How to Install a SRAM Transmission Groupset | Step-by-Step Guide
ฝัง
- เผยแพร่เมื่อ 14 ก.ค. 2024
- The Eagle Transmission mountain bike drivetrain system is the next evolution of drivetrain development from SRAM. Conceived and crafted through 6 years of refining the Eagle system and 11 years of dedicated 1x drivetrain innovation, Transmission is designed to enhance the riding experience with a first-of-its-kind approach that joins the entire interface between the frame, wheel, and drivetrain that sets a new standard for the industry.
Watch as our service manager, Erik, shares his step-by-step guide on how to install SRAM Transmission.
Needed Tools:
Multi-Tool or 5mm Allen Wrench
8m Torx
Cassette Tool
Chain Break Tool
Power Link Plier
Video Chapters:
00:00 - Intro
00:21 - Tools Needed
00:44 - Cassette & Cranks
00:54 - Install Derailleur
01:45 - Install Back Wheel
02:08 - Pairing
02:44 - Lookup SRAM's Setup Key Guide
04:05 - Adjust Setup Key Position
04:50 - Install Chain
06:00 - Position and Torque Derailleur
06:50 - Tighten Wheel Axle
Ready to upgrade your bike?
Check our stock of SRAM Transmission: thundermountainbikes.com/coll...
Get social with us for more!
Subscribe for more awesome mtb news & reviews:
@thundermountainbikes
Get the latest from us on Instagram:
/ thundermountainbikes
Hang out with us on Facebook:
/ thundermountainbikesse...
Visit us online for all your mtb needs:
thundermountainbikes.com
And, come #ShredTheRed with us in Sedona!
Thunder Mountain Bikes
1695 W. State Route 89A
Sedona, AZ 86336
(928) 282-1106 - กีฬา
This is the best installation video out there
Very well explained! Had NO idea how involved TRANSMISSION is when it comes to installation.
Well done. Thanks for
Thanks Erik! I learned a lot. Stoked to get this installed on my new bike!
pretty helpful vid. need to adjust the xo on a friends bike, and you explained it sooo good
Awesome! Nicely explained! Thanks
more simplified than Srams video. Thanks.
Let us know if these videos are helpful! We are always here to help.
This was the first video I came across in my search and it's so well done I didn't feel the need to look any further. Thanks !
change the spacers on the left 3.5mm and on the right becomes 7mm ?
I also Have this problem
Hey, I have a question about torque specs on the casette and cranks. Please someone answer me.
The cassette torque is 40Nm and the cranks are 54Nm.
Super helpful video! I thought I had read somewhere that you need to set sag to 0, is this correct? or do you set at 30% as you would for setup of a non-transmission derailleur?
happy to help!
You skipped the part where you installed the cassette on the rim