Vromo Gata when i was a kid my older generation cousin used to take me for a ride, i couldn’t wait for parents to visit my uncles house . Plus hoping my cousin was there also so he can take me for a ride.. now i relived it with my children
@@grknikolaki that feeling man you unearthed was really nice and bitter at the same time no joke. Thanks again bud. If you're in Az Tucson ever we can ride together... Thanks again take care.
My dad would do that with me when I was helping him with my wrench skills and my late husband did the same my son's ..you my friend are a wonderful father you are I'll be taking my bike out this Thursday 👍💯🇺🇸👍
@@haleyraven.lilrocket9241 awesome.. leaving tomorrow after work. Goin to Laconia NH for bike week.. you have nice videos, but i think you should video that bike with you on it.. lol.. enjoy the freedom
Hi, did you felt by removing the baffles it needed a tuning? Lost power? have a 2019 fatboy not sure if to remove the baffles or spend 400 on slipons seems to pricey and i like how the stock ones look just hate the sound.
Federico Rodriguez Honestly I drove around maybe 80 miles without baffles until my full exhaust arrived. Didn’t want to drive around with the stock noise mufflers... but it was loud and eat up lots of fuel .. i think it out been best to tune also.. i took a chance.. Speak to a mechanic to give you better outcome or result
Yeah but I've been there too trying to do anything to customize a bike that's how you learn sweet bike just curious how does it handle around the turns about 70 miles per hour my friend's got a breakout and with the larger Tire, how does it handle in and out traffic
thats not a lolly pop the thunder monster baffle in constructed of a section of exhaust tubeing cupling that inserts inside the muffer that has a 1/4 in flat washer fabricated on a stem in the middle that has a 1/4 20 thread nut welded to it to screw to the muffler ..just putting any size washer on a makeshift bracket is not the same
They say that every time a new engine comes out. Evo “not a Harley” twin cam, same story...all bs. M8s are closer to old style with a single cam sound. Twin cam is the oddball.
@@grknikolaki oh ok. I'm thinking of doing this to my virago 125. Want to remove baffles and the out the lollipop in. I want loud sound but not too loud and still want some of that power too
I know video may not translate accurately, but it didn't sound loud at all. Maybe because i run straight pipes with no baffles forever im just deaf? Lol
Daniel Cortez it gives back pressure, yes i drilled a little hole to put in a screw a bolt and nut.. since then i put a full exhaust that was on back order with my stage 2 torque cam
Daniel Cortez not really, just annoyingly loud, the lollipop concept narrowed it down a bit... this was a temporary thing till my pipes came in.. make sure your neighbors don’t have a shotgun..
Daniel Cortez you can see my other videos.. only one thing i regret.. to expensive for me to change at the moment.. should of bought, the tuner the links to a app via Bluetooth. to do your own tuning/mapping..
Jean BIGNOIZ Noisette great on 0-60 mph, after that it’s normal i guess nothing to brag about, as nice as the wheels look, they are catch a lot of crosswind on high speeds .. gets my arm tired quickly
I test rode one in Westchester county ny..but on local streets...didnt do highway speeds though..the windscreen was a bit bland..hopefully they'll make a batwing fairing for it... Enjoy my friend..love the bike..God bless
I don't know, the newer stock Harley's sound more like Honda's trying to sound like Harleys.... I hope you get rid of those pipes and get some REAL pipes on there.. throw the washers away..
Good, now I bet it sounds Awesome ! I've got a 2n1 Pro pipe on mine, love it,, but probably going to a 2/2 when I install my new cams.. ride on be safe Brah !!
Preston Mistarz i used little grinder, the upper one slid right out, the bottom was a little harder by a little, had to bend the exhaust a little.. total time if you have the correct tools shouldn’t be longer then 20/30 mins
Hank Navarro this project was temporary fix till my 2-1 exhaust was delivered. It was loud and sexy, but the fuel was draining. Now with 2-1 RH it’s better..
