How To Replace Parking Signal Light 05-07 Jeep Liberty
ฝัง
- เผยแพร่เมื่อ 1 ม.ค. 2014
- Buy Now!
New Corner Light from 1AAuto.com 1aau.to/ia/1ALPP00252
In this video, 1A Auto shows you how to repair, install, fix, change or replace a broken, damaged, cracked, faded, cloudy, or chipped signal light. This video is applicable to the Jeep Liberty, years 05, 06, and 07.
🔧 List of tools used:
• T15 Torx Driver 1aau.to/osA/1AXAA00008
• Ratchet 1aau.to/oapq/1AXAA00016
For More Info visit us at 1aau.to/h/bpn/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Bought a cheap replacement off of amazon that included the new lens cover and works great.
It's important to notice that chances are the latch will be stuck, which you'll need to pop off the lock and then pry off the latch inside if it is stuck.
They make it look so easy. The clip won’t allow us to disconnect from the housing. The red clip is all the way up but when we grab and pull on the tab it won’t release
Just got mine in the mail. Only 30 bucks a pair. Love old vehicles. Parts are cheap for them and easy to install!
+Trubz209 Thank you for your order! We'd love to hear about your experience. Here's a link to leave us a review on Google: goo.gl/i5JFNY
I had a hard time disconnecting my wires so I didn't :)
I "gently" put pliers on the plastic bulb socket & twisted anti clockwise to remove the socket & change the bulb :)
I EFFING LOVE YOU THANKS
I did that but the socket appears damaged
FOR PEOPLE TRYING TO DISCONNECT WIRES AND THINK ITS STUCK. Push tab down, push then pull. If you just pull it won't budge, was sitting with it for way too long
I pushed the red tab up pushed the black tab down pulled and pulled it won't come apart what to do? The socket needs replacing.
when you push tab and pull you may need to push first, I fought it for awhile before realizing this.. also you can change just light bulb by twisting and pulling may be snug.
push tab in and push unit down*
This worked for me
Wow! Thank you! I would’ve been fighting this for hours. It worked instantly ha!
Thanks for the tip! I posted before I read comments! Awesome that was easy Peasy after that! :)
THIS HELPED ME OUT!!!!! Thank you
I have a 2005 Jeep Liberty and I’ve had to rebuild the front end of the car and I’m really close. The last thing I need to do is screw it in but there’s no anchor for the t15 to screw into? Do you know what the parts called and where I can find it
The screw of mine is missing, I searched for T15 bolts but I don't see anything like the one on the video. Does anybody knows the actual size of the bolt and where to get it. A link would be help helpful. Thank you in advance.
Do you sell a replacment white clip that the t15 bolt screws into? or does anyone know where i can get a replacment?
What about the marker light below
how about "how to" replace/install the actual bulb in parking light? I relessedthe light unit but can't or don't know how to get to the actual bulb!
The description is inaccurate. It should be titled how to remove parking/ turn signal assembly and not the bulb itself, which is what everyone thought it would be about. Still appreciate your helpful vids.
Seriously not one video for changing the signal light bulb in the front for jeep liberty 2007
It's common sense to reverse it...
The description is completely accurate. It doesn't mention the word bulb.
The lever above the red tab is stuck and idk what to do, can you help with that?
+Lucky Dragon We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1AAuto.com
What kind of Screw Driver do i need???
Does anyone know what type of bulb it needs for the front turn signal ?
That's what I need, too.
THANK YOU WAS USEFUL... now i just need that fancy screw driver!!
Thank you for watching. Please let us know how the repair comes out! 1aauto.com?TH-cam&CTA%20Comment&ATony 888-844-3393
My dad had to put a lighter to the bulb to heat it up a small bit. The rubber was stuck. But a quick countetclockwise turn and it pops right out. Just the same as a headlight or brakelight. No pliers necessary. Especially if the plastic is brittle.
+Ava Cameron Thanks for the feedback!
How do u replace the plastic fender part ?
+Hitman Ghost 510 We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c
You say a Torx 15 I used a Torx 10 to remove mine. I have a 2007 Liberty. and one of the screws turned to dust
T15 was inacurate for my 2007 Jeep Liberty also.
This tail light video is really helpful to jeep owners too! Fix Yer Tail Lights!
I don't understand the part about pushing the tab on the back. It doesn't budge it doesn't move nothing is disconnecting. :(
Dang I broke that red clip for nothing could've just twisted it off to change the blinker bulb
I can't just replace the bulb??? Why would they make a light like this? Dumbest thing ever! But very informative video, great job!!!
+Matticulous Mee Actually, you can replace the bulb on the corner lights for the 2005 - 2007 Jeep Liberty vehicles. However, if you need new lenses due to dullness caused by abrasion over years on the road, we offer the parts on 1A Auto at the following link: www.1aauto.com/1A/parking-lights/Jeep/Liberty/1ALPP00252?TH-cam&CTA%20Comment&ATony
I pushed up the red clip and pushed the tab but the assembly does not come apart, it seems to be stuck so now I have to take the car to a mechanic because am afraid the part will break since it is plastic and over 10 years old.
Did they end up telling you why it wasn’t coming apart?
I'm just trying to replace the bulb for 2 bucks not the whole damn housing. That's absurd
Why are there literally no videos showing how to change the bulb? 🤦♂️
+RevvyP. We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c
White Parking Lights.
Es una mierda lo que enseña por qué me mori de frío preguntándome cómo se cambia el foco y no me enseño nada
this video sucks because its just a sales gimmick trying to sell you a more expensive and completely unnecessary part, which in this case is the housing unit ... there is no need to mess with the clip and disconnect the wiring ... simply grab where the base of the bulb would be, right were the gasket/seal is, turn it counter clockwise about 60 degrees, and the bulb will slide out of the housing unit ... replace the bulb and you're good to go
Dang I broke that red clip for nothing could've just twisted it off to change the blinker bulb