@thirdmaster Hello thirdmaster and thank you for watching. As for your issue while in midi mode, make sure that template 01 states "new template". if that's not the issue then make sure that if you use a kit or otherwise a group, that set it is set up using midi batch set up "sounds to midi notes. as for that sing pad, it's probably a sound loaded into that pad and not a group. perhaps try putting the maschine into pad mode before going in to midi mode. hope that helps.
@thirdmaster As far as the note being very low in volume, open up the NI Controller editor. under Maschine controller, go to the mid-bottom right of the screen and under "pad velocity cure" use soft 1and that should take care of that problem.
Hi... gud 1 man... HAve U ever come across any troubles with Maschine n Logic (sync issue, Timeout, Connection getting lost,etc).. Hope both syncs very well... So do u recommend this Maschine... as I am hardcore Logic Pro user... I also would like to know how map MIDI controllers in Logic... I have nanoKEYS and CME UF70...I wanna use both the controllers mapped to different tracks... cud u guide me or do u have any video for tis??? Thanks in Advance....
Thank for the lesson...just bought the machine. I'm much more comfortable with logic then have the machine do all my arrangement. Question? Can you automate the machine internal plugin in logic automation. It didn't work when I try. Thank if you can help out.
Hey Anthony! great video man thank you very much. I have a question for you. I have done everything said on your tutorial video, but for some reason when i turn my maschine into midi mode it wont sound at all.. do you knkow if there is something else in the sync process?
@03killak Im actually using a mac..I use the maschine mikro and in it are buttons f1-3 on there..I have to hold shift and f1 (has the word midi on top of it) and group E to get it to work..it might be a little different if u have the regular maschine
@03killak yea i did..it worked when I had everything set up to group E. so do everything he says (the whole sound to MIDI notes thing) and then hold down shift, F1, then Group E all at the same time and it should work. I'm trying to get it done to other groups but for now I'm just sticking with this.
Hey, Great tutorial. I have an issue though, I open up the maschine software, every pad sounds fine, everything's working right, then I open up logic pro and when i press the pads, there's no sound. I configure everything how you said, with the groups, I hold shit and control, new template etc. Still no sound from the pads. Everything is set up n logic pro how you explained also. What's the deal?
Great vid. Sounds to midi notes doesn't work for me though - no sound comes out once I go into MIDI mode on maschine. I can get individual sounds - but the problem is that I cant select a second sound and record that to a separate track on logic. My logic is version 9.0.0... maybe i need update - maschine is current. So far its just easier to drag tracks as audio - not exactly syncing though.
Having followed your instructions, when recording in logic I am not able to hear what I have recorded although it records the notes, it always recorded in another octave for example C-1 instead of C3. (After holing shift F1) I am not able to hear my custom kit when it is in the default template mode.. How do I solve this?
SOLUTION on the no-sound-problem: set root note to C -1 (not C 3) when you're in maschine sound midi batch setup it worked in my case, hope this helps!
@letmefookinwatch I'm having this same problem. Everything is set up as in the video. However once I switch to Controller mode (Shift+Ctrl) I get no sound through Logic. The MIDI notes will still record on the instrument track. But the MIDI will not trigger the Maschine. I'm pretty sure its a setting or something simple. Trying to find solution. Any suggestions?
when use maschine as controller for logic, my pads sound so weak, have the bang the pad to get the full sounds... is there a way to set the pads at full velocity? thanks!
I too have the same question, is it possible to do it in maschine mikro??? I just did everything you did, I get tha sounds to appear on logic_ but they don't record : /. Wad am I doing wronG?
how could i load my own drum samples that i downloaded in mp3 format.. for ex. i want to add one mp3 kick file and a hi hat and maybe some snares onto the maschine.. how could i do that? thank you
I got everthing down to a tee except how do you put macschine into midi mode. You said shift and control right? Nothing happens....what am I doing wrong?
great video, when I hit shift and control on my maschine the shift dosent stay lit up and the control button only stays lit up....i just cant seems to record directly into logic...any help thank!!!!
@anthonyguitarsav Hi I have logic express 9 and a maschine mikro I am curious and confused when you say "shift + control" to put my maschine in midi mode. If you could go into further detail in a message or comment reply itd be greatly appreciated thanks.
hiya dude.. useful video. i am however having an issue.. hopefully you can help. I've done as the video has shown.. sounds are playing from maschine in logic, but when i switch to midi mode, i get no sounds, but im still able to record the midi notes. any light you could shed on this would be hugely appreciated.. ta
For some reason I can't open maschine on the instrument track? I can only open it on the inserts. I'm new to Logic but I have ver 9 and I"m using 1.7 maschine. please help.
