Hey Sir, wanted to say thanks for your review! Your video provides the best testing...which obviously helps us make good choices for what we need. I went with the real avid for gunsmithing...your accuracy testing really helped!
I've used the Capri Tools screwdriver in electrical for a couple of years now, it's definitely better than the Neiko I had before it haha. I like that it fits in my tool pouch without being so bulky but at higher torque it does take man strength to get the 50 inch pounds. I think the smart-torq would drive me nuts having to make sure I didn't accidentally move the red knob. Although obviously it's meant for scopes and maybe not construction. Your videos are always good stuff, thanks as always!
Hopefully I can test the Neiko at some point, but I can see how the Capri is better. Yeah torquing lugs in a panel would be tricky with the Real Avid, thats a very good point. No problem!
@Tools-Tested Hmm. I imagine it's doable, but you'd want an extension, or very long bits. I have a few from Japan, but I think I've also seen them from the German and Swiss brands. Still, quite bulky to carry and use. I feel like I'd get the Wera VDE torque driver for electrical installs, even if it's significantly more expensive. .... and for more cost, maybe pair it with the angle grip version, though it's not VDE. But it's more comfortable and easier to use.
I was sold on the Fix-It Sticks version... I have both versions of the all in one myself (6-25, 15-65 in/lbs). It is small, easy to put in a kit and can be driven with any standard 1/4" hex driver you have on-hand. You do have to pay attention while using it, as it has no "click" feedback to let you know when you've achieved your torque setting. They make some quality tools and I love the t-handle ratchet, but they are a bit pricy. Catch them on sale.
I have the Real Avid that cost me two years ago at $65, but I ordered from Amazon at the time Wheeler Fat Stix which cost $44. I checked Amazon's website today and Wheeler's Fat Stix price increased to $77; I knew when I first saw the Fat Stix, the price at $79, I ordered at the right time.
Just ordered (and received?!) the Real Avid driver today, since the price finally dropped below $65 again! Wow, this is a chonky little unit. Only complaint is that the grips are slightly oily. And it's a bit heavy?! But hopefully should last me a lifetime, and then some! Thanks for the recommendation!!
Both the Capri and the Real Avid look pretty good. Think I would prefer to have the torque assist at the top of the driver, aka the Capri, rather than the bottom like the Real Avid, unless you start to use extensions a lot. They do seem to have quite a high range compared to the torque screwdrivers I see over here in the UK. Very interesting to see them in action.
Yep really depends, defiantly the Capri for electrical work and the Real Avid for gun smithing. I did notice the Wera screwdrivers have smaller ranges compared to these.
Thanks for testing the claimed accuracy, I’m shopping for a torque screwdriver and your two videos were the only ones I’ve found so far that tested multiple brands. Do you have any experience with the Gearwrench 89620/89624 torque screwdriver? That has popped up a few times in my searches and seems nice and has a lifetime warranty. I’m also curious about CDI torque screwdrivers, CDI seems to be a good but expensive brand, curious how good their torque screwdrivers are.
No problem, yeah not many test videos out there for 1/4 torque screwdrivers. Well I was hoping to do the Gearwrench's and CDI but sadly I powered up the tester today and for some reason its not reading torque. So it will be a while before I can test 1/4 again sadly.
Suggestion for you... I would like to see you test bits. So many times I have bought torx bits that can barely torque to 30 in/lb because they warp. Would love to see which torx set brands can actually hold torque.
Basically if a mechanical torque wrench sits for a while it’s best practice to cycle it a few times before torquing a fastener. Most micrometer click style torque wrench’s will mention it in the manual. I have tested the theory and it seems to be true, I noticed higher torque before cycling.
As a long time Aviation Mechanic and home mechanic I must say your videos are fantastic and well worth watching.
Thanks! Glad you like them!
I picked the Real Avid at the beginning just because of the style and ability to dial in 1,2,3....✔️nice to see it works well too...
Yeah the ability to easily dial it in is nice, thats one thing I didn't like about the Wheeler Wrench when I tested it.
The accuracy is impressive.
Hey Sir, wanted to say thanks for your review! Your video provides the best testing...which obviously helps us make good choices for what we need. I went with the real avid for gunsmithing...your accuracy testing really helped!
No problem! Glad it was helpful! I really like the real Avid, its been good.
I've used the Capri Tools screwdriver in electrical for a couple of years now, it's definitely better than the Neiko I had before it haha. I like that it fits in my tool pouch without being so bulky but at higher torque it does take man strength to get the 50 inch pounds. I think the smart-torq would drive me nuts having to make sure I didn't accidentally move the red knob. Although obviously it's meant for scopes and maybe not construction. Your videos are always good stuff, thanks as always!
Hopefully I can test the Neiko at some point, but I can see how the Capri is better.
Yeah torquing lugs in a panel would be tricky with the Real Avid, thats a very good point.
No problem!
@Tools-Tested Hmm. I imagine it's doable, but you'd want an extension, or very long bits. I have a few from Japan, but I think I've also seen them from the German and Swiss brands.
Still, quite bulky to carry and use. I feel like I'd get the Wera VDE torque driver for electrical installs, even if it's significantly more expensive. .... and for more cost, maybe pair it with the angle grip version, though it's not VDE. But it's more comfortable and easier to use.
