One Man...No Fancy Lifts ...Trailblazer 4x4 Transmission Removal
ฝัง
- เผยแพร่เมื่อ 30 ต.ค. 2021
- One Man...No fancy Lifts. Trailblazer 4x4 Transmission Removal
Trailblazer 4x4 Transmission Removal
More Tips...Rusty Trailblazer Fuel Tank Pump Fix: • Trailblazer Front Diff...
Check out My Amazon Auto Accessories Store! Lets make that Weekend job less Painful!
www.amazon.com/shop/nathanroh...
Nathan is a participant in the Amazon Influencer Program. Your support is appreciated!
🔻Nathan's DIY Tools And Parts:
1. Kangaroo Original Standing Mat great for laying under autos : amzn.to/317yvZN
2. DEWALT Tools Set (192 Piece): amzn.to/2K04XZ42
3. Basic Mechanic Tool Set: amzn.to/2tEr6Ce
4. Professional Socket Set: amzn.to/2Bzmccg
5. Ratcheting Wrench Set: amzn.to/2BQjj8A
6. No Charging Required Car Jump Starter: amzn.to/2CthnUU
7. Battery Pack Car Jump Starter: amzn.to/2nrc6qR
8. Uniteco 1/2" Cordless Impact Wrench Kit, 18V Battery: amzn.to/2LxKVG
9. HD Nitrile Gloves: amzn.to/2KpGBaG
10. Fast Orange Smooth Lotion Hand Cleaner: amzn.to/2K0RCQ9
10. Mechanic Shop Towels: amzn.to/2JZuMIL - ยานยนต์และพาหนะ
My transmission gave out last Wednesday on my way to school to take my midterm for automotive. my trailblazer wouldn't move in any gear so I knew the transmission had to come out. A shop was charging me 1500 to replace it for a used one. Thanks to this video, I had the courage and confidence to do this job myself. Not only did I remove the transmission, but I replaced it for a transmission from the junkyard that was 400. Yea it's not gonna be as good as a new or rebuilt one, but now if I ever have to replace it, I know I can do it for sure because I already done it before, and it was all thanks to you sir. Thank you for this video.
Man I wish this video was here when my transmission blew. I regret getting rid of my trailblazer for a new car. Have put more money into a new Kia than I’ve ever had to put into my Trailblazer
I’m getting here eventually. They can pry my 2008 from my cold dead hands. Just replaced everything cooling system wise except radiator, flushed ok, no visible damage either side. 128,000 going strong.
Got an 05 I love it has almost 300k miles, having trans issues . This guy made it looks super easy.
Replaced my radiator and had the trans line pop off while driving. Emptied all the fluid, thankfully everything’s fine. See a lot of cooler videos say it helps. Good luck
Good job getting that out, Nathan! While it's out, I would recommend replacing the flex plate. They are a known weak spot on these vehicles, and something tells me you don't want to do this again to replace it! I would also replace any seals on the engine that you can get to. Definitely replace the transmission fluid lines. Again, they are prone to rusting out, and they will be much easier to replace if the tranny isn't in the way. When I'm doing a job, I ask myself three questions about a part: 1. Is it prone to failure? 2. Is it prohibitively expensive? 3. Is it a real pain in the you know what to get too? If the answers are yes, no, and yes, it gets replaced. Thanks for posting this!
You have the best camera work out of any mechanic on youtube. Great video.
I bought a RWD Trailblazer so that this and a lot of other repairs it would be easier. Bought it cheap cus it needed front suspension work. I replaced most of the front suspension parts . Fortunately my trans is ok so far. I replaced the brownish fluid through the dipstick tube. I did several exchanges to get a good amount of the old fluid out. A proper pan drop and new filter is on my to do list. Love the car.
Nice!
Are the non 4x4 all rear wheel drive?
Thank you for the great video Sir!
Great!
I have a love hate relationship with this vehicle. I love to watch you work on yours. I gave up mine in 2019.
I appreciate the videos you have incase I ever get another one.
damn u made that look easy
Nice work Nathan !!
I found this video very helpful, thank you for your help!
Word!
Thank you sir..my sister in law has a blazer blew out trans..looks like I'm going to take a go at it..Roger. Very informative..
Nice!!
Very well done.
Just viewed this video, good instruction and tip's. Sorry you're transmission jack walked, I've experienced that with other tools. Trying to help someone out.
You picked up the tempo of the video. Very good!
Thanks for the vid I'm about to take mine out this weekend hopefully everything goes like the video thank you God bless
Great!!
@@FixingWithPassion I'm getting a 3-4 clutch repair kit delivered tmrw and bringing it into a shop. I'll let you know how it goes - thanks for the vid.
OK, so I lost count but I think this is your third Trailblazer...right? Why do you keep doing this to yourself Nathan? One rusted lump after another. Now for me, I'm the original owner of an '08 Trailblazer so I stopped with only one rusted lump. I just replaced the power steering cooler, fuel fill pipe, all sway bar links, both quick struts, upper/lower control arms with ball joints & rear shocks. What I removed was a big rusted pile of scrap. In all my 57 years, I've never seen a vehicle with so much rust in so many places. I live in Pennsylvania, but I've had lots of vehicles in my life and none have rusted as bad as this thing. Thanks for all the TB videos Nathan; you gave me the motivation to keep my TB going!
