ฝัง
- เผยแพร่เมื่อ 17 ก.ย. 2024
- This video shows how to replace the drivers side door wiring harness for 2nd Gen Acura MDX with a very common problem with any following issues
Shoutout to Skirmich ,for this write up below and instructions I also found online and followed his guide. Link Here
acurazine.com/...
Moderator
Hello Folks!
Special thanks to jon from mdxers.org for finding the solution!!
This is a small DIY on how to replace the Driver door sub-harness and what problems it can give if its damaged:
Symptom's (Incredible list for such a small cable):
1.- Door locks wont work
2.- DPMS wont work
3.- Rear view mirrors wont adjust or auto-tilt
4.- Power Tailgate wont open either by the FOB or Button in door
5.- Gas cap wont open
6.- Alarm wont engage
7.- Windows wont work
8.- Sunroof wont work
That is about all the problems that little bastard gave me.
Now how do we replace this little cable...
Models: MDX 2007-2009 (All Trims)
First of all you will need:
1.- Small flat screwdriver
2.- Flat screwdriver
3.- Part No: 32757-STX-A00
Total time to replace: Less than 5 minutes
Experience needed: None, Super Easy to Replace
I show you how to replace the defective harness with a new one . Easy anyone with basic skills can get it done .
THE PART I USED
ACURA/HONDA Part No: 32757-STX-A00
Like ,Comment,Share & Subscribe!!
Thanks for watching
ML Tube
Great video i had same problem an d i found this part on junk yard now my MDX is fixed thanks
Glad to hear !
Awesome video, great walkthrough, thank you!
Did it work for you???
It fixed my window but door still wont lock!!
Thank you for this valuable advice! It was exactly what my problem was. As soon as I took off that boot I saw that loose wire! If I can offer a little production advise? Drop all of the dead space where you go fetch tools and gloves as well as the mistake of not removing that plastic pass through gasket. I also will opt to simply cut those cables to make removal easier. Otherwise this was awesome and extremely valuable!! Thanks again sir
An add on, It took about a month the get that wire harness since so many Honda vehicles around this year are having the exact same issue. After watching this video I had the part installed in about 20 mins tops !!
Just fixed mine. Same exact wire broke. Thank you very much!!!!
Awesome! Glad I could help. Thanks for watching
I just an 08 mdx today and it has the exact same issue! To a T now I know how to fix it!! Thank you
Glad to help , did you get it solved?
Those are the same problems we are having. Can’t wait to try and fix it. Thank you
Yea it's a common thing , all the best you can do it !
Wonder if that "tab" was putting stress on wires causing them to crack in first place.Excellent job and patience.👍
Yea who knows , my door checkers are gone so the door has to be opened all the way and doing that might have also lead to the wires coming out.Thanks for watching!
wow !! I have the same thing ,, thank you ,, will order part , and see!!
Yea common issue, good luck, thanks!
Excellent, tutorial!!! Thanks 😊
Excellent video! Even if you “messed up” (learning curve), it was tremendous help.
Would not be feasible to remove that one “bar” holding the door on (nearest you), in order to widen the space to work; or, would that cause additional problems?
Thanks again!
Thank you sooooo much!! Is been insane !! But I will try to do this hopefully it works out !!
Yes it also drove me crazy for the longest time and was such a relief when fixed. Glad it helps and hope it works out for you! Please post back the progress
Great video thanks for parts number
Thanks for the video. My MDX has the same issues. Hopefully I can find the part and try this.
Glad to help , Good luck 👍
@@MLTUBE89so I got the part from eBay and it did not fit exactly but it fit good enough to fix my locks & windows. One step to add would be to check the plug connections before pulling pulling everything out. I have a 2008 MDX. Only the rear driver side window didn’t work after. I can live with that! But thanks fixed most of my issues.
Thank you for the detailed step by step instruction. When taking the old one out...could you not just snip the ends off and pull it thru? Would be faster than trying to finaggle it out.
Thanks so much! This totally fixed it
Nice fix!.....But why didn't you try to splice the disconnected wires back in the connector first to save Money buying the new part?
Just did this today thanks to this info!!! 🙌🏿
I may have missed it, but does this harness control all four doors? Or is the other side controlled by the harness on the passenger side. I know a car that has the two doors on the passenger side won’t block.
Thanks in advance to anyone who can help.
Very good video also.
Very impressive video
Why is the part number on the box different than the part number on the harness itself? The box ends in A00 and the part ends in A01
Good catch, I didn't notice until you mentioned it. I'm not sure why to be honest .
Great job thanks
Good stuff 😎
Thanks!
Thanks
How much was the cost of the part
Did you get the correct part? The replacement part I got has two green connectors
Yes I did and it's the right part. The colors aren't always same on harnesses as automakers have different vendors making them so they can vary.
On the door side, a square edge piece needs to be removed, just like on the car side. Now you harness looks funny on the door side.
No idea what your talking about but cool .
@@MLTUBE89 did you remove anything from the door side? If you did, it's all good. If you didn't, you need to remove a white piece of plastic. It's a square hollowed out
@Wei Su the White rectangle piece that sits in the rubber boot which clips in to secure it to door. Is that what you mean?
@@MLTUBE89 yes. I saw your boot on the door side is a bit bulky. Maybe my eyes not good
Mines broke also won’t shift out of park could that be my issue
Awesome the part I need help with you didn't film lol 😆
Did the best I can , I'm sure your capable of figuring it out.