ive rewatched and used this exact video almost 4 times now to fix various boot problems i have memorized everything u have said in this video, this is the only solution to all boot problems on YT and there is no doubt about it TY @valiumMedia Tech, AND pls ping my comment so others too realize it
Thank you so much for your nice feedback. 🌹❤️🌺 Undoubtedly, the video helped everyone watched the video to fix all BCD errors, but the positive youtubers like you are rare. So your comment is deserve being Pin on the top of other comments.
The ONLY method that worked out of over 10 different TH-cam videos, including HP. You weren't kidding when you said "exclusive"!! You provided commands none of the others did. Hours and hours of playing with it, refusing to format my drive and having to re-install all those apps, paid off, thanks to you! And, brief and to the point; no rambling video!
Thank you very much for your nice feedback.❤️🌹💛🌷 So, please don't forget to subscribe, as your subscription would be a valuable addition to our channel. Also please mention which method that helps (Automatic or manual method), and what is your system type (MBR or GPT)? Best regards!
Success! After about 20 hours of troubleshooting (and each tutorial leading to discovering a new problem)... Finally, my computer boots normally again.
Its very funny, the fact that i am from brazil, but i speak english a lot . I whatched the video a few times, and a problem that do not appears have solution, now does not exist anymore. Very good content, hugs from Brazil, and thank you friend!
I've had this issue a few times over the years and this is the first time I actually managed to get it fixed without reinstalling everything! Thank you so much!
This video saved the day, and quite possibly many headaches for not only me but my colleagues. Thank you for being the solution to such an specific problem!
I spent whole night looking for a fix and running commands in cmd at advanced options but all in vein. Only this method worked wonders for me where i was least expecting. You are a hero brother may you have all the happines and wealth and health in life.
Great video. I tried other "solutions" with no joy. These step by step instructions SOLVED my boot partition issue after I had cloned my HDD to SSD. Thank you so much.
After half a dozen tutorial this is the only one that worked. Cloning 500gb Kingston to 2tb EVO Pro using Macrium. Error 0xc0000225 resolved! Thank you!
Amazing I search like 9 hours to fix my computer boot and didn't find the same solution untill this video shows up and I finally fix it , thank you very much brother 👍 You are amazing
Ran into this problem after cloning my HDD to a new NVMe, and Windows couldn't boot properly. This tutorial helped me completely fix the problem! Thanks alot! Now onto upgrading to my new Ryzen 5700x and B550 motherboard! :D
Thank you, you're a life saver after my laptop failed to boot after migrating my data from HDD to SSD in GPT system. It worked like charm and my access to Windows is now restored.
I have a little additional tip for those with the same problem, you should check your boot settings in your BIOS, make sure it is only booting using Legacy, because I have tried all the ways but it turns out that my boot was still default so all the ways did not work.
Dude, i just wanna leave my thanks here.. i watched alot of videos. noone is as good as you, and that's 100% fact. you know how it works. keep it up. wish you would bless us with a video on how to install Android OS systems without issues. i think you will do greatness, i still didn't find a channel capable to do so. please start with Phoenix os DarkMatter. much thanks and respect to your work.
Thank you very much for your nice and motivated comment. Positive TH-camrs like you are rare. I will try to include android and Linux OS to my plan in future.
I fixed my PC using part of this method and a bootable windows installation USB instead of the files from this vid. (For GPT type HD) TL;DR deleted system part then used windows installation tool to rebuild it and my original windows was restored with no loss. I had done the first steps a few times in various attempts to fix without downloading the extra files so when it came time to do the whole process I accidentally skipped that part of assigning the SYSTEM volume a letter before doing the DEL PART OVERRIDE step. Then when I ran the VM file it didn't work and I was stuck again. I then followed steps to restore the system part as follows: 1) Create an installation media 2) Boot PC with an installation media 3) Press SHFIT + F10 on the first screen to bring up Command Prompt 4) Run the following commands and click Enter each time at Command Prompt: diskpart list disk select disk N (N refers to the disk which contains the deleted the EFI System partition) list partition create partition efi format quick fs=fat32 list partition list volume (find the volume letter which belongs to the installed Windows OS) exit (exit diskpart) bcdboot M:\windows (M refers to the volume letter of installed Windows OS) After this I restarted and got a different blue screen error, restarted again and windows did a little update by itself then loaded into windows and everything was restored! Even the excel sheet I had open when my PC died 2 weeks earlier was still open/recovered.
@@ValiumMediaTech The only thing I had to do different was to copy the "vmtechs.gpt" folder and not have the files "loose" in C: otherwise the txt file wasn't found when running the cmd file. Could it be because of line 13 in the script? DISKPART /S "%OSDRIVE%:\VMTechs.GPT\VMTechs.net.txt"
You just saved my failed attempt at cloning one m.2ssd to another. I guess something got corrupted in the boot files when i was cloning with macrium reflect, i was pretty worried about losing everything and thought i'd have to do a fresh windows install but nope, found your video and was saved. Thank you!
@@ValiumMediaTech It's GPT. I got it to work, I tried the same thing again and again and it ended up working the 4th time for some reason. Thanks anyways for the reply.
@@ValiumMediaTech now I'm facing another issue, it does not boot into windows anymore. When I go into the uefi the windows boot manager is missing. Should I redo all the steps in this video?
ive still got error in bootrec /fixmbr, still the system cannot find the filr specified. bootrec /fixboot , still the system cant find file specified. what i have to do? please any suggests?
What does it mean if my disk (in this case an ssd) has a GPT scheme but the system partition has a folder called "boot" as it would be in an MBR scheme? Is there a problem with that?
Hello, can i ask you something, i already followed your steps in the gpt system section, and when i create efi partition there is message that there is new steps not shown on the video, The recovery environtment should be enabled after formatting the efi partition and you have to assign a letter for recovery and all other partitions before pressing any key to continue. My question is how do i do that?
There is another script file that can rebuild the BCD and enable Recovery Environment automatically. Watch the following video to see how to do that and then tell me the result: th-cam.com/video/oQcFjr6laeo/w-d-xo.html
Still having an issue, and it seems the CMD Batch for MBR you provided just threw a ton of errors; "New steps NOT shown in video", something about "Windows Recovery needs a letter assigned before pressing a key to continue" and still got the "Requested system device could not be found" with the "bootrec /RebuildBCD" command that was done by the batch. I checked the link you provided but the steps are the same so I guess I'm completely ******. I Just need a way to completely rebuild the system partition (which is completely missing). After turning on the laptop, it doesn't even get to a Windows error, BIOS isn't seeing an OS which makes sense since the System Volume has vanished. Any help would be greatly appreciated, I could even Paypal you, I can't afford to lose all my programs.
I not have system recovery partition to delete or to create the bcd boot on i only have c and my primary volume that i use as my daily and i can create one cause i on mbr someeone answer me
this fixed the blue screen problem but when It opened my laptop, my ssd was missing. my system and windows was in the SSD previously and after following your instructions, it fixed the blue screen but maybe removed may ssd. is there something I did wrong? please help, I want to retrieve my files
Maybe you have a windows OS installed in your another hard disk and you have rebuilt the BCD to open windows from it. To see if your SSD connected, press windows logo + X keys from keyboard and then select *Disk Management* option.
@@ValiumMediaTech Hi! Thanks for replying. The SSD is still connected and seems that it has no issues. I still have folders and apps that were from the SSD but I cannot open it since it shows "Error Location". I just don't know if there was no file loss. The SSD doesn't show up in the "My Computer" tab. In Disk Management, it doesn't have a letter assigned to it, if I try to assign drive letter and path, it shows the error message "The operation failed because the disk management console is not up-to-date....". Is there any way I can fix this? I really want to get my files back.
@@kenjohnmac4841 Try to assign letters using DISKPART as followings: 1- Run CMD as administrator 2- Type the following commands: DISKPART LIST DISK 3- If the SSD order number is 1, Select it using this command: SEL DIS 1 (If the SSD number is 0, select it using (SEL DIS 0) instead 4- Show SSD partitions using these commands: LIS PART LIS VOL 5- Select the partition that you want to assign a letter for it using this command (e.g. to assign a letter to partition number 3): SEL PART 3 or SEL VOL 3 6- Assign a free letter that is not being used by another partition using this command: ASSIGN LETTER=M
@@ValiumMediaTech I did this and I see my SSD(Disk0) in partition 3 out of 4 partitions as a Primary Type. I followed your instructions and the last part where I assign a letter showed "there is no volume specified, please select a volume and try again" In the Volume list, my ssd which has 475GB is not present, only the HDD and 2 other (below1GB) volumes. BTW, my volumes start at Volume 2, and then 3, 4. No 0 and 1 volumes. Just saying Incase this means something. What can I do about this? Thank you for replying, sorry if I reply late since I have my midterms.