Actually this TB has a perfect frame out of all Tb's I've own. I've own 3 the the past 3 years and that's pretty normal for me swapping autos its just something I do... Most have some frame issues in the NE and it comes with the territory. As for the videos, its content to help everyone out even me when i forget and go back to look at my own videos.
i've been doing phosphoric acid treatment and using a boroscope for inside the frame - and then paint and paraffin wax.... I got a 360 degree paraffin wax spray this time to make sure I covered the inside better. Took the bumper off to remove the rust off the rear - phosphoric acid gel spray left on overnight - and then painted it.
Very nice!
Nice!
I have a 02 Blazer ZR2 LS & it does cost $2200 for a tranny rebuild on the 4L60E.
When you run my VIN, my Blazer ZR2 shows up as a Trailblazer! Even on a scan tool, lol
That’s pretty cool
I'm working on a 2004 Chevy trailblazer LS trying to get the transmission out but it won't drop down so I can get the top transmission bolts out. Any ideas??
The little metal clip you broke on the drive shaft near the cap was on mine as well.
I wasn’t sure what it was either, I just replaced my factory u-joints a few weeks ago and noticed it.
Just worn useless piece of the U-JOINT. I’ve heavily kept an eye on my last Trailblazer U-Joint clip-looking-thing and it just rusted out. Didn’t hold a function, U-Joint still works, maybe it started scrapping or whacking. I’m on my 6th Trailblazer, I’ve sold 3-4
I hope is not too personal but here it goes whats the ball park charge for a job like that
$2,500-3,5000 💯 $1800 or cheaper if you find a good mechanic 👨🔧 I’d do it for $1,200. Junkyard transmission like $100-400
where can I find the cross member because my grandma got me an envoy and I need that specific part to my truck
Junkyard, or ig online but that’s a odd part that needs replacing even if it completely rusted out that’s weird.
Hi Nathan, that was a good job pulling that trany ON the grass, you may want to put a sheet of plywood or sheet metal so you can have lots of movement with your trany jack when you reinstall. Where can I send you a few questions regarding buying cars? Thanks, keep on posting
Nice. I do usually ;)
great video!thanks for your trailblazer videos, I've watched a lot of them. I have one question: when installing the new/rebuilt transmission, the upper 2 holes of bell housing have the 2 cooling line brackets, how do you keep them from sandwiching in between the bell housing and engine flange?? my dad and I rebuilt my ascenders transmission and every single time we lift the transmission, the brackets gets stuck in between. how did you get the transmission back on without the 2 brackets getting in the way?
How did you fix this issue? Was it easy btw? Sounds like brackets just hang until you put them in the holes ‘n all dat
My tb doesn’t have three bolts holding smog syst
My transmission will not budge with all bellhousing bolts removed it’s like it’s frozen on there. I do not see any place to pry on like you did
How did u fix this problem? Hammer and jab?
@@K1NGPUFF in the middle bolt holes of bell housing on right and left side is the dowel ( 9 o’clock and 3 o’clock ) you just have to kind of grab the transmission and shake it/ jiggle it profusely as your tugging and go back and forth from the 3 and 9 o clock bolt holes prying with pry bar . Once you get it started it’ll start coming alot more easy .
Take a lesson from me , when reinstalling new one , triple, quadruple check your torque converter is fully seated before you bolt up bell housing . If you hear a popping noise when bolting it back up it’s done , and you have to replace the transmission pump . I had to replace it twice . Jiggle and push the torque converter in till it seats a little further . Then jiggle and push it in a second time it will fully seat in even a little further . Make sure it doesn’t slide back out some when lifting tranny and mating bell housing .
Good luck
@@zacharyvaughn8135 thank you so much i appreciate this a lot 💯💯💯 I hope it’s not too hard and this job becomes natural to me. I appreciate you’re advice and tips I def was thinking the exact same thing and the torque converter is my biggest scare. I’m hoping taking the transmission out and putting a Junkyard one in won’t be a straight nightmare.
Also what’s the transmission pump? You had to replace it twice you said? Also how long did this job take you and did you use Jackstands/jacks
Great video brother. I have a question, does the "new/used" trans need to be programed before or after install or is plug n play?
No programing needed.
Not if you get the exact same one. I believe it’s like 2002-2005 than 2006-2010 two different types but maybe that’s just the Motors in these trucks. But double check plugs and if you have TRACTION CONTROL wise idea to make sure the one you putting in has it same with 4WD!
There's a job I hope I never have to do again. 5 times was way too many.
Why u did it 5 times? I wanna know
@@K1NGPUFF My friend replaced one. Then swapped drivetrain to another TB due to rust. Then that one had 2 drivetrain swaps, then another transmission after that.
What city/state are you in? How much $$$ to take one out & replace the cooler lines while you have it opened up? That didn't look that rusty. I've seen the result of someone take it out with the transfer case and the crossmember still attached. I don't think I can do the job...(handicapped.)
Like $80 a line for LABOR. Part is like $60-$180
I’m in Buffalo, NEW YORK
Mech quoted 3500 used install
Crazy
Go
♦🔷 todo el tiempo las mangueras cuelgan quisiéramos saber dónde van instaladas las mangueras de hule que van arriba de la transmisión Queremos saber eso
17:53 lead them down to the rubber hose
Hey I commented on your gold Taurus videos when you were fishing the heater core. Can you go and reply please. Want to hear from you. Thank you.
I like gold and I like Taurus