Hi I did everything as described in the video, but my maschine once i put it into midi mode doesn't play anything (i'm talking about the drum kit using mode).
hi why Since i turn on Maschine into Midi mode - template 01, nothing is working well the kit is not display on the pads, there is only one note and very very low note any help please ?
So when i hit shift F1 on my machine mikro everything works but it seems its stuck in "keyboard mode" i have the same sound on all 16 pads just different pitches... how do i fix this
hey, so i did everything you said to do with logic and maschine but im putting my maschine mikro into midi mode and it is recording in logic but i cant here the sounds or instruments!! i put it into midi mode and it says 01 Default, or. 02 Abelton Live. im stuck here and im just on default but i cant here any sounds when i hit my pads! PLEASE HELP ME!!!!!!!
Are you using "shift + Control" on the maschine or "shift + ctrl" on your keyboard? And if you have figured it out by now then disregard my comment haha
@IZMAYHEM hey I just found out how to stop the preloaded song...at the bottom left of maschine controller on the screen there's a button that looks like a refresher button...click that and it will clear the preloaded song
when i open logic pro i have audio track opened and cant select maschine to open up? It only has input 1 then when i click that has options to select input 2, 3, 4 etc how do i get maschine to show up so i can select it to open?
wassup bro.. im tryin to record mashine into logic, and use the note repeat and octave changes etc, into logic and its only letting me record whats on pad 1.. for instance.. i setup on pad 1 a kick drum.. on pad 2 a clap.. and on pad 3 a hi hat. but when i press "shift control" to put it in midi mode, its only letting me record the kick and not the clap and hi hit.. help me out please! thanks!
Hey Anthony, i've followed and did everything you said but logic is not responding, im able to record and its recording but no sounds coming out of logic when trying to play what ive recorded, Can you pls help?
Logic is not responding to any midi input.. i did all the things you say and i put my maschine in midi-mode and nothing... logic is not responding... i need this pretty bad because im sick of the maschine interface and creating beats in there... i want to get it out into logic... help!?
HELP! I press record and see a green block signifying recording but no sound! The audio from the Maschine isn't recording. And when I switch to MIDI controller mode (shift + control) I lose sound through logic. I NEED HELP! This is driving me insane!
I would like to give a big thank you to everyone who checked out my tutorial. Also thank you for all the feedback whether good or bad. Sorry if I did not reply to every one's questions or concerns, I never intended to get so many views and comments. It was just a video I wanted to put out to anybody who shared my frustration with the Maschine and Logic Pro setup. In the future I plan to make better and updated videos on similar subjects. Peace out!
@anthonyguitarsav @thirdmaster I swear that what happened to me right now. Pads work when you turn off the midi mode, but when I, "Shift+Control" all i see is lit notes and no sound...FML
Tried this and wasn't able to get Logic to trigger Maschine sounds once hardware was set to MIDI controller mode (Shift+Ctrl). Then watched this video and found a simple solution. Select GROUP E on Maschine controller (in MIDI mode). Once I did this, everything seemed to work accordingly. Try it out. Hopefully this helps.
good stuff man, the video was right on the money. Everything else I found made it way more complicated than it needed to be and twice as long. Cheers
Thanks finally a Video with goes straight to the point.
HA! Just had 2 put my maschine mikro on midi mode.. Now it's workn!! Thank you very much 4 the schooling.
Thank you sir, finally I can record my beats. I was really frustrated before your vid.
Thanks man bro the best and easiest tutorial about this subject !
@thirdmaster
Hello thirdmaster and thank you for watching. As for your issue while in midi mode, make sure that template 01 states "new template". if that's not the issue then make sure that if you use a kit or otherwise a group, that set it is set up using midi batch set up "sounds to midi notes. as for that sing pad, it's probably a sound loaded into that pad and not a group. perhaps try putting the maschine into pad mode before going in to midi mode. hope that helps.
@thirdmaster
As far as the note being very low in volume, open up the NI Controller editor. under Maschine controller, go to the mid-bottom right of the screen and under "pad velocity cure" use soft 1and that should take care of that problem.
Hi... gud 1 man... HAve U ever come across any troubles with Maschine n Logic (sync issue, Timeout, Connection getting lost,etc).. Hope both syncs very well... So do u recommend this Maschine... as I am hardcore Logic Pro user...
I also would like to know how map MIDI controllers in Logic... I have nanoKEYS and CME UF70...I wanna use both the controllers mapped to different tracks... cud u guide me or do u have any video for tis???
Thanks in Advance....
thank you so much! quick and to the point. great video
is it the same setup for maschine mikro?? for some reason i can NOT get it to work correctly.
how did you get the logic icons to hide and drop down on the top?
Thank for the lesson...just bought the machine. I'm much more comfortable with logic then have the machine do all my arrangement. Question? Can you automate the machine internal plugin in logic automation. It didn't work when I try. Thank if you can help out.