@@kenjohnmac4841 Maybe the SSD is disconnected or disabled from BIOS settings. If not, you may need to disconnect your HDD from motherboard and then boot With SSD only. If the PC booted, then you can rebuild the BCD and then boot into desktop, after that, shut down the PC and reconnect the HDD again.
I'm getting a error after choosing yes the error says "Entry Point Not Found " and after closing tabs running "bootrec /rebuildbcd" it shows 1 installation in G drive and ask for adding installation and after entering "y" it says system cannot find specified path but "bcdedit" command runs.
Hello, when i try to use the command BOOTREC /FIXBOOT on my MBR windows partition it says Access denied. Also when i use the command BCDBOOT C:\WINDOWS says error while copying files. All of this when I already did everything you said
Did you have a system partition that contains a BCD file? If yes, delete it as instructed on the video and then run the automatic CMD file to rebuild BCD. If not helped, I can send you another automatic bat to rebuild BCD automatically with less manual actions.
@@ValiumMediaTech Yeah i had, i think. I installed an ssd with windows 2days ago and saw a tutorial of how to fix something and one of the steps were to format a unit, but maybe i deleted the hard drive or smth, cause i dont find my files. Thanks anyways for the help, I'll reinstall windows and recover the data with software. Thanks for your help, really. You gained a sub.
@@ValiumMediaTech I fixed it, the problem is that my disk was in raw data cause windows update broke smth or idk, but i downloaded miniwindows on my usb and used the command chkdsk /f e: and fixed it without data lost. Anyways, i really appreciate your help and thanks for support. :D
I'm not sure if this is my issue. I updated windows 11 now I am locked out, no methods have worked in the repair utility, either unavailable or just restarts when selecting an option. I have windows 10 still on a separate internal SSD. Is there a way I can fix the issue manually while logged into windows 10? I can still see all the files on my windows 11 NVMe ssd. I need this fixed asap for work. Thank you!
What is your blue screen error message and error code? You can try to boot rom the windows 10 SSD, just to see if the issue is related to windows 11 if the computer booted successfully, or if it is related to hardware issue if the computer failed to boot. Also the following videos may help you: th-cam.com/video/lwgIdutkPek/w-d-xo.html th-cam.com/video/oQcFjr6laeo/w-d-xo.html th-cam.com/video/eWY0l9bEDHA/w-d-xo.html
You're the man! I spent much time on KB and videos, you saved me the life. I appreciate it. Just a comment in my side, I omitted to create the system (V) partition with your txt file because I got errors. I removed it and deleted lines about this process. Finally I was able to fix the boot issue. Just as feedback, I did a image backup from easeus utility and didn't work properly, but good more time thank you.
Maybe the boot and/or system files are corrupted, so try to repair you system as instructed on this video: th-cam.com/video/eWY0l9bEDHA/w-d-xo.html If not helped, you may need to reinstall windows.
@@ValiumMediaTech thanks 👍. I am trying to fix via USB method. When I try to do " assign letters to partition", blue cmd screen comes, executes "Diskpart" command, some std info about Microsoft Diskpart version, copyright comes and after that, on next line cursor just keeps blinking. Its at this stage for last 45min now. Plz advise.
@@saurabhyadav-jq4wd Sorry for the late reply. In some cases, pressing Enter again can fix such issue, however, if this issue not fixed, it may indicate a hard disk corruption.
@@ValiumMediaTech Thanks 👍. chkdsk was getting stuck only it's drives, so I detached it from laptop. SSD is primary drive for me. Booted via USB method, ran bcdedit but boot file was not found. Formatted a hidden volume which was lying empty. Copied bcd files from c drive to this drive via cmd steps here th-cam.com/video/VKuAPqRHKB0/w-d-xo.htmlsi=BdlyclJXA3VDcg5u. And at least now I can boot via my SSD. So many thanks for guiding with steps. :) Now, can you please advise how to fix my HDD? It appears as local disk but does not open. Earlier it was not the case since I could see files via cmd notepad method, but I know now that I might have ran some cmd commands that have caused issues. Chkdsk command just remains stuck for these drives.
Here is an update: I ran chkdsk once on that drive, and some what few things are fixed. But drive is still not accessible 😕. I can see the content of that HDD via cmd only I still get error drive is not accessible 😭 Plz advise
@@ValiumMediaTech I'm truly grateful my bro. Can I ask you bro ?my laptop keeps booting at hp window infinity and it keeps saying bcd error at startup Windows 10, I tried to rebuild bcd and it was successful but it keeps repeating the same error and can't boot into Windows. What should I do bro.
@@dygahacker1219 If you still get a BCD error, then try to rebuild the BCD from scratch using this new method: th-cam.com/video/oQcFjr6laeo/w-d-xo.html But make sure that there is no more than one EFI partition.
Hi, I tried the method for GPT and cannot run the batch, now I haven't the boot partition and have an eternal "preparing automatic repair" loop, help please
maybe a better question. 1. could I have put boot file and manager on both the system reserve and windows drive C and they are conflicting? 2. should both reserve and main drive be active? currently (see last comment below) my reserve I just recreated is empty amd looking to build boot in there. I have rebuilt it once via someone instructions but still got path not found that is when I did your two videos which deleted the reserve and as I said made new partition. been at it for a few weeks now.. thanks.
ok.. using your BCD application it deleted my system reserve but did not build a new one. I ran your program but it failed. so I created a new partition off my drive C (100MB) I then ran your create BCD hoping it would create the boot file in the reserve but it see's my BCD file on the win 10 media disk ( USB) so I hit no on deleting it and the program exits. so how do I create the new reserve with the boot files? it is empty right now. my windows is on C. Thanks
Recognizing what are you doing and what the tool do is a good thing that indicates you will succeed in fixing your issue by yourself. NOW, try this new tool from this video to rebuild the BCD: th-cam.com/video/oQcFjr6laeo/w-d-xo.html Let me know if it helped or not.
Sir, I followed all of your steps for the automatic recreation of the boot partition. However, when I right-click on your batch file using notepad, as described, I do not get the the option to run as administrator. Do you have an explanation for this?
@ValiumMediaTech thank you for replying !!! Possibly.. But I dont believe so. The usb flash drive is 256 gb. Also, I don't see any other partitions. Is there a way to make the others show ? I've been struggling for 2 full days and am out of options..
@ValiumMediaTech So I got it !!! I was using the wrong disk drive. I kept using C: when it was actually D: . Now I got to the step where it is in recovery mode. I press enter to try again, and screen turns black, then sends me back to this screen. Ive tried hitting f4 then 4 for safe mode. Again screen turns black and sends me back to the recovery screen with error 0xc0000001.
My computer had issues when updating to windows 11, but I’m pretty sure it’s windows 10 right now. At 7:50 I deleted the system. Copy and pasted the gpt files you provided where windows and user file is under (D:\) for me (although I see another windows and user file under (H:\) as well. Only did it for (D:\) so far. So I changed the txt file to D, since that’s where the windows and user is. And ran your program as administrator. Then I got Virtual Disk Service error: the specified shrink size is too big and will cause the volume to be smaller than the minimum volume size. Bootrec /fixmbr (completed successfully) Bootsect /nt60 sys /force (target volumes will be updated with bootmgr compatible boot code.) The system partition was not found: The requested system device cannot be found. D:\>bootrec /fixboot (element not found) Bootrec /rebuildbcd (identified 2 Windows installations) 1) D:\ Windows - 2) H:\ Windows I push y for both then Element not found. It all started with windows update and I got error code 0xc0000001. Been watching your videos for days but I’m running out of options and really don’t want to lose my files like anyone with this issue. I hope you can help somehow, thanks for your videos either way.
Additional info, I had the * sign under gpt in disk 0 (D:/) so I’m pretty sure I’m using the right file you gave (gpt). However the mentioned (H:/) is in disk 1 with no *.
Seems your windows is on the H partition and not on the D partition. If that is true, you need to use MBR, because the H is located on an MBR disk as stated in your reply to your comment. To confirm that the H is your windows partition, open USERS folder and look at the profile name (according to the folders names in the main menu of the USERS folder). The profile name is your name that appear in login screen when you are trying to login into desktop. You may need to remove the V partition that was created when running GPT file as administrator (if exist), after that execute the MBR file the rebuild your BCD, but you need to confirm that the H is your Windows partition first.
Thank you for the quick reply. Just want to confirm after I show you this video. th-cam.com/video/Cwk9qKGMWcQ/w-d-xo.html How do I see if v partition is there or not? I’m not too sure what to do after. Download the mbr and copy paste, and run as administrator on the H:/?
