I dont know how or why, but I have oddly enough become addicted to restoration videos even though they make me extremely jealous of all these people with great garages and tools I wish I had lol
Dear Machinery Restorer, thank you for providing us with such high-quality clip of old machinery restoration. The way you shoot these processes is clear and comforting to watch. Yes, I am using the word "comforting." On a Sunday morning, I sit in front of the computer with a cup of coffee and watch the master--namely you--at work, and that feeling is comforting. You bring an old machine back to life and give it new meaning to serve again. Thank you very much.
I know I’m commenting on an older video but my dude, I say this with all the love in my heart, I am never bored watching this kind of thing, I like your process and the videos, but I have discovered that watching these after I get off my night shift really helps relax me to the point that I don’t even realize my eyes have closed and it follows me into a half awake state and then I’m waking up 4-5 hours later and it’s glorious- i don’t get a full 8 but I get something and I’m not anxious. Thank you so much for sharing this.
I never would have figured that watching someone overhaul a garden tiller would be interesting. However, I think what makes this interesting for me, is the way that it was edited. You showed constant progress all the way through, without spending too much time on one particular part or aspect. Quality production keeps my interest. Well done lad!
At first I was like why restore it, it isnt that old then I realized 1980 was 29 years ago. :-) edit: nope still wrong *39 years ago* damn doesnt seem that long ago.
Congratulations, you now have the best museum-quality $39 Montgomery Wards tiller ever sold. In a great market at the right auction that could bring perhaps $200.
I admire your dedication to making that old machine run like new. I'm stunned the difference. It looked like a complete basket case at the start, but it looks beautiful now. It was so satisfying to hear that little motor run again. Awesome job!
@@gus6rocks makes sense that it could be the reason, but IMO it would be better to leave a constructive comment rather than a thumbs down. His ability to restore equipment is already far superior to the average person, I can't see how one oversight deserves 140+ thumbs down. I'd like to see any of those people try and attempt this :)
gus6rocks - You wouldn’t just go and replace the piston rings due to visible signs of wear. First - you need a reason such as evidence of poor compression or a smokey engine but this is a 3hp garden tiller that doesn’t even turn over to start, so no evidence it has either of those issues. Second, in an old engine the rings, pistons, bores have all worn together, so you could end up making a good engine bad swapping parts out like that and ending up with the issue you were trying to fix that didn’t exist before but now does. The best thing to do in this engine is exactly what he did - get it cleaned up, run it, test it and if there are any running issues deal with them then. A quick run clearly demonstrated it was working fine and no such serious expensive mechanical fixes were needed aside from a strip, and a good clean, with only bearings and seals/gaskets needed. That’s how I would have done it too, and as Martin Murphy said it didn’t deserve a thumbs down not for any reason in my opinion. These machinery and tool restoration videos do such a fabulous job of encouraging others to dig in and see how things work, and really help look after our history. Upside down sticker - now it’s one of a kind. LOL.
gus6rocks - I know you gave one reason mate, you may be right in why someone gave a thumbs down, but you are WRONG in what you say, it is NOT BAD PRACTICE to re use old piston rings. It’s not like changing your brake fluid, brake pads, engine oil, coolant, or any other wearable part or consumable item that’s always to the benefit of the engine, if you just go and change piston rings you could be doing more harm than good, to a perfectly working engine. It would be best practice to change the rings, and pistons and rebore/hone the cylinders yes together, but BAD to change the rings alone. If you don’t understand that you don’t understand engines at all. And as he showed in the end result, engine ran fine. Sorry dude but you’re wrong
Built in 1980... and going by the looks of it immediately thrown in the Atlantic ocean where it sat ever since. Awesome work! I can't get enough of videos like this, there's something particularly satisfying about seeing something "irreparable" getting restored, 99.999% of everyone else would have immediately junked it as scrap metal!
Sometimes it can be quite satisfying to watch some of these restoration channels they make something that almost looks as if it's gone too far lost to time and nature yet they managed to turn back the clock and make it beautiful again from Cars to desk fans lawn mowers and in this case a tiller
Excellent job on an old piece. Always like to see things be restored rather than scrapped. And do such a thorough job as to rebuild the engine rather than repower. Enjoyed the video keep it up.
