✅Best Crown Molding | Cheap, Light, Flexible | Nomastyl Polystyrene Foam Crown Moulding Review
ฝัง
- เผยแพร่เมื่อ 20 ก.ย. 2019
- ✅➜amzn.to/3nirdNi or ➜ebay.to/2m6KM0J, The best cheap crown molding can be found online and is easy to install yourself. Nomastyl makes an elegant modernized designed polystyrene crown moulding that is easy to paint, cut, and install.
✅Decorative Door Trim ➜ • ✅Best Millwork Crosshe...
Crown moulding can really enhance your home's aesthetic appeal. I have installed wood crown molding over the years and I will now start using high density foam crown moulding from now on. It is cheap and easier to work with not to mention it looks just like wood. You can also buy this crown molding from places like Home Depot or Lowes.
Here are the specs on it:
Internet: 206665560 Model # GP
Nomastyl 1-1/2 in. x 5-1/2 in. x 78-3/4 in. Polystyrene Crown Moulding
High density foam is lightweight and installs with acrylic caulk.
Surface is smooth and crisp for a classic crown appearance.
Choose a custom look by painting any color you wish.
#home
#upgrades
#crownmoulding
#polystyrenecrownmoulding - แนวปฏิบัติและการใช้ชีวิต
![มองหน้ากันไม่ติด (Awkward) - โอ๊ต ปราโมทย์ FEAT. MAIYARAP [Official MV]](http://i.ytimg.com/vi/4b02SY_r6Gw/mqdefault.jpg)
![เบิ้ล ปทุมราช - อ้ายกินดอง น้องลาบงัว ft. สแน็ก อัจฉรีย์ [OFFICIAL MV]](http://i.ytimg.com/vi/-OK--KaSPcI/mqdefault.jpg)
Just so everyone knows, these feel like Styrofoam but there is another type of polystyrene molding by American Pro Decor from home depot that is different, it is a lot harder and feels almost like plastic. I would go with those.
how long does this thing last? I heard some get powder like after some years
Thank you for giving us such a detailed video.
Thanks for watching & for the feedback!
Perfect instructional video 👍🏼
Thank u thank u for this video very very detailed and sooo helpful love it u did and outstanding job 👍🏾
Glad it was helpful and I truly appreciate your feedback! Much thanks!
looks really good actually.. good job
Great review instructional vid, thanks
Glad it was helpful! Thanks for watching!
Looks great
Thanks! Happy New Year!
Thank you for the video.
Thanks for watching!
I think I'm going to try it.
I really enjoyed your video, my apt has no molding until now , should do another followup on do's and don't, seen alot and this is far the best without electrial equipment, thanks
Thank you! Will do!
Great job
Much thanks!
Wow what will they think of next
Love it!!!!
Much thanks!
🍃🕊 Thank You!!!! Sir. My Husband Will be Thrilled with this Product! 🕊🍃 Blessings!
Wonderful!
You said $6-7 a piece but I find them $29.99 or so per length of 78 inches. So you probably used 8 lengths for your kitchen and should have cost you almost $300. Am i correct?
What kind of paint did you use ?
(Water based, polyurethane, etc..?)
Great stuff Sir. Came out very nice. How long did it take you to complete?
It took 2 days but only because I have a day job too. The 1st day was spent cutting, mounting, and filling in seems. The 2nd day consisted of taping off the walls with painters tape and painting the crown moulding with a two coats of white semi gloss Behr premium plus paint.
Do you know if it has any off gassing?
could you please provide the exact link for ordering this as the link is not working for me
Looks great. I bought the same as yours. Really good material. Only problem is i am not able to get the right angle for the corners. Do you have a link where i can buy the angle cutting tool that you have. Thanks.
*Thanks you much! Here is the angle cutting tool ➜**amzn.to/2wKSZgU**.*
Looks awesome dude. Now you just need to do something about those cabinets.
Thanks! I did. This is an older video.
I thought about doing this but the price is crazy at $43 each. Ouch! Great video. I would want to add led lights to the crown mold.
Search “Nomastyl” crown moulding… it’s $9.24 at Home Depot per 6’… that’s $1.42 per foot
We can sell as $1 per inch
I'm thinking of doing this with double tape in an apartment really cool
Nice! Let me know how it turns out.
I use this polystyrene crown molding everywhere as well. It's pricey compared to wood or mdf, but it's lightweight.
I can’t cut with that board. I tried and tried and I never makes a flush cut. What am I doing wrong?
Where did you bought that products
Super helpful video! Kitchen looks great!
Thank you!
I’m trying to find foam molding for tapered dead ends for the top of a fireplace I’m doing. If you can suggest anything that’d be amazing!
Thank you much I appreciate the feedback! Dead ends can be achieved based on your cut. I wish I had a better understanding of your project/layout. There are so many different styles and sizes out there. I buy a bunch of products from Amazon ➜amzn.to/2XzLqCX. You might want to check out Home Depot's website too.