Not sure what a lollipop ?????is I would definitely get some aftermarket pipes removal of the baffle was the worst thing to that will probably sit in the garage than on the street I see him trading that biking it'll be another low miles bike at the dealer $10,000 cheaper let me know where you trade it in so I can go pick it up LOL
Nice little upgrade. Sounds so much better with the 1" washers. And props to you for being such a badass dad and teaching your boys the rite way 👍👍
I'm liking your video cause you brought back to me soooooo many memories of my dad.... God bless you always brother... Thanks
Vromo Gata when i was a kid my older generation cousin used to take me for a ride, i couldn’t wait for parents to visit my uncles house . Plus hoping my cousin was there also so he can take me for a ride.. now i relived it with my children
@@grknikolaki that feeling man you unearthed was really nice and bitter at the same time no joke. Thanks again bud. If you're in Az Tucson ever we can ride together... Thanks again take care.
My dad would do that with me when I was helping him with my wrench skills and my late husband did the same my son's ..you my friend are a wonderful father you are I'll be taking my bike out this Thursday 👍💯🇺🇸👍
Thank you for the kind words, enjoy your ride.. are you from the nyc area?
@@grknikolaki yes I am a stone throw from new York I'm in Lowell mass outside if Boston
@@haleyraven.lilrocket9241 awesome.. leaving tomorrow after work. Goin to Laconia NH for bike week.. you have nice videos, but i think you should video that bike with you on it.. lol.. enjoy the freedom
That's a great dad right there! My dad did the same thing with me at that age 😁
Coolest dad ever!!
Awesome ride for the kids!
That's my bad Nick I was hating a bit nice bike keep making videos
Hi, did you felt by removing the baffles it needed a tuning? Lost power? have a 2019 fatboy not sure if to remove the baffles or spend 400 on slipons seems to pricey and i like how the stock ones look just hate the sound.
Federico Rodriguez Honestly I drove around maybe 80 miles without baffles until my full exhaust arrived. Didn’t want to drive around with the stock noise mufflers... but it was loud and eat up lots of fuel .. i think it out been best to tune also.. i took a chance.. Speak to a mechanic to give you better outcome or result
I have a street bob and feel the same way, dig look of the stock exhaust bit hate the sound
Nice family
Thanks!!!
Yeah I used to have a fat boy 05and it did the same thing have you already put the exhaust are you going to do the two and two two or two and two one
Yeah but I've been there too trying to do anything to customize a bike that's how you learn sweet bike just curious how does it handle around the turns about 70 miles per hour my friend's got a breakout and with the larger Tire, how does it handle in and out traffic
Hank Navarro , it handle good on turns.. but in on the highway with high traffic the solid rims get a crosswind at those speeds..
Colombia 🤘👍
The sound is too much slow , How do you do ?
supernonz1990 it was temporary till my real pipes were delivered.. it was loud till i put the Loki pops
do you change cam shaft ? or the idle sound is too slow because lolipop ?
supernonz1990 didn’t change anything , when my 2 to 1 pipe came in, i did a torque cam also with the scream eagle programer
thats not a lolly pop the thunder monster baffle in constructed of a section of exhaust tubeing cupling that inserts inside the muffer that has a 1/4 in flat washer fabricated on a stem in the middle that has a 1/4 20 thread nut welded to it to screw to the muffler ..just putting any size washer on a makeshift bracket is not the same
It was a temporary fix till my exhausted was delivered. Not sure what it’s called but it works for a month till my upgrades were delivered
One question do you remember the measuments of the original harley baffles specially length?
Federico Rodriguez sorry i don’t .. I’m sure you can find it online somewhere
superlow.
The new Harleys dont sound like Harley any more.
hum ever since fuel injection
They say that every time a new engine comes out. Evo “not a Harley” twin cam, same story...all bs. M8s are closer to old style with a single cam sound. Twin cam is the oddball.
wait isnt the bigger washer meant to give more pack pressure as its bigger?