Update: the main issue I think is that the system partition is not being created with your commands. When the shrink command is applied, it comes with “virtual disk service error…the specified shrink size is too big” Been trying to look for guide to fix that in cmd but it’s looking like I’m reaching a dead end. If you got any ideas for a fix, that’s awesome but it’s looking like this great journey is finally coming to an end. Hope to never find myself around here again but good luck to everyone on the same journey.
Sorry for the late reply, but you already have a System partition which is the N that appears in the list of volumes. But the strange thing is that you have two windows partitions with the same Username (Stiffy). Have you cloned the disk from the D to the H or from the H to the D? The suggestion now is to do the followings: 1- Execute the following commands to see in which disk does the N Volume belong to: DISKPART SEL VOL 3 LIST DISK You will see an asterisk (*) before the disk that has the N partition to indicate that the disk is the selected one. 2- If the disk 0 is the selected one, then the D is your default windows partition, so you will need to use the GPT file to rebuild the BCD. 3- If the disk 1 is the selected one, then the H is your default windows partition and you have to use the MBR file to rebuild the BCD. 4- Before running either GPT or MBR files: a- You have to permanently remove some files (using Shift + Delete keys from keyboard) from either the D or the H partition to allow at least 1 gigabytes free space on that partition. b- Delete the N volume using these commands: SEL VOL 3 DEL VOL OVERRIDE c- But before deletion, make sure that the volume number 3 is the same volume that appear on your video (i.e. the size is 100 mb, and it has "System Reserved" label). D- When you asked to type Yes or no to add the identified windows path to the BCD, type yes or Y only for the windows that you have identified on step number 2 or thee, and type No or N for the other disk. For example if you have identified that the N partition belong to the disk number 0, then you have to type Yes for the D partition and to type No for the H partition.
Thanks. Save me tons of time. However, I have encountered two error while using the mbr script, first one is there is some hidden character in the beginning of the file which makes the command failed. I manually copied the content to a new file solve this issue. The second issue is the for loop at the beginning of the script, as my system has more than one disks that have the windows installed. One of the disk match the for loop and OSDrive variable has value. So the script won't go to the MainPath. I execute all commands manually to solve this issue. So may I know what is the for loop used in the script?
First, many thanks for your nice comment. In relation to script error, you can watch the new video if you still need it: th-cam.com/video/oQcFjr6laeo/w-d-xo.html I relation to For Loop, it's used to search for specific files in all partitions, so the partition that contains that file, is identified as the OSDrive or whatever.
nice video but I cannot recover my gpt system. You give step-by-step instructions for mbr disk then blast through gpt in like 5 seconds! I cannot figure out wtf to do. I definately have windows on my e: disk and I can get to the efi partition. That partition has a boot folder a msi folder and microsoft folder both with their own boot folders. I am confused as fusk as to what I am supposed to do? Everytime I try bootrec /fixmbr or /fixboot or rebuild I get cannot find specified files. I have windows on two disks but can only boot off one of them. I am assuming I want to point the efi boot to the windows partition on the e: drive? That is the drive that is failing. Anyway it would be nice if you split this into TWO videos. One for MBR and one for GPT because the way they are in this I cannot sort out one procedure from the other!!!
If you are sure that you have detect the Boot o EFI partition, then you can delete it and then recreate it and rebuild BCD automatically as on this video: th-cam.com/video/BEftZevGKcw/w-d-xo.html Watch the part that is related to rebuilding the BCD.
I am getting srttrail.txt windows 10 error and my windows is keep looping unable to open safe mode and pc reset option is also not available in troubleshoot - advance option I have try all the solution of available on TH-cam. If you have make any tutorial on this how to fix it please share your video link
I was actually reading through a lot of comments and found someone with the same issue. You directed them to another one of your other videos th-cam.com/video/oQcFjr6laeo/w-d-xo.htmlsi=9kLI2GTkmlRdsaNX and it worked I appreciate you making these videos they are informative and I actually learned alot. Thank you very much
Hi... Im not entirely sure if i should try this. Bcdedit shows my windows partition, however it cannot boot into desktop. It alwsys try to do a repair after BSOD stop code : registry error. I tried fixboot but also get access denied. Just wondering if this is a boot loader issue or corrupted registry issue. Should i just try anyways? Thanks in advance.
As the stop code state, your problem is related to registry and not related to BCD. So you can watch this video to see hoe to fix your registry problem: th-cam.com/video/BEftZevGKcw/w-d-xo.html
It means you have to be able to identify whether your disk scheme has a GPT or MBR in order to be able to select the applicable solution from the next parts of the video.
hi my system is gpt but it showing that i have in c drive both Boot and EFI, then the selected partition is the system partition.and the most recent was boot....how is this possible is there a work around thanks
After i follow your steps, it get an blue screen error like you after download the mbr.. i press enter and it still stuck in the blue screen.. should i need a recovery tool?
@@wanggamink7068 What is the error message that is associated with 0xc00000e error code ? Because this error code 0xc00000e may caused by HDD or SSD corruption in addition to BCD corruption.
@@wanggamink7068You can need it in the following situations: - If you are unable to boot into windows recovery Environment - If there is a missing system file that need to be replaced from installation media. - If you want to install a fresh copy of windows into your computer.
@@ValiumMediaTech all my files r there if I boot from a hirenCD … all I did Was swap the sdd to hdd and when I put it back all this things popped Crystal says the 1yr old sdd is healthy
Try the automatic method if not helped, try the followings: 1- Download this file and extract it into a USB drive bit.ly/3pX1YqN 2- Connect the USB into your computer 3- Assign a free letters to ALL volumes that has no assigned letters 4- Open the USB drive and then open the VMTechsBCD folder "using Notepad method" 5- Change "File of types" to "All" 6- Right click on "Auto-Rebuild-BCD-By-VMTechs" file and then select "Run as Administrator" 7- Tell me if it succeeded in rebuilding the BCD or take a screenshot for the error if happen.
hello i tried your file for my gpt system. Bat file seems to run ok no errors but when windows 10 try to start i always get BSOD and error 0xc000021a. Do you have maybe som idea what could be problem?
@@martinm8380 First of all: Take a screenshot for your blue screen error and upload it to this website: paste.pics/ after that post the link in new comment.
Hi! I got a problem on the last step, it said "the boot configuration data store could not be opened" and "the requested system device cannot be found". what should I do about this?
@@mickaelamenguito2689 1- Do you have a GPT or MBR system? 2- Do you have a windows partition (the C or D partition or whatever, but not the X partition)? 3- Do you have enough free disk space on the windows partition? 4- You can take a screenshot for your screen and upload it to paste.pics/ , after that post its link in new comment so I can try to help you.
@@mickaelamenguito2689 Onekey can be used to restore your system If you still need help. please try the suggested method from the video and then upload a screenshot for the error message so we can help you.
My diskpart is kinda different and i dont know what to do... i have found the disk, its 0, ok list part... partition 1 | Reserved 16mb partition 2 | Primary 476gb List vol... The only vol with 100mb is the vol 3 | fat 32 (No label, is blank) and the Info is Hidden... Do you know how can i activate and follow your steps? Thank you!
@@ValiumMediaTech The new one! As my scenario was different from this video, your batch probably covered all scenarios, i think! What I also did was change the Display port, because after everything was successfully completed, I had the windows logo and then I lost signal, then I changed the port and voila
after following all the steps without error when i continue with windows again the screen shows boot device not found install an operating system on your hard disk. Can you please guide mefrom here
This error may indicate that you have not rebuilt the BCD correctly, or maybe the widows partition and/or windows files are missing or corrupted. So try to rebuild the BCD again using the new auto batch as instructed on this video: th-cam.com/video/oQcFjr6laeo/w-d-xo.html If not helped, then watch this video to see how to fix that: th-cam.com/video/gwF7MKAylqQ/w-d-xo.html
You have to create a bootable USB in your mobile, and then boot from that USB. Watch the following video to see how to create a bootable USB using android mobile: th-cam.com/video/VftmUgeRJa8/w-d-xo.html Watch this video to see how to boot into advanced recovery environment: th-cam.com/video/3STO5fXy5KA/w-d-xo.html
You have to create a bootable USB in your mobile, and then boot from that USB. Watch the following video to see how to create a bootable USB using android mobile: th-cam.com/video/VftmUgeRJa8/w-d-xo.html Watch this video to see how to boot into advanced recovery environment: th-cam.com/video/3STO5fXy5KA/w-d-xo.html
After doing everything like in video now i cant boot in Windows like before and Linux as well I double checked everything I was doing. How do I fix it now?
When I typed list disk, it says no fixed disks to show, also when I typed notepad to monitor for the mouse!! Pleas help I need to do interviews and I can't, it will cost me 100 $ to fix the laptop 😢
Diskpart give an error: the remote procedure call failed. See the system event log for more information. As without recovery usb I get recovery needed errors.
