the cutlass blade tips come in a box not Shure how many are in the box I believe enough for 3 full blade changes so you never have any don't time only takes seconds to change them there awesome by the way love the lift in your garage think I'm going to look into a neumatic lift table along with the 750 lb mower jack from harbor frieght
"A lot of people put grease zerks in the housing..." Smart people put zerks in the housing; unless you like changing bearings every 2 years. Blue loctite on the collar screw threads too.
they did a test with the cutlass blades on a great Dane stander to a steel rod in the ground and it didn't even screw the mower up at all a real money saver can't wait till mine get here but here in good old buffalo ny snow will be here before we know it also if you want something else that will blow your mind on TH-cam type in blizzard of 77
No, just have to remove the mower blade bolt from underneath, then the rest comes out the top, pulley side. I removed the entire housing because I was servicing the entire deck.
Hello, we are an Amazon seller, and we are selling the spindle bearings used in your video, can you put our Amazon link in the introduction of your video? We will reward you accordingly.
yes i agree 100% typically i have my wireless mic but it is out of service. i tried to blend the narration but there are highs and lows which are frustrating when i am trying to put out a good product. makes me want to pull the vid down and reedit until i am happy with it. I appreciate your input!!! thanks!
I noticed that from the deck bearings. However everything else has been operating good and my Wife cuts the grass and she is not gentle on it. I’ve had to pull her out of the swamp a few times because she wanted to cut a path😂
The bearings could have been a bit better quality, but my wife cuts our grass and she doesn't get off the mower to move stuff. I have heard plenty of times when it wasn't grass the blades were hitting. I still believe this mower is a dang good buy for the price point and am super happy so far.
@@whatsnextgarage ... I know,i have one, my bearings lasted 400 hours, mine is 2008 , 60 inch, ill rebuild it this winter, just parked it and went bought a Kubota Diesel ZT, i hope i get better service out of it, but was expensive
Well, done video and very informative
thank you!! Have a great weekend!
No, you dont want a press fit. Thats the whole point of how those spindles work. Theyre user serviceable.
the cutlass blade tips come in a box not Shure how many are in the box I believe enough for 3 full blade changes so you never have any don't time only takes seconds to change them there awesome by the way love the lift in your garage think I'm going to look into a neumatic lift table along with the 750 lb mower jack from harbor frieght
Is this the same process for doing a rogue to? Mine has vibration and is tearing up belts and found out the collar was eating into the pulley
I think all the spindle assemblies are the same.
Thanks for the video!
You’re welcome hope it helped!! Have a great weekend!
"A lot of people put grease zerks in the housing..." Smart people put zerks in the housing; unless you like changing bearings every 2 years. Blue loctite on the collar screw threads too.
they did a test with the cutlass blades on a great Dane stander to a steel rod in the ground and it didn't even screw the mower up at all a real money saver can't wait till mine get here but here in good old buffalo ny snow will be here before we know it also if you want something else that will blow your mind on TH-cam type in blizzard of 77
Do you have to remove the housing to replace the spindle bearings?
No, just have to remove the mower blade bolt from underneath, then the rest comes out the top, pulley side. I removed the entire housing because I was servicing the entire deck.
Just opened mine and the pulley bolt with washer was LOOOSE! Thank God I opened it up. Lame boy mowers. Hence the name "boy"
Hello, we are an Amazon seller, and we are selling the spindle bearings used in your video, can you put our Amazon link in the introduction of your video? We will reward you accordingly.
Hello, we are Amazon seller, we are launching this spindle bearing, can you cooperate?
Please don't play music while you are narrating. At that point it's just noise and makes hearing your explanation difficult. Good stuff otherwise.
yes i agree 100% typically i have my wireless mic but it is out of service. i tried to blend the narration but there are highs and lows which are frustrating when i am trying to put out a good product. makes me want to pull the vid down and reedit until i am happy with it. I appreciate your input!!! thanks!
Bad Boy quality control is terrible. So is their engineering Very sloppy workmanship on their part.
I noticed that from the deck bearings. However everything else has been operating good and my Wife cuts the grass and she is not gentle on it. I’ve had to pull her out of the swamp a few times because she wanted to cut a path😂
Bearings wore out at 200 hours? what a piece of junk
The bearings could have been a bit better quality, but my wife cuts our grass and she doesn't get off the mower to move stuff. I have heard plenty of times when it wasn't grass the blades were hitting. I still believe this mower is a dang good buy for the price point and am super happy so far.
@@whatsnextgarage ... I know,i have one, my bearings lasted 400 hours, mine is 2008 , 60 inch, ill rebuild it this winter, just parked it and went bought a Kubota Diesel ZT, i hope i get better service out of it, but was expensive
@@cabbyhubby DANG that machine has to be a beast!!! and I bet they aren't giving them away! LOL
@@whatsnextgarage ....I bought it used 2017, 200 hours, garage kept, all service had been done by dealership $5000, its a 48" deck though
@@cabbyhubby take a little bit longer to mow but its a diesel Kubota!! cant go wrong with that!