I think there are way to many variables in this tests due to slippage of position on wrench and when pressing it's created false data points the test would be far different if wrenches where in fixed position and vices didn't move around in test because that's where the parts flaied at first instead of seeing fatigued factures from stress applied vs slipping
Comparing those the thickness should also be considered. Thicker - obviously stronger. Many times a thinner wrench is more useful. The Millwaukee while impressive is also bulky.
The distance from pressing point to fixing point (torque length) needs to be fixed to ensure a fair comparison. Some tests failed to comply with this rule with minor shifts unfortunately, perhaps due to limited condition. However, this is still a valuable test and thanks for the wonderful work.
@@user-zs2zk2qy3z старый под квадрат, это вообще стёб. Я про современные, наверняка у американца есть такой же ключ с простым зевом и таких результатов там не увидишь.
Interesting. Most of these wrenches will do the job for the average task. But what is better? A rigid wrench that breaks or a less rigid one that gives and bends a bit? Is a rigid tool more dangerous (since it breaks)?
try on a BLOATED Lithium battery! can't find any videos of anyone trying to squish a bloated li-po / li-ion batteries. only normal AA ones.. atleast press it to its original size. I'm so tempted to squish my phone's bloated battery
The world doesn’t have much good to say about us Americans, but we always made quality tools. We made bulletproof appliances, too, until the Asians put us out of business.
Tru although snap-on is terrible price-quality ratio. The Asians produce according to specs you give them. The shareholders value is more important than quality. lower quality appliances; happy share-holders and the board.
You are absolutely right! The pitty is that you are in the EU. And they are running things ,together with France. But there is also a good side, Poland is less occupied by the USA then Germany. At this moment I think 😀
![[4K] TREASURE(트레저) “KING KONG” Band LIVE Concert 킹콩은 라이브를 찢어🦍 [it’s KPOP LIVE 잇츠라이브]](http://i.ytimg.com/vi/p8bLLOxPDD8/mqdefault.jpg)
![[Live สด] การออกรางวัลสลากกินแบ่งรัฐบาล งวดวันที่ 1 มิถุนายน 2567](http://i.ytimg.com/vi/3canzHC_d0k/mqdefault.jpg)
![แข่งแลกของ 1 วัน!! ของใครแพงสุดชนะ!! [Ver.2024]](http://i.ytimg.com/vi/joRT59ilPHg/mqdefault.jpg)
What about Facom?
I think there are way to many variables in this tests due to slippage of position on wrench and when pressing it's created false data points the test would be far different if wrenches where in fixed position and vices didn't move around in test because that's where the parts flaied at first instead of seeing fatigued factures from stress applied vs slipping
Comparing those the thickness should also be considered. Thicker - obviously stronger. Many times a thinner wrench is more useful. The Millwaukee while impressive is also bulky.
The distance from pressing point to fixing point (torque length) needs to be fixed to ensure a fair comparison. Some tests failed to comply with this rule with minor shifts unfortunately, perhaps due to limited condition. However, this is still a valuable test and thanks for the wonderful work.
Всё зависит от материала из которго сделан ключ, и всё! У американца вообще рёбра, он вне конкурса
1920 y - is milwaukee :) 17,2 mm
Crushing that hard wrench is amazing!😯🔧
Re-upload?
Very exciting. 👍
Würth ist nicht unsere beste deutsche Qualität. Nimm Hazet! 😎👍
There is a brand called Izeltaş in Turkey. It is the most prominent brand in Turkey. Please include that brand in your tests.
Good
Bro so close to get one million sub
Какая камера используется для медленной съемки? Или просто телефон в режиме slow mo?
да профссиональная камера по любому) какой телефон так снимает)
I think the closed end test might be more dramatic?
Американской ключ не корректно сравнивать, у него профиль зева другой!!!
а торцевой сторой ? милуоки какне крути намного качественнее любого) но и цена серьезная на набор такой будет
@@user-zs2zk2qy3z старый под квадрат, это вообще стёб. Я про современные, наверняка у американца есть такой же ключ с простым зевом и таких результатов там не увидишь.
@@user-nt6up9vu9d качество метала) ключ не диформировался)))
и веса раза в три больше .
MOLTO INTERESSANTE
这个是叫液压机吗？我看到那二维码好像是我国哪家公司的
Should try a Snap On wrench 🔧, & see if it becomes Snap off
Interesting. Most of these wrenches will do the job for the average task.
But what is better? A rigid wrench that breaks or a less rigid one that gives and bends a bit? Is a rigid tool more dangerous (since it breaks)?
One that bends slips on the bolts and one that doesn't suddenly breaks and flies on your face without giving any warning
And Facom ?
Hazet 💪
greatness of american made
Please press connecting road piston 🏎
You could try Turkeys best brand (izeltas)
If from Germany, then Wera. That is quality
Zumal Würth auch kein Hersteller ist. Da gibt's besseres aus Deutschland.
Milwaukee wrench, i think of Smokey Robinson, "you really got a hold on me"😅
try on a BLOATED Lithium battery!
can't find any videos of anyone trying to squish a bloated li-po / li-ion batteries. only normal AA ones..
atleast press it to its original size.
I'm so tempted to squish my phone's bloated battery
BRO YOUR CAMERA IS FADED!
Stanley vs sata vs proto 😢 plis
Where milwaukee tools are more expensive than wurth? In Poland are cheaper. A little
The no name its not bad just 33 cent !
👍🏻
if you are testing german tools, don't use wuerth. this is 2nd class tool. use tools from hazet or gedore
No Force Taiwan this time?
İzeltaş dener misiniz
Made in turkey
you should try pressing Limped Teeth, tag me! lol
I never see FACOM in your vidéo, it’s pity
Milwaukee 💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪
no wonder Mechanics bust knuckles, pushin wrench till it slips off the nut🤔😬
then they get even, with the Torch😁😆
Tekiro japan
USA ...
1
The world doesn’t have much good to say about us Americans, but we always made quality tools. We made bulletproof appliances, too, until the Asians put us out of business.
💵🤦♂️
Tru although snap-on is terrible price-quality ratio. The Asians produce according to specs you give them. The shareholders value is more important than quality. lower quality appliances; happy share-holders and the board.
what the hell is that Allan wrench made of Jesus christ
würth is kein hazet !!
Early
Snap-on i?
US Steel wins, more funny that the bar that was holding wrench, breaks first! Lol
Because Force Taiwan was not there.
GEDORE 🤨
Hazet 😁
Würth is not made in germany!
Chinese hydraulic press wins
I think it’s pretty clear to only buy American quality… this video proves it!!!
WHY THERE IS ALWAYS GERMANY NO POLAND. POLAND IS BIG TOO POLAND IS RICH TOO POLAND IS A WAY BETTER THAN gERMANY
What is your problem?
You are absolutely right! The pitty is that you are in the EU. And they are running things ,together with France. But there is also a good side, Poland is less occupied by the USA then Germany. At this moment I think 😀