What can be done about the open end of the molding? My living room has an open end doorway. So i can i close the gaps that show on the ends.
You can use caulking or even drywall putty.
My husband has no experience with styrofoam crown molding but he seems to think it would be lower class or quality. Although I'm not sure he's ever had to put it up-maybe once or twice. Is there anything you can tell me here I can relay to him, to demonstrate its possible superiority over wood ? ....And advantages over wood? Are there any possible disadvantages to wood? Less expensive? Looks as great? Lasts as long? Also, if you buy white light weight crown molding, do you still need tol paint it white to make it look finished?
In my opinion I love this stuff. I have worked with wood for years and this styrofoam material is amazing. It is so easy to use, cut, shape, mount, and paint. It is also resistant to mold, mildew, and moisture. Most importantly you don't need a big table saw/angle cutter or nail gun etc. It is a fraction of the cost off wood and last just as long as wood if not longer. Painting it is not required but highly recommend just like with wood crown moulding.
So it is $29.99 a length. Am i correct?
How do i buy the product
I just bought this for my home, did you find the 3m double sided tape made too big of a gap?
The 3M tape worked just fine with minimal gap which would just be filled with caulking. If you want to reduce the gap further more put the 3M tape a few millimeters below the lip of the edge where it can sit in the groove. This allow for a tight flush install.
Can you use this product for crown moulding on cabinets?
very nice how to order
would led light melt it? I want to use it for led crown molding
It would work perfectly with LED accent lights. LEDs run cool and it takes high heat to melt this material.
Any suggestions on how to deal with the shrinking and expanding causing my joints to crack and seperate? Tired of messing with this stuff. Its kept my project at a stand still trying to figure out what would hold. Ive tried caulk, joint compound and now thinking of using an epoxy but not sure if the heat will cause it to melt. Any ideas would be helpful. Thanks.
Adhesive
What did you find helpful? I am about to try staple gun
Do they make chair rail molding?
I'm not sure but I would only use this material in high areas where things can't bang into it.
Any updates on how it’s holding up?
Still this same. I'm so happy with it. Will do a follow vid real soon!
This is my 8 month update ➜th-cam.com/video/FHsPUqXAjLM/w-d-xo.html
How do you call that yellow tool you used for angle cutting?
*It is called a mitre box ➜**amzn.to/3wPxp67**.*
I can
not find the exact one you have...ugh
I would like to know the place of available this material
Any hardware store like lowes just for starters
nice
What paint did you use?
I used this paint ➜amzn.to/359ZpBA and it covers everything nicely in one coat. If you want a bright finish you can go with a hi gloss instead of what I used which was a semi gloss. From my experience it is best to pay for high quality paint so you can get better quality coverage with one coast vs several coats with a mediocre finish.
how long does it last and does it get dirty easily?
They last forever and it does not get dirty easily. To give it a better finish and easy for cleanup it helps to paint it satin, semi gloss or a high gloss finish.
This is my 8 month update ➜th-cam.com/video/FHsPUqXAjLM/w-d-xo.html. I found no issue with it. It still looks as great as day one and it doesn't get dirty.
Wait - your cost was $7.00 per 6 1/2 piece of polystyrene ???
Did u paint it or caulk it or anything
Yes I caulked first then painted 2 coats of semi gloss white paint. You can use semi gloss or high gloss.
@@VibrantDeals do you recommend the caulk over plaster? Should I use both like you
I wasn't sure about these moldings. Your video convinced me. They should pay you for this (if you are not already getting paid (LOL!)
I wasn't sure either until I installed it myself. I have no regrets. Thanks for the feedback and for watching. I'm not paid by the company that makes these but this is my honest review.
*✅Best Foam Crown Molding ➜**amzn.to/3fwv6Kr** or ➜**ebay.to/2m6KM0J*
*✅Decorative Door Trim ➜**th-cam.com/video/nX6T5GUhuyA/w-d-xo.html*
*📌June 13, 2020 Kitchen Update ➜**th-cam.com/video/FHsPUqXAjLM/w-d-xo.html*
Do you have an updated link?
its $29 a piece
I purchased mine from Home Depot. 1-1/2 in. x 5-1/2 in. x 78-3/4 in. Polystyrene Crown Moulding than $8 each
Goodluck to anyone who buys this to find out they have to cope a bunch of inside cuts because of weird angles
toxic i think?
It's crazy that anyone would use this product. A true craftsman would never use this. I've been installing crown for years and recently I tried this product and was horrible to work with. Everyone is just trying to make money no matter if there integrity goes out the door
I think I'll pass. Styrofoam is not high on my choice of building materials. This looks like a product for someone who wants it done and cheep. Not something that will look good for a century.
Please do drop me a message
I believe you can get it from Home Depot's website and look up Nomastyl Crown Moldings. There are similar products on Amazon that I have tried.