@@ValiumMediaTech it is GPT and i thinking it might be the new update windows release. after i choose install and shut down, that might had made this issue. so I'm not install the new update at the moment.
@@umarazmat Windows update didn't affect the BCD, but the registry and or WinSxS files may be corrupted if you shutdown your PC during Updates. Watch this video to fix your issue: th-cam.com/video/jHS1V3oEgFQ/w-d-xo.html
*x:\Sources* indicates that you are booting from a bootable USB or another external drive. *x:\windows\system32* indicates that you are booting without the bootable external drive (USB, DVD, ...)
First, the correct command is LIST DISK not LISTDISK. Secondly: If you get that error message while typing the correct command, that mean your hard disk is either corrupted or not connected to its socket correctly.
@@ValiumMediaTech yup, tried the correct cmd actually but this still shows, so if its corrupted, what can I do (pretty sure its connected correctly, cant assume tho
@@iiKhaled0 If corrupted, you have to replace it with new one, as there is no way to repair it if the computer not recognize it. But before replacing it, you can try to review or reset the BIOS settings to see if the hard drive disabled from there.
- Did you have an intact windows partition with all windows files?; If yes, did you added it to the text file as instructed on the video? - What is the type of your disk scheme, and which method that you have used to fix your issue ?
the gpt : after run as adminstaor...showimg, the recovery environment should be after formating the EFI partition. echo you have to assiign a letter for recovery and all other partitions before pressing any key to continue
If the error is related to BCD, then rebuilding BCD will fix your issue. But if there is another error source, then you have to fix it first. The following videos may help you: th-cam.com/video/oQcFjr6laeo/w-d-xo.html th-cam.com/video/eWY0l9bEDHA/w-d-xo.html
@@gayipiu2960 If you mean, you think you my lose your files after applying the suggestions correctly, I can say that nothing will be lost, unless you mistakenly select a wrong partition. You can also watch this new video: th-cam.com/video/oQcFjr6laeo/w-d-xo.html
![Repairing Windows Boot Partition and Boot Files | [Resolved] bootrec fixboot access denied](http://i.ytimg.com/vi/WC4lDgpud1Y/mqdefault.jpg)
ive rewatched and used this exact video almost 4 times now to fix various boot problems i have memorized everything u have said in this video, this is the only solution to all boot problems on YT and there is no doubt about it TY @valiumMedia Tech, AND pls ping my comment so others too realize it
Thank you so much for your nice feedback. 🌹❤️🌺
Undoubtedly, the video helped everyone watched the video to fix all BCD errors, but the positive youtubers like you are rare.
So your comment is deserve being Pin on the top of other comments.
I get error bootsect /nt60 sys . The system
partition was not found. Any help thank
you
@@rootsdat Try this:
bootsect /nt60 ALL
Can anyone help me , I didnt understand the video completely
I normally block "robot" videos, but this one covers everything and gave me a step I was missing. So top marks
The ONLY method that worked out of over 10 different TH-cam videos, including HP. You weren't kidding when you said "exclusive"!! You provided commands none of the others did. Hours and hours of playing with it, refusing to format my drive and having to re-install all those apps, paid off, thanks to you! And, brief and to the point; no rambling video!
Thank you very much for your nice feedback.❤️🌹💛🌷
So, please don't forget to subscribe, as your subscription would be a valuable addition to our channel.
Also please mention which method that helps (Automatic or manual method), and what is your system type (MBR or GPT)?
Best regards!
@@ValiumMediaTech Subscribed. I used Manual method and it is MBR. Thanks.
@@musiccollector Thank you again for your subscription and for feedback.
Success! After about 20 hours of troubleshooting (and each tutorial leading to discovering a new problem)... Finally, my computer boots normally again.
Thank you so much for your feedback!
Its very funny, the fact that i am from brazil, but i speak english a lot . I whatched the video a few times, and a problem that do not appears have solution, now does not exist anymore. Very good content, hugs from Brazil, and thank you friend!
Thanks for sharing!
Don't forget to subscribe! ❤❤🌹
@@ValiumMediaTech already subscribed!
@@brucamc Thank you!
I've had this issue a few times over the years and this is the first time I actually managed to get it fixed without reinstalling everything! Thank you so much!
Thank you very much for the nice and motivating comment! ❤🌹
This video saved the day, and quite possibly many headaches for not only me but my colleagues.
Thank you for being the solution to such an specific problem!
Thank you too for your amazing feedback!
Don't forget to subscribe and tell your colleagues to subscribe too! ❤❤🌹
I spent whole night looking for a fix and running commands in cmd at advanced options but all in vein. Only this method worked wonders for me where i was least expecting. You are a hero brother may you have all the happines and wealth and health in life.
Thank you so much for your nice feedback!
you lifesaver. Thanks a lot, my dad's Notebook almost died
You are welcome!
Great video. I tried other "solutions" with no joy. These step by step instructions SOLVED my boot partition issue after I had cloned my HDD to SSD. Thank you so much.
Thank you too for your nice feedback!
Don't forget to subscribe! ❤❤🌹
After half a dozen tutorial this is the only one that worked. Cloning 500gb Kingston to 2tb EVO Pro using Macrium. Error 0xc0000225 resolved! Thank you!
Thank you too for your nice feedback.
Don't forget to subscribe! ❤❤🌹
Amazing I search like 9 hours to fix my computer boot and didn't find the same solution untill this video shows up and I finally fix it , thank you very much brother 👍
You are amazing
Thank you for your nice comment!
Glad I could help
00:45 Was te fix for me! Thanks!!
You are welcome!
Thanks.
Note: Anybody having this problem with a laptop without a mouse. Right click (to run as administrator) is CTRL+SHIFT+F10.
Thanks
Ran into this problem after cloning my HDD to a new NVMe, and Windows couldn't boot properly.
This tutorial helped me completely fix the problem! Thanks alot! Now onto upgrading to my new Ryzen 5700x and B550 motherboard! :D
Thank you too for your nice feedback!
thanks a million bud. this is the only video on youtube that works. cant thank you enough
You're very welcome!
Many thanks for your nice feedback❤️🌹
Glad I could help
I have been working on this problem since yesterday and just found your video now and my problem is solved. Thank you
Great to hear!
THANK YOU SO MUCH IDK WHAT THE OTHERS ARE SAYING BUT THIS WORKED FLAWLESSLY
Thank you too for your positive feedback!
Don't forget to subscribe! ❤❤🌹
Thank you, you're a life saver after my laptop failed to boot after migrating my data from HDD to SSD in GPT system. It worked like charm and my access to Windows is now restored.
Thank you too for your nice feedback 🌹❤️
I have a little additional tip for those with the same problem, you should check your boot settings in your BIOS, make sure it is only booting using Legacy, because I have tried all the ways but it turns out that my boot was still default so all the ways did not work.
Thanks for your addition!
This worked for me thank you
Boom you helped me fix it! You showed me a step I missed by running BCDBOOT C:\WINDOWS and that fixed it!
Thanks for your feedback!
Dude, i just wanna leave my thanks here.. i watched alot of videos. noone is as good as you, and that's 100% fact. you know how it works. keep it up. wish you would bless us with a video on how to install Android OS systems without issues. i think you will do greatness, i still didn't find a channel capable to do so. please start with Phoenix os DarkMatter. much thanks and respect to your work.
Thank you very much for your nice and motivated comment. Positive TH-camrs like you are rare.
I will try to include android and Linux OS to my plan in future.
@@ValiumMediaTech Thanks man, you're the best. Please don't be late, i see you took 3 months to post an update haha. We want more of your nice work
@@desperadoyard2352 I will; Thank you again for your valuable advice! 🌹😊❤
I fixed my PC using part of this method and a bootable windows installation USB instead of the files from this vid. (For GPT type HD)
TL;DR deleted system part then used windows installation tool to rebuild it and my original windows was restored with no loss.
I had done the first steps a few times in various attempts to fix without downloading the extra files so when it came time to do the whole process I accidentally skipped that part of assigning the SYSTEM volume a letter before doing the DEL PART OVERRIDE step. Then when I ran the VM file it didn't work and I was stuck again.
I then followed steps to restore the system part as follows:
1) Create an installation media
2) Boot PC with an installation media
3) Press SHFIT + F10 on the first screen to bring up Command Prompt
4) Run the following commands and click Enter each time at Command Prompt:
diskpart
list disk
select disk N (N refers to the disk which contains the deleted the EFI System partition)
list partition
create partition efi
format quick fs=fat32
list partition
list volume (find the volume letter which belongs to the installed Windows OS)
exit (exit diskpart)
bcdboot M:\windows (M refers to the volume letter of installed Windows OS)
After this I restarted and got a different blue screen error, restarted again and windows did a little update by itself then loaded into windows and everything was restored! Even the excel sheet I had open when my PC died 2 weeks earlier was still open/recovered.
