Nice job ! Running the flow meter pipe horizontally can cause condensate to accumulate before the flow orifice plate. it is better to place it vertically downwards
I agree I've seen that in the tests without filter now it's after the sand filter is it does a amazing job demisting the gas . Only 3.5 cm pressure drop at 6m3/h en about 6 for 10m3/h
@wenus525 . Yeah me to thats the best way to go . I would go for a diesel engine. Is a showed cr of 18.5 is oke for woodgas you only need to make spark plugs for a high efficiency engine. Then theoretically no turbo is needed to get high efficiency (30 / 35% thermal efficiency)
@@oscarverwey Turbocharger doesn't care is is from diesel or gasoline.... ... if you got big one it will need a lot of gases to charge. If you get smaller one it won't give you so much boost, but it will start at low RPM. It will help...
Great setup 😀 Unlimited power 👍
Nice demonstration friend and good installation
Waiting for next update ❤😊
Nice job !
Running the flow meter pipe horizontally can cause condensate to accumulate before the flow orifice plate.
it is better to place it vertically downwards
I agree I've seen that in the tests without filter now it's after the sand filter is it does a amazing job demisting the gas . Only 3.5 cm pressure drop at 6m3/h en about 6 for 10m3/h
Did you tried adding turbocharger (to engine)>?
Not yet but its on the list 😉 i have al the parts i need
@@oscarverwey I was thinking about small one, from fiat 1.6l for example
@wenus525 . Yeah me to thats the best way to go . I would go for a diesel engine. Is a showed cr of 18.5 is oke for woodgas you only need to make spark plugs for a high efficiency engine. Then theoretically no turbo is needed to get high efficiency (30 / 35% thermal efficiency)
@@oscarverwey Turbocharger doesn't care is is from diesel or gasoline....
... if you got big one it will need a lot of gases to charge. If you get smaller one it won't give you so much boost, but it will start at low RPM. It will help...
@@oscarverwey with diesel you have a problem with friction, diesel fuel has an oil addon to get proper lubrication