I was sold on the Fix-It Sticks version... I have both versions of the all in one myself (6-25, 15-65 in/lbs). It is small, easy to put in a kit and can be driven with any standard 1/4" hex driver you have on-hand. You do have to pay attention while using it, as it has no "click" feedback to let you know when you've achieved your torque setting.
They make some quality tools and I love the t-handle ratchet, but they are a bit pricy. Catch them on sale.
Yep they make for a very compact and quality setup.
Awesome job. It would have been awesome to see Wera’s two torque screwdrivers and gearwrench’s added to the test pile
Thanks! Hopefully in a month or so when the tester gets back from Snap-On.
I have the Real Avid that cost me two years ago at $65, but I ordered from Amazon at the time Wheeler Fat Stix which cost $44. I checked Amazon's website today and Wheeler's Fat Stix price increased to $77; I knew when I first saw the Fat Stix, the price at $79, I ordered at the right time.
Yep, everything just keeps going up, but 44 was a great deal.
Thanks for this great review! I just ordered the real avid from your link. Thanks again!
No problem! Im glad you found it useful.
Thanks for using the link!!
Appreciate the videos! Used your link for the Real Avid. Thanks!
Glad it helped! Thanks for using the link!
Thanks mate!!!!! Great methodology and process....
No problem! Glad you enjoyed it!
Great video keep doing what you’re doing
Thanks! will do!
Just ordered (and received?!) the Real Avid driver today, since the price finally dropped below $65 again! Wow, this is a chonky little unit. Only complaint is that the grips are slightly oily. And it's a bit heavy?! But hopefully should last me a lifetime, and then some! Thanks for the recommendation!!
(A wipe with isopropyl fixed the oil issue. Very pleased with this, overall!)
Nice, yeah thats the one I ended up keeping out of the bunch. I agree its a little chunky but the easy to read adjustment is awesome.
Both the Capri and the Real Avid look pretty good. Think I would prefer to have the torque assist at the top of the driver, aka the Capri, rather than the bottom like the Real Avid, unless you start to use extensions a lot. They do seem to have quite a high range compared to the torque screwdrivers I see over here in the UK. Very interesting to see them in action.
Yep really depends, defiantly the Capri for electrical work and the Real Avid for gun smithing.
I did notice the Wera screwdrivers have smaller ranges compared to these.
Thanks for testing the claimed accuracy, I’m shopping for a torque screwdriver and your two videos were the only ones I’ve found so far that tested multiple brands.
Do you have any experience with the Gearwrench 89620/89624 torque screwdriver? That has popped up a few times in my searches and seems nice and has a lifetime warranty. I’m also curious about CDI torque screwdrivers, CDI seems to be a good but expensive brand, curious how good their torque screwdrivers are.
No problem, yeah not many test videos out there for 1/4 torque screwdrivers.
Well I was hoping to do the Gearwrench's and CDI but sadly I powered up the tester today and for some reason its not reading torque.
So it will be a while before I can test 1/4 again sadly.
@@Tools-Tested that sucks about the tester, sorry to hear that. Hopefully it’s not an expensive fix.
Suggestion for you... I would like to see you test bits. So many times I have bought torx bits that can barely torque to 30 in/lb because they warp. Would love to see which torx set brands can actually hold torque.
Probably won't be this year, I did see ClientGraphics and PF have test videos on them.
Can you use the torque wrench to loosen the screws?
Is there a way to test torque spec at home?
If you do Wera, they have a pistol grip torque driver... would be interesting to see if that makes a difference.
Will do!
@@Tools-Tested It's just an idea... it's going to be on the expensive side I think.
Great tool reviews, Thank you for providing ideas.
Thanks!
No problem!
Nice review dude!
Thanks! Glad you enjoyed it
Which one will you pick the new Wheeler fat wheel or the Real Avid ? Which one is more accurate and reliable?
I would pick real avid bc u can dial in the single units.
@@Tools-Tested Thanks
Any chance of comparing the Wheeler Fat Wrench to all of these?
Already did in a earlier video th-cam.com/video/hymvUUKoRxQ/w-d-xo.html
Now, what about the real avid vs the wheeler from the other video?
Personally I would go with the Real Avid, yes the wheeler is smaller but the Real Avid is easier to read and set.
What would you pick between the regular wheeler and the real avid?
Definitely the real avid. Lot easier to dial in with the single digits on the knob, extra handle and better case. That’s the one I ended up keeping.
What's this "warm up cycle" I keep hearing about? I can't find a video on it or why it's important....if it really is.
Basically if a mechanical torque wrench sits for a while it’s best practice to cycle it a few times before torquing a fastener.
Most micrometer click style torque wrench’s will mention it in the manual.
I have tested the theory and it seems to be true, I noticed higher torque before cycling.
I'm not sure I'm going to need that extra avid torque lever. I mean I've been single for like 15 years now.😂
Legit review
Thanks!
wheeler is the truth
These vs 1/4 inch torque driver/wrench...🤔
So there all made in China
No, Fix it sticks and the Capri are made in Taiwan.
😊😊👍👍
Thanks!
Should always buy made in Taiwan.
Should try to avoid Made in China aka West Taiwan 😅
Lol soon to be east China...
@@Tools-Tested 🤣
None are the best. Nothing but nothing beats wera and Wiha.