Thanks for your addition!
I'm getting error, failure when attempting to copy boot file
3:50 Gives me error: Volume in drive M has no label.
It contain DIR EFI!
What to do next after this step?
Watch this video:
th-cam.com/video/XYS_Ul8aSvs/w-d-xo.html
Man .... You deserve my like!
I appreciate that!
Broooo.. life saver! You've gained my sub.
Thank you for your nice comment and for sub!
@@ValiumMediaTech The only thing I had to do different was to copy the "vmtechs.gpt" folder and not have the files "loose" in C: otherwise the txt file wasn't found when running the cmd file. Could it be because of line 13 in the script? DISKPART /S "%OSDRIVE%:\VMTechs.GPT\VMTechs.net.txt"
Thanks! "BCDBOOT" already did the trick and was not mentioden anywhere else.
You are welcome!
I used the GPT path and this worked well. Was a bit fast for me. lol But that is a me thing. Nice work and thank you for the help!
You're welcome!
And thank you for your nice feedback❤️🌹
Thank you so much. I finally was able to start my laptop without deleting any thing.
Thank you too for your feedback!
Wowowoowow... Really 1000% work..thanks man you save my life😍🥰😍
You are so welcome❤❤
Don't forget to subscribe! ❤❤🌹
Thanks you so much dude.... I've had a same problem and then when I watch your video my problems had fixed
#sorry for bad English bro
Glad to hear that
Don't forget to subscribe! ❤❤🌹
You just saved my failed attempt at cloning one m.2ssd to another. I guess something got corrupted in the boot files when i was cloning with macrium reflect, i was pretty worried about losing everything and thought i'd have to do a fresh windows install but nope, found your video and was saved. Thank you!
Thank you too for your nice feedback!
I am not a fucking bot this video legit saved my computer from me having to wipe it clean to try to install windows again!!! 🎉 thank you
You are most welcome!
I tried using the gpt method, when i execute these commands at 8:53 and type y, i get the error failure when attempting to copy boot files. Pls help
Is your system GPT or MBR?
Please upload a screenshot for the error to paste.pics/ , after that, post the link in new comment so I can help you.
@@ValiumMediaTech It's GPT. I got it to work, I tried the same thing again and again and it ended up working the 4th time for some reason. Thanks anyways for the reply.
@@ValiumMediaTech now I'm facing another issue, it does not boot into windows anymore. When I go into the uefi the windows boot manager is missing. Should I redo all the steps in this video?
@@karthikt5789 Yes, try it again.
@@ValiumMediaTech okay
The only method that Works
Thank you 🙏.
You're welcome!
You saved my Windows 11, thank you 👏🏻👏🏻👏🏻👏🏻👏🏻
Enjoy
Leandro, salvou mesmo? Por algum motivo o meu Win 11 não funciona
@@jgamerbr21 Como podemos te ajudar?
Thanks a lot, your tutorial helped to solve my problem after migrating ssd from old pc MBR to new computer with EFI.
Thank you too for your nice feedback!
Glad to hear that
ive still got error in bootrec /fixmbr, still the system cannot find the filr specified. bootrec /fixboot , still the system cant find file specified. what i have to do? please any suggests?
- Is your windows folder exist?
- Do you have a GPT or MBR?
- Which method that have you tried, manual or automatic?
What does it mean if my disk (in this case an ssd) has a GPT scheme but the system partition has a folder called "boot" as it would be in an MBR scheme? Is there a problem with that?
Nvm I checked out your recent video about this issue and solved the problem, but my files got deleted lol. Thank you, I guess.
You are Welcome!
BCDBOOT C: \WINDOWS saved my life bro tytyty
Thanks for your feedback!
Don't forget to subscribe! ❤❤🌹
at 3:48, the gpt one, the sel part would be 5? or 4? i'm confused, as volume 4 lists Drive F as Videos
Watch this video:
th-cam.com/video/oQcFjr6laeo/w-d-xo.html
Tu video me salvó la vida, mil gracias❤
¡Gracias también por tus comentarios!
Hello, can i ask you something, i already followed your steps in the gpt system section, and when i create efi partition there is message that there is new steps not shown on the video, The recovery environtment should be enabled after formatting the efi partition and you have to assign a letter for recovery and all other partitions before pressing any key to continue. My question is how do i do that?
Oh wait, i found something. When adding installation to boot list. It answered "the requested system device cannot be found"
There is another script file that can rebuild the BCD and enable Recovery Environment automatically. Watch the following video to see how to do that and then tell me the result:
th-cam.com/video/oQcFjr6laeo/w-d-xo.html
@@ValiumMediaTech It worked, thank you so much. Thank for your fast response and your detailed videos, I hope you have a great day and happy new year
Still having an issue, and it seems the CMD Batch for MBR you provided just threw a ton of errors; "New steps NOT shown in video", something about "Windows Recovery needs a letter assigned before pressing a key to continue" and still got the "Requested system device could not be found" with the "bootrec /RebuildBCD" command that was done by the batch. I checked the link you provided but the steps are the same so I guess I'm completely ******. I Just need a way to completely rebuild the system partition (which is completely missing). After turning on the laptop, it doesn't even get to a Windows error, BIOS isn't seeing an OS which makes sense since the System Volume has vanished. Any help would be greatly appreciated, I could even Paypal you, I can't afford to lose all my programs.
Execute the following commands and then send me a screenshot for the result:
DISKPART
LIST DISK
LIST VOL
Send me another screenshot or upload a video to your channel for the result of each of these commands:
BCDEDIT
DIR /A C:\
DIR /A E:\
You save me, thanks a lot ❤
Glad it helped!
Don't forget to subscribe! ❤❤🌹
I not have system recovery partition to delete or to create the bcd boot on i only have c and my primary volume that i use as my daily and i can create one cause i on mbr someeone answer me
If you are sure that there is no System partition, you can create one automatically as shown on this video:
th-cam.com/video/oQcFjr6laeo/w-d-xo.html
@@ValiumMediaTech i mbr with efi partition I don't know how when I create a new one it said efi only for gpt
Works!! Thanks so much!!
Glad it helped!
this fixed the blue screen problem but when It opened my laptop, my ssd was missing.
my system and windows was in the SSD previously and after following your instructions, it fixed the blue screen but maybe removed may ssd.
is there something I did wrong? please help, I want to retrieve my files
Maybe you have a windows OS installed in your another hard disk and you have rebuilt the BCD to open windows from it.
To see if your SSD connected, press windows logo + X keys from keyboard and then select *Disk Management* option.
@@ValiumMediaTech Hi! Thanks for replying.
The SSD is still connected and seems that it has no issues. I still have folders and apps that were from the SSD but I cannot open it since it shows "Error Location". I just don't know if there was no file loss. The SSD doesn't show up in the "My Computer" tab.
In Disk Management, it doesn't have a letter assigned to it, if I try to assign drive letter and path, it shows the error message "The operation failed because the disk management console is not up-to-date....".
Is there any way I can fix this? I really want to get my files back.
@@kenjohnmac4841 Try to assign letters using DISKPART as followings:
1- Run CMD as administrator
2- Type the following commands:
DISKPART
LIST DISK
3- If the SSD order number is 1, Select it using this command:
SEL DIS 1
(If the SSD number is 0, select it using (SEL DIS 0) instead
4- Show SSD partitions using these commands:
LIS PART
LIS VOL
5- Select the partition that you want to assign a letter for it using this command (e.g. to assign a letter to partition number 3):
SEL PART 3
or
SEL VOL 3
6- Assign a free letter that is not being used by another partition using this command:
ASSIGN LETTER=M
@@ValiumMediaTech
I did this and I see my SSD(Disk0) in partition 3 out of 4 partitions as a Primary Type.
I followed your instructions and the last part where I assign a letter showed "there is no volume specified, please select a volume and try again"
In the Volume list, my ssd which has 475GB is not present, only the HDD and 2 other (below1GB) volumes. BTW, my volumes start at Volume 2, and then 3, 4. No 0 and 1 volumes. Just saying Incase this means something.
What can I do about this?
Thank you for replying, sorry if I reply late since I have my midterms.
@@kenjohnmac4841 Maybe the SSD is disconnected or disabled from BIOS settings. If not, you may need to disconnect your HDD from motherboard and then boot With SSD only. If the PC booted, then you can rebuild the BCD and then boot into desktop, after that, shut down the PC and reconnect the HDD again.
He did it broooo simple and efficient
Thanks for feedback!
