New Slot Car Room - Wired For Sound!!! Ep 46
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- This week the new slot car room gets it's multi-channel A/V system installed. Plus, let's take a quick road trip to Hobbyrama!
@HughesGarageSCA
Music featured on the channel
written and produced by SDH Music.
Copyright Shane D Hughes - All rights reserved APRA.
Don't forget to like, subscribe, share & be awesome!!! 😎
Loving the track layout & the sound systemYour passion for the hobby is infectious & I am loving it Looking forward to more updates
Thank you. Hope you’re making epic progress 😎👍🏁
Hobbyrama would break me $$$ Wow what a selection and killer store you have! I have yet to find a Hobby Shop like that in the states anywhere! And People think I'm nuts for having Stereo 2000 Watts of sound hooked up to mine! LOL Love the NEW layout its looking killer!
Yes, it’s a great store. I showed but a brief glimpse - there’s 2 huge levels. 2000 watts seems reasonable. What on earth is wrong with them? 🤔
I look forward to every Saturday night thank you Shane regards Malcolm from Adelaide
G’day Shane,
Just a thought mate but maybe call the corner before the poopshoot “the devils knob”?
If I’d have known that you were going to store the camera car I printed for you with the chew it’s I’d have planted a stealthy figure in the box and got him to pinch the chew it’s and return the box to sender 😜
Rooms looking amazing my friend and can’t wait to see it completed and I can honestly say that getting the axel box was the best decision I made regarding my track and gave me so many more cars to run around the track without having to drop an extra $50 to chip each and every car.
That’s just my 2 cents anyway.
Travis and I should be tackling the new ultra 4 axel box installation soon and I dare say it will make a decent video with a ton of expletives.
Thanks for the acknowledgment of the cam car, keep up the good work mate.
Regards.
Dave.
😂 The ‘Devil’s Knob’. You’re better at this than I am. 😂😂😂
@@HughesGarageSCA makes perfect sense to me if you were traveling through the highway to hell where else would the devil’s knob be but right behind the poop shoot 😳
Bravissimo bel lavoro. Sono Maurizio e ti seguo dall'Italia e precisamente da Torino. Anche io ho la mia slot car, poi se ti fa piacere ti mando delle foto. Pensavo di suggerirti, di mettere degli anti caschi negli incroci . Con questo sistema quanfo fai correre le cars fantasma, non si scontrano. Io li ho messi e vanno benissimo. Su you tube puoi trovare informazioni informazioni . Ciao da Torino!!
Thank you. All the way over in Turin! The world is getting smaller by the day. Have the best time with your hobby!!! 😎👍🏁🎉
Have you got any 4-15 curves? that might get get rid of the 1-30
1-30 and 1-60 are the same Radius the 30 means 30 degrees and 60 degrees
So the 4-15 are big radius and 15 degrees
Cool vids man
Yeah, they sound like the ones we need. 😎👍🏁
Are the naughty blu rays under the Chewits? Great video, looking good!
Hi Shane
Buy a 2400 x 1200 sheet for $31.00 and get the cut shop to cut it down to a manageable size - saves more money. Also the 3mm mdf is good underneath curved or bent sections of track
Shane it's looking great already, sounds awesome! The Poop Shute Challenge is going to look amazing with all the scenery around it, can't wait to see that! I have to say I miss your original intro music. Doesn't feel right to me somehow, The original music really went with the intro vid. Anyway, just an old fart here giving my opinion. Love your channel mate 🙂
Hi mate, great vid. Love your work so far. Solution to your problem - get a spare 2 30 and cut it in half yourself.
Will watch nownit many may know how talented n skilled you are when it comes to that type of wiring, n building studio setupsthose defusers look wicked
Your intro is by far the most entertaining. It’s inspiring a desire to update my own a bit! Great layout my man!! Keep up the good work
Come for the slotcars ,stay for the tunes ! Love it all.
3D printer is a must for this hobby!
Yeah, you are right. Would make a perfect Christmas gift for your fav TH-cam channel 🤗
@@HughesGarageSCA haha i'm in!
Yah that godzilla minus 1 was a snore fest. Extea teack not totally a useless. Never know when u may need a change up. The elevations are key..
Yes, the track pieces will come in handy… eventually.
Another awesome video!! May want to try 4/15 curves in your troublesome spot. Have had to walk away from mine for a couple weeks to work on outdoor projects. Wish I had the skills / talent to make great videos, mine are a bit lame lol. Just having fun, what its all about. Thanks for the inspiration sir! Well done!