Hey Anthony! great video man thank you very much. I have a question for you. I have done everything said on your tutorial video, but for some reason when i turn my maschine into midi mode it wont sound at all.. do you knkow if there is something else in the sync process?
@03killak Im actually using a mac..I use the maschine mikro and in it are buttons f1-3 on there..I have to hold shift and f1 (has the word midi on top of it) and group E to get it to work..it might be a little different if u have the regular maschine
@03killak yea i did..it worked when I had everything set up to group E. so do everything he says (the whole sound to MIDI notes thing) and then hold down shift, F1, then Group E all at the same time and it should work. I'm trying to get it done to other groups but for now I'm just sticking with this.
GREAT! straight to the point!
great vid man.... i think logic and mashine is a great combo....
Thanks helped me out a lot!
Hey, Great tutorial.
I have an issue though, I open up the maschine software, every pad sounds fine, everything's working right, then I open up logic pro and when i press the pads, there's no sound.
I configure everything how you said, with the groups, I hold shit and control, new template etc. Still no sound from the pads. Everything is set up n logic pro how you explained also.
What's the deal?
Whats going on Tony, quick question did everything you said however where is control on the mikro? I see shift, but where is control?
many thanks, this helped me a lot. PS. you sound kinda like elvis. a maschine tutorial from elvis - rules
Great vid. Sounds to midi notes doesn't work for me though - no sound comes out once I go into MIDI mode on maschine. I can get individual sounds - but the problem is that I cant select a second sound and record that to a separate track on logic. My logic is version 9.0.0... maybe i need update - maschine is current. So far its just easier to drag tracks as audio - not exactly syncing though.
Having followed your instructions, when recording in logic I am not able to hear what I have recorded although it records the notes, it always recorded in another octave for example C-1 instead of C3. (After holing shift F1) I am not able to hear my custom kit when it is in the default template mode.. How do I solve this?
how do you separate group sounds for mixing purposes for this method ( ex. each drums of a drumkit) ?
Thank you! Great tutorial. It works
I have many songs in maschine I want to track into logic, for mixing. How do I accomplish this? Each instrument on its own track.
@LinGwiZtiX How did you do that? I try to record on the drum pad but nothing records, but if i record on my MIDI keyboard it records
SOLUTION on the no-sound-problem: set root note to C -1 (not C 3) when you're in maschine sound midi batch setup
it worked in my case, hope this helps!
what if i wanted each drum sound on seperate instrument tracks for mixing sake?
@letmefookinwatch I'm having this same problem. Everything is set up as in the video. However once I switch to Controller mode (Shift+Ctrl) I get no sound through Logic.
The MIDI notes will still record on the instrument track. But the MIDI will not trigger the Maschine.
I'm pretty sure its a setting or something simple. Trying to find solution. Any suggestions?
@RemSenS912 im having the same problem have you found out how to use your pads?
how would you load up samples into maschine and play them in logic?
this is happening to me too! have I set my midi preferences wrong or something?
did you ever figure out how to fix that?! i just got mine yesterday and have the same problem!
when use maschine as controller for logic, my pads sound so weak, have the bang the pad to get the full sounds... is there a way to set the pads at full velocity?
thanks!
I too have the same question, is it possible to do it in maschine mikro??? I just did everything you did, I get tha sounds to appear on logic_ but they don't record : /.
Wad am I doing wronG?
how do u sync logic x and machine studio?...
Thank you! Fixed my problem!
how could i load my own drum samples that i downloaded in mp3 format.. for ex. i want to add one mp3 kick file and a hi hat and maybe some snares onto the maschine.. how could i do that?
thank you
Thanks, Anthony!!!!
is it possible to do it the same way with maschine mikro?
I got everthing down to a tee except how do you put macschine into midi mode. You said shift and control right? Nothing happens....what am I doing wrong?
great video, when I hit shift and control on my maschine the shift dosent stay lit up and the control button only stays lit up....i just cant seems to record directly into logic...any help thank!!!!
Thank you so much! but, how do i load in different groups? now it seems like it can only take 1 group. Can you help?
Hi Anthony,
When I switch my Mikro to Midi Mode (01 = default) and not "new template". Can you tell me how to swich 01 to "new template"?
@anthonyguitarsav Hi I have logic express 9 and a maschine mikro I am curious and confused when you say "shift + control" to put my maschine in midi mode. If you could go into further detail in a message or comment reply itd be greatly appreciated thanks.
@IZMAYHEM I have this same problem...were you able to fix yours?
hiya dude.. useful video. i am however having an issue.. hopefully you can help.
I've done as the video has shown.. sounds are playing from maschine in logic, but when i switch to midi mode, i get no sounds, but im still able to record the midi notes.
any light you could shed on this would be hugely appreciated.. ta
For some reason I can't open maschine on the instrument track? I can only open it on the inserts. I'm new to Logic but I have ver 9 and I"m using 1.7 maschine. please help.