Don't forget to subscribe! ❤❤🌹
I'm getting a error after choosing yes the error says "Entry Point Not Found " and after closing tabs running
"bootrec /rebuildbcd" it shows 1 installation in G drive and ask for adding installation and after entering "y" it says system cannot find specified path but "bcdedit" command runs.
Try this video:
th-cam.com/video/oQcFjr6laeo/w-d-xo.html
Hello, when i try to use the command BOOTREC /FIXBOOT on my MBR windows partition it says Access denied.
Also when i use the command BCDBOOT C:\WINDOWS says error while copying files.
All of this when I already did everything you said
Did you have a system partition that contains a BCD file?
If yes, delete it as instructed on the video and then run the automatic CMD file to rebuild BCD.
If not helped, I can send you another automatic bat to rebuild BCD automatically with less manual actions.
@@ValiumMediaTech Yeah i had, i think.
I installed an ssd with windows 2days ago and saw a tutorial of how to fix something and one of the steps were to format a unit, but maybe i deleted the hard drive or smth, cause i dont find my files. Thanks anyways for the help, I'll reinstall windows and recover the data with software.
Thanks for your help, really. You gained a sub.
Good luck 👍
@@ValiumMediaTech I fixed it, the problem is that my disk was in raw data cause windows update broke smth or idk, but i downloaded miniwindows on my usb and used the command chkdsk /f e: and fixed it without data lost.
Anyways, i really appreciate your help and thanks for support. :D
@@zdarky_6623 Thank you again for the additional information.
Its showing "There are no fixed disks to show" when I enter List Disk what do? 4:19
I'm not sure if this is my issue. I updated windows 11 now I am locked out, no methods have worked in the repair utility, either unavailable or just restarts when selecting an option. I have windows 10 still on a separate internal SSD. Is there a way I can fix the issue manually while logged into windows 10? I can still see all the files on my windows 11 NVMe ssd. I need this fixed asap for work. Thank you!
What is your blue screen error message and error code?
You can try to boot rom the windows 10 SSD, just to see if the issue is related to windows 11 if the computer booted successfully, or if it is related to hardware issue if the computer failed to boot.
Also the following videos may help you:
th-cam.com/video/lwgIdutkPek/w-d-xo.html
th-cam.com/video/oQcFjr6laeo/w-d-xo.html
th-cam.com/video/eWY0l9bEDHA/w-d-xo.html
At 8:57 I still find "The system cannot find the file specified" instead of "completed successfully"
Please help I'm working on this since 2 days
th-cam.com/video/kSb7H73q--Y/w-d-xo.html this video of yours fixed my laptop. I have no words to thank you.
You are most welcome!
And thank you for your nice feedback.
You're the man!
I spent much time on KB and videos, you saved me the life. I appreciate it.
Just a comment in my side, I omitted to create the system (V) partition with your txt file because I got errors. I removed it and deleted lines about this process. Finally I was able to fix the boot issue.
Just as feedback, I did a image backup from easeus utility and didn't work properly, but good more time thank you.
Thank you so much for your nice comment and feedback.
Also you can watch the updated method from this link:
th-cam.com/video/oQcFjr6laeo/w-d-xo.html
Thanks man you are a lifesaver
Happy to help!
Hi, great video, but I have a question
Does this method install anything on the pc? Is there a risk of viruses?
Nothing will be installed into your PC, and its 100% safe.
After doing yes on "add installation to boot list", getting error - the file or directory is corrupted and unreadable
How to fix it?
Maybe the boot and/or system files are corrupted, so try to repair you system as instructed on this video:
th-cam.com/video/eWY0l9bEDHA/w-d-xo.html
If not helped, you may need to reinstall windows.
@@ValiumMediaTech thanks 👍. I am trying to fix via USB method. When I try to do " assign letters to partition", blue cmd screen comes, executes "Diskpart" command, some std info about Microsoft Diskpart version, copyright comes and after that, on next line cursor just keeps blinking. Its at this stage for last 45min now.
Plz advise.
@@saurabhyadav-jq4wd Sorry for the late reply.
In some cases, pressing Enter again can fix such issue, however, if this issue not fixed, it may indicate a hard disk corruption.
@@ValiumMediaTech Thanks 👍. chkdsk was getting stuck only it's drives, so I detached it from laptop. SSD is primary drive for me. Booted via USB method, ran bcdedit but boot file was not found. Formatted a hidden volume which was lying empty. Copied bcd files from c drive to this drive via cmd steps here th-cam.com/video/VKuAPqRHKB0/w-d-xo.htmlsi=BdlyclJXA3VDcg5u. And at least now I can boot via my SSD. So many thanks for guiding with steps. :)
Now, can you please advise how to fix my HDD? It appears as local disk but does not open. Earlier it was not the case since I could see files via cmd notepad method, but I know now that I might have ran some cmd commands that have caused issues. Chkdsk command just remains stuck for these drives.
Here is an update: I ran chkdsk once on that drive, and some what few things are fixed. But drive is still not accessible 😕. I can see the content of that HDD via cmd only
I still get error drive is not accessible 😭
Plz advise
Thank you very much bro you helped me create my lost win bootmgr
Glad to hear that!
Don't forget to subscribe! ❤❤🌹
@@ValiumMediaTech I'm truly grateful my bro. Can I ask you bro ?my laptop keeps booting at hp window infinity and it keeps saying bcd error at startup Windows 10, I tried to rebuild bcd and it was successful but it keeps repeating the same error and can't boot into Windows. What should I do bro.
@@dygahacker1219 If you still get a BCD error, then try to rebuild the BCD from scratch using this new method:
th-cam.com/video/oQcFjr6laeo/w-d-xo.html
But make sure that there is no more than one EFI partition.
@@ValiumMediaTech thank you very much let me try it and I will give you feedback
@@dygahacker1219 Ok.
Hi, I tried the method for GPT and cannot run the batch, now I haven't the boot partition and have an eternal "preparing automatic repair" loop, help please
Try this video to rebuild the BCD automatically according to your disk scheme:
th-cam.com/video/oQcFjr6laeo/w-d-xo.html
maybe a better question. 1. could I have put boot file and manager on both the system reserve and windows drive C and they are conflicting? 2. should both reserve and main drive be active? currently (see last comment below) my reserve I just recreated is empty amd looking to build boot in there. I have rebuilt it once via someone instructions but still got path not found that is when I did your two videos which deleted the reserve and as I said made new partition. been at it for a few weeks now.. thanks.
Remove the created partition and then try this new video:
th-cam.com/video/oQcFjr6laeo/w-d-xo.html
I did remove partition but your auto file still sees the USB win 10 media boot files and asked to delete it. I say no and it ends @@ValiumMediaTech
@@Wiscwin1 - Copy the auto file to the C or another partition, disconnect the USB and the try again.
ok.. using your BCD application it deleted my system reserve but did not build a new one. I ran your program but it failed. so I created a new partition off my drive C (100MB) I then ran your create BCD hoping it would create the boot file in the reserve but it see's my BCD file on the win 10 media disk ( USB) so I hit no on deleting it and the program exits. so how do I create the new reserve with the boot files? it is empty right now. my windows is on C. Thanks
Recognizing what are you doing and what the tool do is a good thing that indicates you will succeed in fixing your issue by yourself. NOW, try this new tool from this video to rebuild the BCD:
th-cam.com/video/oQcFjr6laeo/w-d-xo.html
Let me know if it helped or not.
Sir, I followed all of your steps for the automatic recreation of the boot partition. However, when I right-click on your batch file using notepad, as described, I do not get the the option to run as administrator. Do you have an explanation for this?
Seem you are trying to run a wrong file, maybe a text file or another extension file.
What if under partition , it only shows 1 and the size is 32gb? It shows no other partition
Maybe you have selected the external USB drive.
@ValiumMediaTech thank you for replying !!! Possibly.. But I dont believe so. The usb flash drive is 256 gb. Also, I don't see any other partitions. Is there a way to make the others show ? I've been struggling for 2 full days and am out of options..
@@jordymarquez4052
Try these:
DISKPART
LIST DISK
LIST VOL
@@ValiumMediaTech okay let me give it a shot
@ValiumMediaTech So I got it !!! I was using the wrong disk drive. I kept using C: when it was actually D: . Now I got to the step where it is in recovery mode. I press enter to try again, and screen turns black, then sends me back to this screen. Ive tried hitting f4 then 4 for safe mode. Again screen turns black and sends me back to the recovery screen with error 0xc0000001.
My computer had issues when updating to windows 11, but I’m pretty sure it’s windows 10 right now.
At 7:50 I deleted the system. Copy and pasted the gpt files you provided where windows and user file is under (D:\) for me (although I see another windows and user file under (H:\) as well. Only did it for (D:\) so far.
