1970s CG High Breeze 48" Ceiling fan Restoration | AFW |
ฝัง
- เผยแพร่เมื่อ 20 ธ.ค. 2022
- In this video, I am doing a small restoration of this Crompton Greaves High Breeze fan from 1970s.
Repairs I done in this fan :-
Replaced both the bearings ( HCH RS 6202 lower cover & 6203 upper cover)
paint : Asian paints apcolite premium enamel : Blazing white.
spray paint : pure white
Hope you guys like this video!!
Don't forget to comment!!
Thank you for watching.
Nice job bro. Dualtone color looks good. Great to see u realised the truth this 70's HB gives better airflow than Silent Pro enso & some atomshit. My favourite Crompton Greaves fan is this 1970's HB as it's my 1st CG fan from my childhood, still running nicely in my home & the most attractive CG fan in the entire market until now. Even 80's hb is waste looking fan honestly but 70's the King.
Kings of CG are 70's HB, CA, DA, HS, new & old DA, Aura, HSD, Avancer, Jura, A360 with hs blade☺️.
No other companies can defeat these products. ❤️
Thank you bro!😊💖And yes the air flow is just marvelous!! even more than SPEnso BLDC. There will be at least one HB in every Indian homes. HB is not only A great fan, its a memory for coming generations. All the fans you have mentioned are just marvelous and they are simply awesome just like HB. No one can defeat Crompton Crompton Greaves. These fans will run forever, maybe it will outlive the owner. From 80s 0.00001% cost cutting happened maybe but still best in class!!
@@antiquefanworld1728HB is an emotion
Nice 👌 how much do these fan weigh?
Are they very heavy?
Yes they are! Weight is nearly 6-7 Kg
@@antiquefanworld1728 nice thanks for replying
Your welcome!
Perfect!
Thank you bro!
@@antiquefanworld1728 welcome
Awesome video...70s hb was the best. But 1980s onwards the hb variants didn't do any justice to their names
Correct bro!
@@antiquefanworld1728 check out my latest video
Nice job
Thank you Bro!! 🥂
I got 1989 Usha Kohinoor super deluxe,which is also double ball bearing,went for bearing replacement as bearings were making noises while operating,the fan is getting ready to be used in summer season
That's good! Usha Kohinoor is a very good air mover! nice that you are replacing both the bearings. In 70s and 80s, both Crompton Usha had nice airflow with their 18p motor which leaded to wide and high blade angle causing tremendous amount of air flow. But in 90s and 2000s, they ended up with less blade angle and not sufficient for summers. But Crompton found a solution in which Speed = airflow and its Crompton High speed!
In the 90's still Usha pulsar used to blow a lot of air due to wider blades,later it was the usual thing which continuing since 2006 after Jay engineering works died.and my fan is from 1989,period of last years of legends given by Usha,which later reduced, actually that plastic golden medallion broke,i fixed it using fevikwik.
Yes. Usha was still better in 90s time and Crompton was doing some experiment with thin 16pole stator. And obviously the legends where produced between 70s to late 80s. Usha had 4 blade variant of Kohinoor and there is one in my area with a 90s dec air.
Don't forget to make restoration video on your Usha fan. Currently I am finding Gec Toofan and Usha deluxe 50s - 60s model.
Hmmm,Usha deluxe is hard to find but i wish you all the best for that,in our area also there are many legends like late 80's early 90's Crompton Greaves high breeze 42",early 90's Crompton Greaves high breeze 36",1960's Usha popular,1980's Usha prima mkII,late 70's Orient deluxe,1990's-2000's dec airs and a lot more as the apartment is 20+ years old
Please try crompton high speed ceiling fan 1200mm in brown color soon.
I don't have any spot to hang the fan but will buy in future, maybe an HS decora.
@@antiquefanworld1728 I don't have HS decora.
There is a proper way to open the motor. The electrician didn't do right by Damaging it. Anyways restoration is fair enough.
The bearings were Hell! tight on the shaft. The windings were not disturbed by the screwdriver while opening and now every things perfectly fine and no cracks too! just a small dent on lower cover's bulging part due to hammering because off tight bottom bearing.
Now the fan is awesome and trouble free for another coming decades!
In 90s usha fans were fantastic. Now brand is good?
In 90s Usha was good but in 2000s, the Jai Engineering works got closed which was the main factory where Usha fans were made. Now Usha is making fans from vendors and quality is decreased. I am having a 2019 Usha fan which is working perfectly till date.
@@antiquefanworld1728 now which brand is good. How is orient brand?
@@naheedimtiyaz3809 Orient is bad now. fan quality is worse . Better to buy Crompton or Havells.
@@antiquefanworld1728 Thanks
Your Welcome!