You seriously did an amazing job. I like your thought process and editing skills more than some others that do everything at once. You completely finish one piece at a time
The fact that there is no talk and weird accent (like in many other home/diy/tips/etc videos) makes watching this so immersive! Also very good editing, always keeping us interested with not too long or too short cuts, and also you are knowledgeable in the mechanics of things as well, some restoration videos are all about aesthetics only, but now I'm watching a skilled person
Amazing restoration... from junk, to a nice looking piece that is useful again! If I hadn't seen it with my own eyes, I wouldn't have believed it! Keep up the good work!
Decal is fine! I'd leave as a sign the machine was brought back from the dead and it now has a new direction in this world. Binged watched a few of your offerings and I've got to say, you do fantastic work! Thanks for sharing!!!
I have to say: This video was very nice to watch. Just do the work with a little description. No annoying music and no talking aaaaall the time. Thanks.
Looks as if it worked perfectly the last time it was used and was just left there untouched outside for years. These videos are so interesting. We are grateful that you are passing on your experiences and skills via this channel .
Because it's not actually rusted, its a method where you basically put it in fire, if left to rust without this method it would've gotten into the threading and made it alot harder, its something along the lines of rapid oxidation from the combustion of a material, meaning its just fast rusting
Tillers are VERY useful in hard soil. But you do not race it like in the video, you go very slowly. The tiller angle adjusts the depth and speed. Press handle down and it will dig in, lift handle up and it advances.
Those Briggs engines are great, just got an old 80s Briggs powered tiller to run after sitting for over 10 years. Going to use it then restore it and sell it on
That was a fantastic restoration, one of the best. I like the editing but I do prefer your narration over the video. Looks like you have lots of new shiny equipment too, polishing wheel, ultrasonic bath and a sandblasting booth. Nice work. More, more, more!
I was not remotely surprised when I saw this had c. 7,000,000 views. Im not mechanically minded but was fascinated to watch this restoration. Beautifully filmed in a way that made sense at every step. All the more impressive and interesting because of the absence of a voiceover. The images and progress did not need explaining. Thank you.
I don't understand why anybody would give us thumbs down on your videos I find them to be very helpful and informative and I can honestly say you did a great job on this restoration also It was a pleasure to watch
worked at an aerospace machine shop for years, and learned my lesson a few times with the ultra- sonic cleaner (industrial sized)...let a couple parts in over a weekend, running...non-existent by monday, lol
Come on give him a break about the decal... Yeah I noticed it also, but man oh man I’m shocked you brought it back to Life.!!! congratulations!!! Good work.
Nice save. You need to make a drag bar behind the tiller so you don't have to fight holding on to it. Set correctly, your hands should just be resting on the handles.. let the drag bar hold the tiller back, not you.
Wonderful restoration. I really liked the editing on this one. I’d watch these over and over. That clear sticker though!!!! That’ll be a easy fix... great job!!
What a truly excellent restoration! Some would say "Why did you go to such trouble?" I would say "Why not!" and very well done. You may notice that critics of this kind of video don't have the courage to post videos themselves---so ignore them, thanks for sharing.
Great job. Inspired me to get my own 5hp BnS Merry Tiller done. Nothing else to do during lockdown. Your video makes it look super easy. Love your cleaning machines. 😃
это двигатель русский мб 2 или 1 и глядя на моторчик ощющение кагбутто его спецально кислотой облили я знаю у людей он годами в огороде стоит и что б окись на олюминии была ни у одного
cергей Bsn скорее всего это русские украли этот мотор у американцев. Причём такие моторы в сша выпускали за долго до того как у нас вообще мотоблоки появились. И судя по состоянию всего культиватора , простоял он в сыром посещение лет так 30.
Приятно смотреть как старая, сломанная и уже много лет ни кому не нужная вещь попала в руки мастера, которому это по душе, подарил вторую жизнью Интересное видео! Молодец!
Hi everyone. Just to say I am aware of the 3hp decal being upside down. I am hoping to turn it around.
👌
great job daggerwin I mentioned machinery restorer in your live stream
Just wondering if you slapped your forehead like I do when I do this kind of stuff??!! :-)
No, it's a learning experience
It's your point of view, pay no attention to us. Thanks for a great rebuld.