4/14’s , huh? 🤔 so that’s where I went wrong.
Just got my Axel Box. Im done spending $ on chips. Grandson Axel loves it.
I think I shall follow your lead. 😎👍
The first number of the curved track is the radius number 1 - 4 and the second number is the amount of degrees covered in the turn. A 1-60 and a 1-30 have the same radius but are different "lengths". Check out Armchair racer's flat curve sections chart
And suddenly it all makes sense, thanks. I did explain at the store what I needed and was assured they were the right ones. Wrong. They are merely the ones you need for making a right angle turn with the 1/60’s, which is the absolute last thing I needed. Hence why I usually shop online these days.
Shane just love your videos, your room is looking awesome, like the Cannon 14.
Thanks Chris. Slowly coming together. Yes, the new slot.it cars are superb. I’ve had a couple of duds so far but the troublesome Lola suddenly seems to be behaving itself, which is great cause I love the look of that car.
Something I saw on another site: Johnnie Hobby that would be awesome for your layout (but might be too late to consider).
In a effort to be more 3 dimensional their tunnel actually runs in a tube Under the table.
I know you are planning to do a covered tunnel but I think under is better: more 3 dimensional, can run track over it at table level (even another layer above), lighting and your car camera would look awesome. Maybe put a camera in the tunnel (could display it on a cheap wall monitor or your tower screen).
What do you think ?
Oh yes, I know the exact feature you mean. 🤔🤔🤔
Great room Shane!
Maybe it won,t look so bad if you can at least make it look like a mountain pass.Buy adding trees and some over hanging rocks.🗿🗿🗿
You nailed it. I have since tidied it up, added guardrails, and run some laps. The cars love it, it has a great feel, and surprisingly works really well. Can’t wait to do the new scenery in that area. 😎👍🎉🎉
Go for it mate!
You are a mad genius! What are the dimensions of your track if I may ask?
2.4 x 4.8 meters
Love it mate
MDF...good stuff for dioramas mate!
And think of how you could have used them for borders....big savings!
Tedious painting, lots of patience.
Was indeed nodding off. And I missed one ‘red’ bit, will have to add later.
Hi Shane. Here is the 100th like! 🙂 I couldn`t believe the Behringer 19 inch Illuminator Rack Mount gave you an electric shock. I am pretty familiar with those 19 inch devices by Behringer. I got the 19 inch Tuner for my Bass Tower of Power, which includes an illumination and in my old club, we used a lot of Behringer 19 inch devices, like I mentioned. Well, they are cheap, but do the job often for little money. You could have put a piece of rubber, or plastic between the rack and the housing of the Behringer Illuminator to insulate it from the rack mount. Actually the Behringers Housings are earthed and should not give any electrical shocks. ??? I also have a few land mines for my Guitars and Bass Guitars. Also cheap, but the Flanger for Guitar and the Distortion Peda for Bassl are awesome. Any way, your mind tricked you out on the curve radius, didn`t it? The 1 stands for the Curve 1. Therefore it is the curve1/30 degrees radius. But you were smart enough, to get the 1/4 and 1/3 extension pieces, so problem solved for it. You seem to be smarter than you look, we have a saying here. Just kidding 🙂 Now let`s see that stage area build up comming in the next episode, I hope. I asked Tara on Sunday, if she had a guitar and bass player, because she had a drummer and kit in her line up. Sadly, she did not answer that on Pete`s stream on Sunday. That would fit to the stage set up. But wait, there is a singer missing, too. I will try to get her information on that, next sunday, if she attends at the stream. Keep`em comming Mate. Until then, keep your guide in the ditch. 🙂
For the stage… how does a classic wall of Marshall’s sound? 😉
@@HughesGarageSCA Fat, fat, fat 🙂
Where can we get a cd of your music here in the US
Sorry, not available. Yet. 🤔
Ok I liked! So I am awesome?🤣🏁
You most certainly are 😁👍🏁
Cutting mdf now that brings back some memories 😩 l might have a few things for you Shane I send a pic via messenger.
Cool
Wow it’s coming along amazingly
I knew it would you have a great eye for placement
Love it 🤘
Coming together great. Turning the Ferris wheel could be interesting. Keep up the great work.
Looks like you have a bit of taking apart and putting back together again to get that curve right but we all have faith in you buddy 👍👍👍
thanks for shout out ! nice to see stumppy return. everything is looking good just have to play with that curb to get right setup. 👍
Jesus mate! That's a saw!
I wore the teeth off the metal cutting bit, though. 😂