTO2 CAN U HELP IN AMAZON LINKS
Where did you get the servo? Did it come with the car or did you buy seperate
I bought this servo on Amazon.
really helpful. can you please tell me where you can buy the battery online?
Thanks for the video. It was very helpful. Can the extra/orange wire coming from the esc be cut off?
Yes you can cut it off but you should save it in case you want to upgrade to a brushless motor.
Excellent, extremely helpful and very detailed a Vids, - found all of this series useful :) Thank You.
I am new to this part of RC. I do have one question. What happened to the test run /prractice vids? Just curious, Thank you
Hey how was this servo for you ??
Hey nice videos, real thorough and detailed. Just wondering what is the difference between the tt02 RR and the tt02 SR .... as of now I have a spare tt02 stock with the red chassis and I’m trying to get the Yeah Racing Aluminium conversion kit and get some of the hop up pieces from either the SR or RR...what do you think?
This is my own opinion based on building and driving both the SR and RR. RR for speed runs, SR for track racing. The SR is easier to tune and add hop-ups like anti-roll bars. If I could only buy one, I would buy the SR. Ironically I sold the SR and kept the RR. I wish I did the other way around.
Great Vid. What kind of power screwdriver are u using. Whats the model name and brand?
I'm using a TACKLIFE screwdriver from Amazon but it appears their products are no longer available.
I have my eye on a POPULO 4V one as a replacement if this one ever breaks. I put a link in the description.
@@RCsRCCars cool! I actually just got a Pro Stormer off amazon for only $15! It half price. probably coming ut with a new model. Anyway its excellent! Id consider it especilly for 15! Thanks
Awesome buy!
@@RCsRCCars thanks! 1 week in of everyday use on my XV-01 Lancia build and no issues!