I dont know how or why, but I have oddly enough become addicted to restoration videos even though they make me extremely jealous of all these people with great garages and tools I wish I had lol
P
85 toI'm OK km o hi
Me too
Exactly
start buying tools one by one. I buy one tool every month
Dear Machinery Restorer, thank you for providing us with such high-quality clip of old machinery restoration. The way you shoot these processes is clear and comforting to watch. Yes, I am using the word "comforting." On a Sunday morning, I sit in front of the computer with a cup of coffee and watch the master--namely you--at work, and that feeling is comforting. You bring an old machine back to life and give it new meaning to serve again. Thank you very much.
For sale: 1980s rototiller, used as boat anchor in atlantic since new.
It looked like it that's for sure. Must of been a yard ornament.
Just half looked like it was used as an anchor. The other half was covered somehow lol
😂😂😂
I know I’m commenting on an older video but my dude, I say this with all the love in my heart, I am never bored watching this kind of thing, I like your process and the videos, but I have discovered that watching these after I get off my night shift really helps relax me to the point that I don’t even realize my eyes have closed and it follows me into a half awake state and then I’m waking up 4-5 hours later and it’s glorious- i don’t get a full 8 but I get something and I’m not anxious.
Thank you so much for sharing this.
I never would have figured that watching someone overhaul a garden tiller would be interesting. However, I think what makes this interesting for me, is the way that it was edited. You showed constant progress all the way through, without spending too much time on one particular part or aspect. Quality production keeps my interest. Well done lad!
You can get addicted to restoration videos!
Dale D pplppl
Nothing like watching others work! It just chaps my ass when arm chair mechanics criticize this or that.. They should make their own damn video
(Ppl ppl) ?? I musta missed something
Goswen Gaming i
That was ridiculously satisfying
Shane Buckley and healing too
At first I was like why restore it, it isnt that old then I realized 1980 was 29 years ago. :-)
edit: nope still wrong *39 years ago* damn doesnt seem that long ago.
@@thewilddinkus8026 I know, right..
Had to watch it all the way through.
Congratulations, you now have the best museum-quality $39 Montgomery Wards tiller ever sold. In a great market at the right auction that could bring perhaps $200.
"This machine was built in 1980'
''since then, it was stored in the deep ocean'
I was thinking a barrel of muriatic acid!
like dio brando!
love your comment....it's awesome
@@leifhietala8074 My first thought was "Built in 1980 - and then immediately parked in the sea!"
Salt mine
I have extreme anxiety at night and watching your videos lowers my blood pressure and enables me to sleep, thank you
I must say I absolutely admire and appreciate your quality of restorations and your attention to detail.
It’s so great to watch how you helped this poor guy. After all it’s saying: “Thanks a lot! Now let me help you with your garden.”
I admire your dedication to making that old machine run like new. I'm stunned the difference. It looked like a complete basket case at the start, but it looks beautiful now. It was so satisfying to hear that little motor run again. Awesome job!
How in the world could anyone give this a thumbs down? Geesh, you do a wonderful job, and thank you for sharing!
Using old piston rings that had visible signs of deterioration would be on reason.
@@gus6rocks makes sense that it could be the reason, but IMO it would be better to leave a constructive comment rather than a thumbs down. His ability to restore equipment is already far superior to the average person, I can't see how one oversight deserves 140+ thumbs down. I'd like to see any of those people try and attempt this :)
gus6rocks - You wouldn’t just go and replace the piston rings due to visible signs of wear. First - you need a reason such as evidence of poor compression or a smokey engine but this is a 3hp garden tiller that doesn’t even turn over to start, so no evidence it has either of those issues. Second, in an old engine the rings, pistons, bores have all worn together, so you could end up making a good engine bad swapping parts out like that and ending up with the issue you were trying to fix that didn’t exist before but now does. The best thing to do in this engine is exactly what he did - get it cleaned up, run it, test it and if there are any running issues deal with them then. A quick run clearly demonstrated it was working fine and no such serious expensive mechanical fixes were needed aside from a strip, and a good clean, with only bearings and seals/gaskets needed. That’s how I would have done it too, and as Martin Murphy said it didn’t deserve a thumbs down not for any reason in my opinion. These machinery and tool restoration videos do such a fabulous job of encouraging others to dig in and see how things work, and really help look after our history. Upside down sticker - now it’s one of a kind. LOL.