So I changed the txt file to D, since that’s where the windows and user is. And ran your program as administrator. Then I got
Virtual Disk Service error: the specified shrink size is too big and will cause the volume to be smaller than the minimum volume size.
Bootrec /fixmbr (completed successfully)
Bootsect /nt60 sys /force (target volumes will be updated with bootmgr compatible boot code.)
The system partition was not found: The requested system device cannot be found.
D:\>bootrec /fixboot (element not found)
Bootrec /rebuildbcd (identified 2 Windows installations)
1) D:\ Windows - 2) H:\ Windows
I push y for both then
Element not found.
It all started with windows update and I got error code 0xc0000001. Been watching your videos for days but I’m running out of options and really don’t want to lose my files like anyone with this issue. I hope you can help somehow, thanks for your videos either way.
Additional info, I had the * sign under gpt in disk 0 (D:/) so I’m pretty sure I’m using the right file you gave (gpt). However the mentioned (H:/) is in disk 1 with no *.
Seems your windows is on the H partition and not on the D partition. If that is true, you need to use MBR, because the H is located on an MBR disk as stated in your reply to your comment.
To confirm that the H is your windows partition, open USERS folder and look at the profile name (according to the folders names in the main menu of the USERS folder). The profile name is your name that appear in login screen when you are trying to login into desktop.
You may need to remove the V partition that was created when running GPT file as administrator (if exist), after that execute the MBR file the rebuild your BCD, but you need to confirm that the H is your Windows partition first.
Thank you for the quick reply. Just want to confirm after I show you this video.
th-cam.com/video/Cwk9qKGMWcQ/w-d-xo.html
How do I see if v partition is there or not? I’m not too sure what to do after. Download the mbr and copy paste, and run as administrator on the H:/?
Update: the main issue I think is that the system partition is not being created with your commands.
When the shrink command is applied, it comes with “virtual disk service error…the specified shrink size is too big”
Been trying to look for guide to fix that in cmd but it’s looking like I’m reaching a dead end.
If you got any ideas for a fix, that’s awesome but it’s looking like this great journey is finally coming to an end.
Hope to never find myself around here again but good luck to everyone on the same journey.
Sorry for the late reply, but you already have a System partition which is the N that appears in the list of volumes.
But the strange thing is that you have two windows partitions with the same Username (Stiffy). Have you cloned the disk from the D to the H or from the H to the D?
The suggestion now is to do the followings:
1- Execute the following commands to see in which disk does the N Volume belong to:
DISKPART
SEL VOL 3
LIST DISK
You will see an asterisk (*) before the disk that has the N partition to indicate that the disk is the selected one.
2- If the disk 0 is the selected one, then the D is your default windows partition, so you will need to use the GPT file to rebuild the BCD.
3- If the disk 1 is the selected one, then the H is your default windows partition and you have to use the MBR file to rebuild the BCD.
4- Before running either GPT or MBR files:
a- You have to permanently remove some files (using Shift + Delete keys from keyboard) from either the D or the H partition to allow at least 1 gigabytes free space on that partition.
b- Delete the N volume using these commands:
SEL VOL 3
DEL VOL OVERRIDE
c- But before deletion, make sure that the volume number 3 is the same volume that appear on your video (i.e. the size is 100 mb, and it has "System Reserved" label).
D- When you asked to type Yes or no to add the identified windows path to the BCD, type yes or Y only for the windows that you have identified on step number 2 or thee, and type No or N for the other disk. For example if you have identified that the N partition belong to the disk number 0, then you have to type Yes for the D partition and to type No for the H partition.
Thanks. Save me tons of time.
However, I have encountered two error while using the mbr script, first one is there is some hidden character in the beginning of the file which makes the command failed. I manually copied the content to a new file solve this issue.
The second issue is the for loop at the beginning of the script, as my system has more than one disks that have the windows installed. One of the disk match the for loop and OSDrive variable has value. So the script won't go to the MainPath. I execute all commands manually to solve this issue.
So may I know what is the for loop used in the script?
First, many thanks for your nice comment.
In relation to script error, you can watch the new video if you still need it: th-cam.com/video/oQcFjr6laeo/w-d-xo.html
I relation to For Loop, it's used to search for specific files in all partitions, so the partition that contains that file, is identified as the OSDrive or whatever.
nice video but I cannot recover my gpt system. You give step-by-step instructions for mbr disk then blast through gpt in like 5 seconds! I cannot figure out wtf to do. I definately have windows on my e: disk and I can get to the efi partition. That partition has a boot folder a msi folder and microsoft folder both with their own boot folders. I am confused as fusk as to what I am supposed to do? Everytime I try bootrec /fixmbr or /fixboot or rebuild I get cannot find specified files. I have windows on two disks but can only boot off one of them. I am assuming I want to point the efi boot to the windows partition on the e: drive? That is the drive that is failing. Anyway it would be nice if you split this into TWO videos. One for MBR and one for GPT because the way they are in this I cannot sort out one procedure from the other!!!
If you are sure that you have detect the Boot o EFI partition, then you can delete it and then recreate it and rebuild BCD automatically as on this video:
th-cam.com/video/BEftZevGKcw/w-d-xo.html
Watch the part that is related to rebuilding the BCD.
I am getting srttrail.txt windows 10 error and my windows is keep looping unable to open safe mode and pc reset option is also not available in troubleshoot - advance option I have try all the solution of available on TH-cam. If you have make any tutorial on this how to fix it please share your video link
th-cam.com/video/1SJr5aSDCE8/w-d-xo.html
After the bootsect /nt60 sys /force it says the system partition was not found. Do you have any advise for this?
I was actually reading through a lot of comments and found someone with the same issue. You directed them to another one of your other videos th-cam.com/video/oQcFjr6laeo/w-d-xo.htmlsi=9kLI2GTkmlRdsaNX and it worked I appreciate you making these videos they are informative and I actually learned alot. Thank you very much
Use this command instead:
bootsect /nt60 All
Or watch this video:
th-cam.com/video/oQcFjr6laeo/w-d-xo.html
Hi... Im not entirely sure if i should try this. Bcdedit shows my windows partition, however it cannot boot into desktop. It alwsys try to do a repair after BSOD stop code : registry error. I tried fixboot but also get access denied. Just wondering if this is a boot loader issue or corrupted registry issue. Should i just try anyways? Thanks in advance.
As the stop code state, your problem is related to registry and not related to BCD. So you can watch this video to see hoe to fix your registry problem:
th-cam.com/video/BEftZevGKcw/w-d-xo.html
Bless your soul. This worked perfectly!
Nice work!
What do you mean at 4:00 I don’t what solutions I am able too use ?
It means you have to be able to identify whether your disk scheme has a GPT or MBR in order to be able to select the applicable solution from the next parts of the video.
hi my system is gpt but it showing that i have in c drive both Boot and EFI, then the selected partition is the system partition.and the most recent was boot....how is this possible is there a work around
thanks
If you are sure that there is no separated EFI partition, then open the video starting at 08:01 and follow instructions to rebuild the BCD correctly.
@@ValiumMediaTech it didnt work still getting a bunch or errors after i run the script
@@ValiumMediaTech its auto put s v: but i labelled it as d:\windows " /s u:
After i follow your steps, it get an blue screen error like you after download the mbr.. i press enter and it still stuck in the blue screen.. should i need a recovery tool?
What is your blue screen error?
@@ValiumMediaTech the error code is 0xc00000e.
@@wanggamink7068 What is the error message that is associated with 0xc00000e error code ?
Because this error code 0xc00000e may caused by HDD or SSD corruption in addition to BCD corruption.
@@ValiumMediaTech so.. am i need a recovery tool from USB or disk or something else?
@@wanggamink7068You can need it in the following situations:
- If you are unable to boot into windows recovery Environment
- If there is a missing system file that need to be replaced from installation media.
- If you want to install a fresh copy of windows into your computer.
I reformated and recreated the efi a couple of times still cannot boot
If the EFI recreated successfully, then you have to search for other source for your issue rather than the BCD.
@@ValiumMediaTech all my files r there if I boot from a hirenCD … all I did Was swap the sdd to hdd and when I put it back all this things popped Crystal says the 1yr old sdd is healthy
I’m getting the error after bcdboot “c:\windows” /s V:, failure when initializing library system volume. Any help?
Try the automatic method
if not helped, try the followings:
1- Download this file and extract it into a USB drive
bit.ly/3pX1YqN
2- Connect the USB into your computer
3- Assign a free letters to ALL volumes that has no assigned letters
4- Open the USB drive and then open the VMTechsBCD folder "using Notepad method"
5- Change "File of types" to "All"
6- Right click on "Auto-Rebuild-BCD-By-VMTechs" file and then select "Run as Administrator"
7- Tell me if it succeeded in rebuilding the BCD or take a screenshot for the error if happen.
hello i tried your file for my gpt system. Bat file seems to run ok no errors but when windows 10 try to start i always get BSOD and error 0xc000021a. Do you have maybe som idea what could be problem?
