Yaskawa SGMG Servo Motor Repair and Test by industrypart.com Ltd
ฝัง
- เผยแพร่เมื่อ 16 พ.ค. 2024
- Yaskawa AC Servo Motor Repair and Test by industrypart.com Ltd
This film is about our repairs and tests on Yaskawa SGMG Servo Motors.
We use a custom software to track the position of the items to be repaired and documented.
In the following you will see repair and test of SGMG-20A2A Yaskawa Motor
At 0:55
1. Feedback EMF test
2. Measurement of isolation
3. Resistance measurement
4. Encoder test
Deconstruction of the motor (1:36)
Thorough cleaning (2:38)
1. Cleaning with glass beads
2. Steam cleaning
3. Drying in oven
Build up the motor (3:30)
Testing the motor (4:30)
Painting the motor (5:15)
Following Motors we can test and repair:
SGMG-01.. to SGMG-60.. all specifications with different encoders
for example Encoder UTOPH-81AWF or UTOPH-81AVF
We have a lot of Yaskawa units for sale and exchange.
Visit our shop, we can help you.
Thank you for watching!
example:
www.industrypart.com/Yaskawa-S...
Blog on our website:
industrypart.com/b/index.php/2... - วิทยาศาสตร์และเทคโนโลยี
The workplace is very convenient and the work process has a high level of accuracy and control
I got some questions of these process, It was only maintenance? Did they change the bearings? I saw two measurements, what scales of ohms did they use using the testers?
very well done
Shouldn't the rotor be placed in a sleeve upon disassembly to prevent magnet loss?
I have a problem in the servomotor model sgmgh-13dca6f-oy (it does not rotate
it Write error in the display table machine)
hi mr thank you for all informations, please can you show us how we can command a servopack sigma 2 SGDM 20ADA with a PLC (for example S7 300,400 or 1200 SIEMENS) and a type of signale that we should send from PLC to servopack thank you very much
for these motors are used?
Hello, how do I know the engine speed, and the position as well, do you have some equations, thanks a lot
May I know what is the purpose of the blue mark of the bearing when the bearing was heated?
thank you.
this is temperature marker to indicate proper bearng temperature. These are used widely in industry.
Can you test the encoder on an SGMGH with 17bit serial absolute encoder? I notice the TI5000EX does not yet support this one.....or can you get away with reading an angle from the a b z lines and aligning it this way?
This chocho from Shanghai China Do you need yaskawa motor testing video?
you can not check yaskawa encoder in ti 5000
@@fanuccnccontrollerpartsson5578
Dear sir how to test encoder alignment
Good
Donde lo envío