You could ask that about any video on YT. Someone could save a drowning puppy from a frozen lake and it will get some down votes. Go figure.
gus6rocks - I know you gave one reason mate, you may be right in why someone gave a thumbs down, but you are WRONG in what you say, it is NOT BAD PRACTICE to re use old piston rings. It’s not like changing your brake fluid, brake pads, engine oil, coolant, or any other wearable part or consumable item that’s always to the benefit of the engine, if you just go and change piston rings you could be doing more harm than good, to a perfectly working engine. It would be best practice to change the rings, and pistons and rebore/hone the cylinders yes together, but BAD to change the rings alone. If you don’t understand that you don’t understand engines at all. And as he showed in the end result, engine ran fine. Sorry dude but you’re wrong
no music no commentary just pure restoration goodness. turned out beautifully! thanks for sharing
Built in 1980... and going by the looks of it immediately thrown in the Atlantic ocean where it sat ever since.
Awesome work! I can't get enough of videos like this, there's something particularly satisfying about seeing something "irreparable" getting restored, 99.999% of everyone else would have immediately junked it as scrap metal!
Great job you're a good mechanic.
Amszing mehanik, good restoration!
You took her back in time. She looks beautiful. Thanks for posting that one.
Sometimes it can be quite satisfying to watch some of these restoration channels they make something that almost looks as if it's gone too far lost to time and nature yet they managed to turn back the clock and make it beautiful again from Cars to desk fans lawn mowers and in this case a tiller
I'm great at pulling things apart....Putting back together is another story
I am the same way
Holy shit, maybe we are related!
Same here, I usually end up with spare parts
Same. Usually I have some extra parts left after assembling :)
A am the opposite
@@_Dwarkin I repaired a battery hedge trimmer and have 3 screws left over DOH!
Wonderful dedication to the job. When you revealed the Flymo decal… wow… could see she’d be a beauty and I wasn’t disappointed. Thanks
Wonderfully done. So nice to see apparatus beinig serviced by you, will get a new lease of life. Thanks for sharing!
Excellent job on an old piece. Always like to see things be restored rather than scrapped. And do such a thorough job as to rebuild the engine rather than repower. Enjoyed the video keep it up.
What a brilliant job, love doing these restos!!!! Well done.
That tiller looks like its having a blast! 🤣 finally able to play in the dirt again after all those years! Awesome project.
One of the coolest videos I’ve seen in awhile. No narration needed you and the little Briggs spoke volumes without saying anything at all !
Watched this as my 6hr headache simultaneously began to lift - talk about heavenly ;) Beautiful restoration work!
Amazing restoration, a pleasure to watch.
I really like quality restorations. Very satisfying, kind of like a relaxation video for detail oriented people, lol.
I dont know why but this is the top 3 things i have spent 25 minutes of my life on
Love the restoration.
Glad the original decal was kept.
Top job. Bringing these old rusty heaps back to life is so rewarding and satisfying to watch. Simply excellent.
Просто красавчик молодец мне как механику просто приятно когда есть такие люди.спасибо.
You seriously did an amazing job. I like your thought process and editing skills more than some others that do everything at once. You completely finish one piece at a time
You did a great job. Was so good to watch
I don't know why I feel satisfied when watching this kind of restoration video especially no inferior background music & voice-over.
Very nice - a simple, but neglected old machine restored to like new condition and running well. Good job!
I was born in 1980, your work is a wonderful. Hello from Russia.
When i can't sleep, i watch restoration video and more japanese live seafood.
Don't forget instant karma video.
Thank you for the great content :)
The fact that there is no talk and weird accent (like in many other home/diy/tips/etc videos) makes watching this so immersive! Also very good editing, always keeping us interested with not too long or too short cuts, and also you are knowledgeable in the mechanics of things as well, some restoration videos are all about aesthetics only, but now I'm watching a skilled person
In every restoring video you do, i keep seeing only a lot of hand skills and passion !!! Magnificent job !!!!!