Xforbidden31 my 2 to 1 came in the following week.. it was temporary till it came in...
@@grknikolaki oh ok. I'm thinking of doing this to my virago 125. Want to remove baffles and the out the lollipop in. I want loud sound but not too loud and still want some of that power too
No baffle its the best sound !!!!
I know video may not translate accurately, but it didn't sound loud at all.
Maybe because i run straight pipes with no baffles forever im just deaf? Lol
Dr. Crentist LoL!! It’s was to loud.. now since I’ve put a pipe and stage 2 torque kit
So you have to drill the pipe to install the lollipop??? What exactly is a lollipop???
Daniel Cortez it gives back pressure, yes i drilled a little hole to put in a screw a bolt and nut.. since then i put a full exhaust that was on back order with my stage 2 torque cam
Nick k did you feel decrease in power without the baffles ?
Daniel Cortez not really, just annoyingly loud, the lollipop concept narrowed it down a bit... this was a temporary thing till my pipes came in.. make sure your neighbors don’t have a shotgun..
Nick k hahahahaahahaahahahahaaahaahahaa ok, thanks a lot for your answers
Daniel Cortez you can see my other videos.. only one thing i regret.. to expensive for me to change at the moment.. should of bought, the tuner the links to a app via Bluetooth. to do your own tuning/mapping..
How is a Harley TOO LOUD ??? this must be your first one then..
ssdtrain1 first new one, yes
My dream bike..how does she move on the highway?
Jean BIGNOIZ Noisette great on 0-60 mph, after that it’s normal i guess nothing to brag about, as nice as the wheels look, they are catch a lot of crosswind on high speeds .. gets my arm tired quickly
I test rode one in Westchester county ny..but on local streets...didnt do highway speeds though..the windscreen was a bit bland..hopefully they'll make a batwing fairing for it...
Enjoy my friend..love the bike..God bless
Jean BIGNOIZ Noisette on long ride it’s a must!!
I’m putting mine up for sale, i want to get streetglide
Keep the fat boy don’t sell it.
I don't know, the newer stock Harley's sound more like Honda's trying to sound like Harleys.... I hope you get rid
of those pipes and get some REAL pipes on there.. throw the washers away..
ssdtrain1 hahaha that was temporary, bike was new and aftermarket pipe were on back order.. so i did DIY mod till the 2 in 1 pipe arrived..
Good, now I bet it sounds Awesome ! I've got a 2n1 Pro pipe on mine, love it,, but probably going
to a 2/2 when I install my new cams.. ride on be safe Brah !!
Se Fuel pak - 2-1 bellini - torque cam- and change the Honda horn it had on.
Power now is insane 0-70mph.
It appears you’re blocking 98% of exhaust free flow w those lollipop inserts
Kid didn't have his feet on the pegs. They were on the pipes! Going to have a mess when that tennis shoe melts!
How did you remove the baffles?
Preston Mistarz i used little grinder, the upper one slid right out, the bottom was a little harder by a little, had to bend the exhaust a little.. total time if you have the correct tools shouldn’t be longer then 20/30 mins
Preston Mistarz use some tool to cut the inside of the weld of the exhaust
Lets meet up and Rideee together LOL
Video was ok until unsafe rides with the kids not even properly dressed such as pants, shoes at the least.
"too" loud .... not to loud no excuse
2 into 2 or 2 into one
Hank Navarro this project was temporary fix till my 2-1 exhaust was delivered. It was loud and sexy, but the fuel was draining. Now with 2-1 RH it’s better..
Not sure what a lollipop ?????is I would definitely get some aftermarket pipes removal of the baffle was the worst thing to that will probably sit in the garage than on the street I see him trading that biking it'll be another low miles bike at the dealer $10,000 cheaper let me know where you trade it in so I can go pick it up LOL