Hi I did everything as described in the video, but my maschine once i put it into midi mode doesn't play anything (i'm talking about the drum kit using mode).
hi
why Since i turn on Maschine into Midi mode - template 01, nothing is working well
the kit is not display on the pads, there is only one note and very very low note
any help please ?
So when i hit shift F1 on my machine mikro everything works but it seems its stuck in "keyboard mode" i have the same sound on all 16 pads just different pitches... how do i fix this
I am the same way with MIKRO. I can't sync it together. B/C it's USB connected, does this make a difference?
My computer does not show maschine when I attempt to open it while scrolling through all instruments. Any ideas of what I'm doing wrong?
@letmefookinwatch Hoping to find a solution to this as well.
hey, so i did everything you said to do with logic and maschine but im putting my maschine mikro into midi mode and it is recording in logic but i cant here the sounds or instruments!! i put it into midi mode and it says 01 Default, or. 02 Abelton Live. im stuck here and im just on default but i cant here any sounds when i hit my pads! PLEASE HELP ME!!!!!!!
great video i just have one problem when i hit record in logic 9 maschine starts to play its on pre loaded song preset how do i stop that?
Are you using "shift + Control" on the maschine or "shift + ctrl" on your keyboard? And if you have figured it out by now then disregard my comment haha
@IZMAYHEM hey I just found out how to stop the preloaded song...at the bottom left of maschine controller on the screen there's a button that looks like a refresher button...click that and it will clear the preloaded song
when i open logic pro i have audio track opened and cant select maschine to open up? It only has input 1 then when i click that has options to select input 2, 3, 4 etc how do i get maschine to show up so i can select it to open?
wassup bro.. im tryin to record mashine into logic, and use the note repeat and octave changes etc, into logic and its only letting me record whats on pad 1.. for instance.. i setup on pad 1 a kick drum.. on pad 2 a clap.. and on pad 3 a hi hat. but when i press "shift control" to put it in midi mode, its only letting me record the kick and not the clap and hi hit.. help me out please! thanks!
Hey Anthony, i've followed and did everything you said but logic is not responding, im able to record and its recording but no sounds coming out of logic when trying to play what ive recorded, Can you pls help?
when I record it is still recording through the Maschine and not into logic , can you help!?!?!
When I put maschine into midi mode I have no sound?
Logic is not responding to any midi input.. i did all the things you say and i put my maschine in midi-mode and nothing... logic is not responding... i need this pretty bad because im sick of the maschine interface and creating beats in there... i want to get it out into logic... help!?
Y do I only have maschine fx found in the mixer and not wat u have
When I tried that I could not get any sounds then, can you help me out, thanks
Hey so I did everything in logic and maschine and i can hear the pads im hitting but it wont recorded anything on logic please help
HELP! I press record and see a green block signifying recording but no sound! The audio from the Maschine isn't recording. And when I switch to MIDI controller mode (shift + control) I lose sound through logic. I NEED HELP! This is driving me insane!
I would like to give a big thank you to everyone who checked out my tutorial. Also thank you for all the feedback whether good or bad. Sorry if I did not reply to every one's questions or concerns, I never intended to get so many views and comments. It was just a video I wanted to put out to anybody who shared my frustration with the Maschine and Logic Pro setup. In the future I plan to make better and updated videos on similar subjects. Peace out!
@IZMAYHEM I'm having the same problem. no idea what to do
@anthonyguitarsav @thirdmaster I swear that what happened to me right now. Pads work when you turn off the midi mode, but when I, "Shift+Control" all i see is lit notes and no sound...FML
does this work with logic 8 can u answer my question bcuz i see you dontn answer anybody back
man, thank you so much!
Tried this and wasn't able to get Logic to trigger Maschine sounds once hardware was set to MIDI controller mode (Shift+Ctrl). Then watched this video and found a simple solution. Select GROUP E on Maschine controller (in MIDI mode). Once I did this, everything seemed to work accordingly. Try it out. Hopefully this helps.
Yup, same here. Can't hear it at all.
try pressing shift/control an then E in groups
still nothing! any other suggestions. hopefully i did that right
This guy doesn't know his terminology to well "thingys" and "these tabs" still got the job done.
Yup, set noot to C-1 instead of C3 in maschine midi setup and all problems are solved
@letmefookinwatch same problem......
For those of you that can't hear change your root note to c -1
When I record nothing comes up!?
Wow thanks a lot a lot a lot bro' ! :)
haha you're one step ahead of me
Thanks
oh ok cool. you said F1 so im guessing your using pc?
i did everything you said
meh Session raise your weapons.
when you duplicate track you can't record again.