Amazing restoration... from junk, to a nice looking piece that is useful again! If I hadn't seen it with my own eyes, I wouldn't have believed it! Keep up the good work!
good job!!!!
Decal is fine! I'd leave as a sign the machine was brought back from the dead and it now has a new direction in this world.
Binged watched a few of your offerings and I've got to say, you do fantastic work!
Thanks for sharing!!!
I have to say: This video was very nice to watch. Just do the work with a little description. No annoying music and no talking aaaaall the time. Thanks.
Agreed - I want to watch the takedown and the repair. Incessant talking and too much music detracts from the quality of the video.
Amazing!!! Awesome work! Giving new life to something old and discarded has to make you feel really great. Thank you for posting what you do!
good job!!!!
Looks as if it worked perfectly the last time it was used and was just left there untouched outside for years. These videos are so interesting. We are grateful that you are passing on your experiences and skills via this channel .
Love seeing these old machines being restored and working again. Looks like it had a rough outdoor life. It deserved to be restored. 🙂
Engine rusty and from the 80’s spark plug still comes out... meanwhile at ford
I know exactly what you speak of. Got a kick outta that one.
Yeah no joke.. that #3 plug
Sean Spell stop
Because it's not actually rusted, its a method where you basically put it in fire, if left to rust without this method it would've gotten into the threading and made it alot harder, its something along the lines of rapid oxidation from the combustion of a material, meaning its just fast rusting
@@jordanfenwick123 it a joke about fords not chem class home boy 😂😂
never understood tillers.. Tears it all up we follow behind and crush it all down with out feet trying not to get chopped up in the midst
I actually drag mine backwards for that very reason.
tillers are supposed to be pulled not pushed
Tillers are VERY useful in hard soil. But you do not race it like in the video, you go very slowly. The tiller angle adjusts the depth and speed. Press handle down and it will dig in, lift handle up and it advances.
Youre back! You saved my day.
Bravo! Expertise, good tools, and the patience of Job.
this beutifol restoration!!!! And good job!!!
Those Briggs engines are great, just got an old 80s Briggs powered tiller to run after sitting for over 10 years. Going to use it then restore it and sell it on
i love how his videos have no ads :P
I love these types of videos! Great job on the restoration!
That was a fantastic restoration, one of the best. I like the editing but I do prefer your narration over the video. Looks like you have lots of new shiny equipment too, polishing wheel, ultrasonic bath and a sandblasting booth. Nice work. More, more, more!
This great job!!!!And good video!!!
Being a small engine tech myself for 30 years...since I was about 13...Great Job!
I kinda work with gokarts and small engines as a hobby.
One of the rustiest machines I've seen restored - Great job!
Fantastic bit of editing there must have taken you ages and top work on the tiller she looks great.
Enjoyed watching this video, a great inspiration for a DIY person.
Excellent video. Enjoyable from start to finish. Didn't get bogged down with minutiae and flowed well. Congrats.
I know nothing about mechanics, but I really enjoy seeing old machines brought back to life. An excellent video.
This is unbelievable! I love watching your videos! It's quite amazing how you can take any old run down machine and restore it to new!
Shiny!
Yup
Now that’s a skill AI will not take away, great job!!
I've watched several restores from this guy and he always does and outstanding job ... keep up the GREAT work!
A joy to see a great old machine purr once again.
I was not remotely surprised when I saw this had c. 7,000,000 views. Im not mechanically minded but was fascinated to watch this restoration. Beautifully filmed in a way that made sense at every step. All the more impressive and interesting because of the absence of a voiceover. The images and progress did not need explaining. Thank you.
Your hard work was paid
Such as an amazing inspiring vid😍
excellent job! I believe you're missing the spud which would replace the wheels with a drag rod to make it easier to use. Works this way too though!
Absolutely great job my friend.. thoroughly enjoyed watching this video. Greatly appreciated. Thank you 😀👍🏆
Amazing, you really brought that back from the dead.
Glad to see it work and look like new again. Thanks for sharing.
Thank you for this awesome video. Good editing on it too. You have great skills, talent and knowledge with these engines.