Is the error message state that the Boot Configuration Data or BCD file is corrupted or missed or you have another error message?
@@ValiumMediaTech No error message just this code 0xc000021a and then computer power off
But when I try manually bootrec /fixboot I get message access is denied
@@martinm8380 First of all: Take a screenshot for your blue screen error and upload it to this website: paste.pics/ after that post the link in new comment.
@@ValiumMediaTech i did but my comments get deleted . why?
Hi! I got a problem on the last step, it said "the boot configuration data store could not be opened" and "the requested system device cannot be found". what should I do about this?
it also said "failure when attempting to copy boot files"
@@mickaelamenguito2689 1- Do you have a GPT or MBR system?
2- Do you have a windows partition (the C or D partition or whatever, but not the X partition)?
3- Do you have enough free disk space on the windows partition?
4- You can take a screenshot for your screen and upload it to paste.pics/ , after that post its link in new comment so I can try to help you.
It is a GPT system and it has the D partition, however when I restart my laptop, it shows the onekey recovery instead.
@@mickaelamenguito2689 Onekey can be used to restore your system
If you still need help. please try the suggested method from the video and then upload a screenshot for the error message so we can help you.
My diskpart is kinda different and i dont know what to do...
i have found the disk, its 0, ok
list part...
partition 1 | Reserved 16mb
partition 2 | Primary 476gb
List vol...
The only vol with 100mb is the vol 3 | fat 32 (No label, is blank) and the Info is Hidden...
Do you know how can i activate and follow your steps? Thank you!
Watch this new video:
th-cam.com/video/oQcFjr6laeo/w-d-xo.html
@@ValiumMediaTech Excelent bro! Works like a charm, thank you so much. I'm subscribing right now
@@jhonathanviana2230 Thank you for the nice comment and for Sub;
Which method that works for you? from this video or from the new one ?
@@ValiumMediaTech The new one! As my scenario was different from this video, your batch probably covered all scenarios, i think!
What I also did was change the Display port, because after everything was successfully completed, I had the windows logo and then I lost signal, then I changed the port and voila
@@jhonathanviana2230 Thank you again!
Enjoy!❤🌹
after following all the steps without error when i continue with windows again the screen shows boot device not found install an operating system on your hard disk. Can you please guide mefrom here
This error may indicate that you have not rebuilt the BCD correctly, or maybe the widows partition and/or windows files are missing or corrupted.
So try to rebuild the BCD again using the new auto batch as instructed on this video:
th-cam.com/video/oQcFjr6laeo/w-d-xo.html
If not helped, then watch this video to see how to fix that:
th-cam.com/video/gwF7MKAylqQ/w-d-xo.html
@@ValiumMediaTech but how can I open cmd when the screen only show this error
You have to create a bootable USB in your mobile, and then boot from that USB.
Watch the following video to see how to create a bootable USB using android mobile:
th-cam.com/video/VftmUgeRJa8/w-d-xo.html
Watch this video to see how to boot into advanced recovery environment:
th-cam.com/video/3STO5fXy5KA/w-d-xo.html
You have to create a bootable USB in your mobile, and then boot from that USB.
Watch the following video to see how to create a bootable USB using android mobile:
th-cam.com/video/VftmUgeRJa8/w-d-xo.html
Watch this video to see how to boot into advanced recovery environment:
th-cam.com/video/3STO5fXy5KA/w-d-xo.html
@@ValiumMediaTech my laptop came with a pre installed windows 10, so can't I use that do I need a usb boot?
Thank you so much!!
You're welcome!
Don't forget to subscribe! ❤❤🌹
Many thanks! ❤ Seriously
Thank you too for your comment!
I can't pass the bootsect
t60 sys part.
It says : system partition not found
Try this video:
th-cam.com/video/oQcFjr6laeo/w-d-xo.html
bro..i have downloaded the windows10 in usb ....can u help me to fix "element not found" in gpt system..the active is not working when i tried...
Try the new automatic bat file from this video:
th-cam.com/video/oQcFjr6laeo/w-d-xo.html
After doing everything like in video now i cant boot in Windows like before and Linux as well I double checked everything I was doing.
How do I fix it now?
What is your error code and error message?
@@ValiumMediaTechi managed to repair everything. I appreciate your willing to help me
@@ciasteczkox Ok!
No problem!
Still there read no specified device. After 2:13 nothing worked because i can't use My main disk
So replace your disk to fix your issue.
My only problem is successfully scanned windows installation /the request system device cannot be found
Did you watched this video?
th-cam.com/video/oQcFjr6laeo/w-d-xo.html
When I typed list disk, it says no fixed disks to show, also when I typed notepad to monitor for the mouse!! Pleas help I need to do interviews and I can't, it will cost me 100 $ to fix the laptop 😢
Maybe the hard disk is corrupted or not connected to motherboard correctly.
Diskpart give an error: the remote procedure call failed. See the system event log for more information.
As without recovery usb I get recovery needed errors.
Which method you have used and what is your disk scheme (GPT or MBR)?
@@ValiumMediaTech it is GPT and i thinking it might be the new update windows release.
after i choose install and shut down, that might had made this issue.
so I'm not install the new update at the moment.
@@umarazmat Windows update didn't affect the BCD, but the registry and or WinSxS files may be corrupted if you shutdown your PC during Updates.
Watch this video to fix your issue:
th-cam.com/video/jHS1V3oEgFQ/w-d-xo.html
@@ValiumMediaTech thx but it got worst so i had no choice but to format all the drive except my storage drive D and install windows as fresh again
@@umarazmat Good luck!
Hi. How did u get x:\Sources? Mine is x:\windows\system32
*x:\Sources* indicates that you are booting from a bootable USB or another external drive.
*x:\windows\system32* indicates that you are booting without the bootable external drive (USB, DVD, ...)
@@ValiumMediaTech thanks for the reply. Much appreciated!
You are most welcome!@@kyawkyawtv949
running "LISTDISK" on diskpart, it says "there are no fixed disks to show"
First, the correct command is LIST DISK not LISTDISK.
Secondly: If you get that error message while typing the correct command, that mean your hard disk is either corrupted or not connected to its socket correctly.
@@ValiumMediaTech yup, tried the correct cmd actually but this still shows, so if its corrupted, what can I do (pretty sure its connected correctly, cant assume tho
@@iiKhaled0 If corrupted, you have to replace it with new one, as there is no way to repair it if the computer not recognize it. But before replacing it, you can try to review or reset the BIOS settings to see if the hard drive disabled from there.
I get error bootsect /nt60 sys . The system
partition was not found. Any help thank
you
- Did you have an intact windows partition with all windows files?; If yes, did you added it to the text file as instructed on the video?
- What is the type of your disk scheme, and which method that you have used to fix your issue ?
what if the local disk wont open in notepad? do you have any solution of that?
Appreciate the help. Wondering if there is a way we could do without needing to download any files? Thanks
Tell me what is the error message or error code that you are trying to fix so I can try to help you
im having boot issue but when i do disk part it says there are no disks
Please type the entire result in a new comment.
the gpt : after run as adminstaor...showimg, the recovery environment should be after formating the EFI partition. echo you have to assiign a letter for recovery and all other partitions before pressing any key to continue
So add any letter for all unassigned partitions, or watch this new video:
th-cam.com/video/oQcFjr6laeo/w-d-xo.html
Hi, tried this but got blue screen with error code 0xc000000f. Please help
If the error is related to BCD, then rebuilding BCD will fix your issue. But if there is another error source, then you have to fix it first. The following videos may help you:
th-cam.com/video/oQcFjr6laeo/w-d-xo.html
th-cam.com/video/eWY0l9bEDHA/w-d-xo.html
My question is if i lost all or reboot after do this?
Lost what???
@@ValiumMediaTech like files, gaming data, etc,images
@@gayipiu2960 If you mean, you think you my lose your files after applying the suggestions correctly, I can say that nothing will be lost, unless you mistakenly select a wrong partition.
You can also watch this new video:
th-cam.com/video/oQcFjr6laeo/w-d-xo.html
@@ValiumMediaTech ok bro, thanks a lot ❤️
@@gayipiu2960 You are welcome!
Don't forget to subscribe! ❤❤🌹
Thank you so much 😭❤️❤️❤️
You are welcome! 😊😊❤❤
Thanks for saving my drive
Happy to help!
Don't forget to subscribe! ❤❤🌹