How to build a Ball Mill, for black powder
ฝัง
- เผยแพร่เมื่อ 11 เม.ย. 2016
- New video for you guys
Please read below! Thanks
High resolution Photos of the project can be found here:
imgur.com/a/5rsOZ
So this tutorials was created back in 2014 i decided to remake the tutorial since the old video was a bit crap...not that this isnt but anyways .
You might notice that some things dont make sense in the video like.
When i drill the pipe its silver
then i show a white on in the video. the safety pin changes from a bobby pin to a nail ., You can see that with the motor too, That is because i used old footage of the original video from 2014 .
You can use anything you want to power it, I had that old fan laying around so i used that, Use whatever you find more reliable.
In upcoming video i will show you how to make grinding media for your ball mill ,
Took a lot of work to make this, From making the actual ball mill to editing ,rendering the video 35 times because i had to re adjust some things. and get the best rendering settings I Tried some new settings too which should give me faster upload time .
about 6 hours of editing went into this
around 35 minutes of rendering
and more than 5 hours of uploading on youtube.
You can show some support by simply clicking the subscribe button . When i finally reach 100 subscriber i will be able to make a custom youtube url .
And if you actually read all that,Well thank you!
Music by kareful.
Thanks for watching more videos to come!!
Thumbs up. I liked it because you used all you could from the fan, the motor, the wiring, the switches and even the rubber feet, plus can be made with the minimum of tools. I get fed up seeing these professional workshops making things out of so called scrap or left overs when there is too much material to be so and showing of their latest high tech tool.
thank you very much for your kind words. I have to agree, sometimes the over do it
That is so true
Very good I liked this keep up the good work
Thanks for electric motor idea!
The instrumental is awesome thanks for sharing
What is gold milling?
How does a ball mill crusher work?
What is ball milling method?
How much the Ball mill? www.bestjawcrusher.com/products/ball_mill/?ifot
Pleasant and fun to watch.
thank you for the feedback!
I love the intro! (the content is usefull though)
Sir ,are you from india kolkata ?if yes please i want to talk.please sir i need this ball mill...
great job man!
Thank you :) perhaps you will enjoy some of my other tutorials too .
yes i've seen lots of them, thanks for what you do!
PYRO.SCHEP thank you for watching :)
Nice Vid
P.S. nice editing skills
Thank you ;)
You can use an electronic variable speed controller for fans up to 250W ,is mine and I control the speed of my fan.
toooo faaast buddy!
ive been making black powder. and griding other chemichals with this ball mill for like 3 years . so dont tell me its too fast.
if its too fast for you . put it in first gear
That's awesome! This video needs way more views!
And a question, doesn't it turn way to fast?
thanks! i agree .
well you can change the speed of the motor ,
but i always run it in the 3rd gear, works better for me
whats the can material? do the balls make sparks with a metal can?
No they dont make sparks, I use lead balls , or fishing weights .
the grinding jar is made of tin, which would not be suitable for many uses as its very thin and it can break apart,
What speed is recommended? I'm looking for a 300rpm motor but i dunno if it has to be faster or slower
not sure man, i have no clue what rpm mine is spinning at , but id say not faster than 300rpm
@@ZakamoozaI think about 650 RPM. that fast after using it is it normal?
What did you use for the jar?
Its a paint cant my friend , wrapped with garden soft tie wire
thanks
how much W was the motor?
denis Tenis however much the fan was, so around $15
Hello what is maximum quantity black powder u can do with that ball mill ??
depends on how big you build it , and what kind of jar you use, I can fill the whole container with black powder and still runs perfect , making about 500g of bp
What 3d software did you use?
Cinema 4D R12 ;)
Zakamooza thanks! I liked this vid
This beat is fucking sick can i have link pls
kareful-Remember this if Anything
kareful-in the dark
thanks for watching :) sorry for late reply i was away
its cool man thanks!!
Zakamooza can you tell me this : why didnt you put cooling fan behind the motor if you use it (whitout motor) it can burn!!
good point , i have thought of doing that before , but because it didnt have one in the first place, i decided not to put one.
Wanted to inform you , I now use a small fan to cool the motor, stays cool to the touch even after 8 hours of milling . thanks for suggesting this :) thumbs up
Hello, Zaka! Can i use Steel balls for miling or only lead? I understand that steel can spark. I just have a lot of steel balls, maybe if i cover them with aluminum foil, they won't spark?
NO! Do NOT use steel balls, not even covered by anything.....
Use ONLY lead, brass or marbles...
My fan is too weak :( I did make it but it didnt make one turn... Do you have any idea how to fix that?
is the fan spinning on its own ?
try to find a bigger fan ? ive made like 3 ball mills using different fans, and they all work . try to find one like mine
I did try But im going to try a washing machine motor
So first i need to find one
Ill send u some fotographs if you add me on yt youtu.be/addme/AM-D47ZLvKcGTpnP8LEHpl7SAtooWw
Cool vid, I never knew such a thing existed as a ball mill. Interesting. Wonderful music, too. Who is that by?
Thank you :) credits to the music artist is given at the end of the video, and in the description
Better just to buy rock polisher from Chicago Tool at Harbor Freight for $45. Much cheaper than buying a "ball mill".
not everyone lives in the US
6:15
*h e n t a i*
Whattt how the fuck u heard her
My grinding jar won't fucking grip on to the rods/metal pipes, I have tried everything you said but it won't work. I'm getting really frustrated, please help me😢😢
you tried adding that rubber tubing ? so it can grab it ?
if yes, try adding rubber bands around the jar
Zakamooza i tried both😢😢
***** can you send me a photo ?
i think it goes way to fast
put it in the first gear then . also when you load it with lead media it slows down, Lead is heavy
To fast running! Ballmill run with 70-90 rpm.
um why is it this music? why not country, or rock, or something else? This music was distracting I fast forwarded the entire vid. Good info, but dang that music!
thanks for the feedback, well some people dont like country, and some dont like rock :/ you could always mute the video if it is distracting you
thanks for watching ;-)
you are filming way to close
always! filming the stuff you need to see .
Music sucks