Nice work, I’m always amazed how you find the parts for a 30 year old machine. Great job 👍
Not that hard.. doing a full OEM restoration on a 1969 honda trail 70..
Top notch restoration very nice job. Love how it came out
I don't understand why anybody would give us thumbs down on your videos I find them to be very helpful and informative and I can honestly say you did a great job on this restoration also It was a pleasure to watch
This was a joy to watch. I think I blinked less than a handful of times. Gorgeous work. It must be so much fun to work on these machines.
Motor has that familiar look of being submerged in flood waters.
Yes, SALTY flood waters.
I dread to think how long this must have taken, good video and good skills
Probably a week.
Probably one of the best videos I've seen on TH-cam. Great job!
Check out my mechanics. His attention to detail is much better. I came here after binging on his vids and found this one lacking.
Thank you for resurrecting this equipment
To say you've done a perfect job is to say nothing. In my eyes you are a magician. I take off my hat!
worked at an aerospace machine shop for years, and learned my lesson a few times with the ultra- sonic cleaner (industrial sized)...let a couple parts in over a weekend, running...non-existent by monday, lol
Hold up, so the corrosion became non-existent?....or the parts?
@@martinramirezjr7872 the parts were completely disintegrated from the ultra sonic cleaner
@@gregleblond6039 Dear god.
@@martinramirezjr7872 try explaining that one to the supervisor
Wait so it uses sound to remove corrosion
Come on give him a break about the decal... Yeah I noticed it also, but man oh man I’m shocked you brought it back to Life.!!! congratulations!!! Good work.
You did an amazing job on that, I tried to restore the exact same model as that but I couldn’t get parts for it, so great job
I was wondering where he found some of those gaskets for a tiller from the 80s
Beautiful work
Another beautiful restoration and so great to see it doing the job it was built to do. Love those old Briggs "L" head engines!
Nice save. You need to make a drag bar behind the tiller so you don't have to fight holding on to it. Set correctly, your hands should just be resting on the handles.. let the drag bar hold the tiller back, not you.
Yep, these type of tillers usually came with a spud. You're probably missing that piece but you can't help that the previous owners lost it!
me at the end of the video after watching 23 minutes of cleaning: "noooo, you're getting it dirty!"
Lol
yea same im like whyy
Wonderful restoration. I really liked the editing on this one. I’d watch these over and over. That clear sticker though!!!! That’ll be a easy fix... great job!!
What a truly excellent restoration! Some would say "Why did you go to such trouble?" I would say "Why not!" and very well done. You may notice that critics of this kind of video don't have the courage to post videos themselves---so ignore them, thanks for sharing.
Great job. Inspired me to get my own 5hp BnS Merry Tiller done. Nothing else to do during lockdown. Your video makes it look super easy. Love your cleaning machines. 😃
What a good job 👍👍
Amazing job...I would have written that one off!
приятно видеть когда технике дают вторую жизнь!
автору лайк!
Да, на такие вещи можно смотреть... и смотреть...
это двигатель русский мб 2 или 1 и глядя на моторчик ощющение кагбутто его спецально кислотой облили я знаю у людей он годами в огороде стоит и что б окись на олюминии была ни у одного
cергей Bsn скорее всего это русские украли этот мотор у американцев. Причём такие моторы в сша выпускали за долго до того как у нас вообще мотоблоки появились. И судя по состоянию всего культиватора , простоял он в сыром посещение лет так 30.
Не бит,не крашен, в гараже стоял. 😀 Мужик молодец.
Love that you care about these old machines that just need some tlc, that thing was happy to be alive again
I picked up a tiller off the side of the road, no small effort, and it looked like an archaeological excavation. Thanks for this detailed breakdown!
Вот это круто, чувствуется любовь к технике 👍👍👍👍
Причем, более сильная, чем ,порой, к девушке.
Digno de admirar esta restauración!! Increíble!!
Show us more sped up sandblasting. Very satisfying. Good work, Thanks!
Restoration videos are so entertaining. So interesting and the results ... It works! Keep up the good work
Приятно смотреть как старая, сломанная и уже много лет ни кому не нужная вещь попала в руки мастера, которому это по душе, подарил вторую жизнью Интересное видео! Молодец!