Automatic waste segregator
ฝัง
- เผยแพร่เมื่อ 10 ก.พ. 2022
- Automatic Waste Segregator
Welcome to our TH-cam channel! In this video, we present an innovative project that utilizes Arduino technology to automatically segregate different types of waste materials.
By incorporating inductive, ultrasonic, and rain sensors, our waste segregator can accurately detect various waste categories. Whether it's dry waste, wet waste, or metallic waste, our system efficiently identifies and separates them.
Once a specific waste material is detected in the receiver bin, a digital signal is transmitted to the Arduino board, which then commands a stepper motor to rotate the base. The base holds multiple bins, each designated for a specific waste type, ensuring precise segregation.
To facilitate the process, we employ a servo motor that opens and closes a flap located at the bottom of the receiver bin. This mechanism allows the waste to be directed into the appropriate bin.
Furthermore, we utilize an IR sensor for homing purposes, ensuring the system remains calibrated and accurate.
For a detailed circuit diagram, you can visit this link: www.mediafire.com/view/2l0ex5...
If you are interested in obtaining the code and PDF project reports, please feel free to contact us via the following means:
- Phone: +919937477767
- WhatsApp: +919338144446
Join us on this journey of promoting efficient waste management through automation. Don't forget to like, comment, and subscribe for more exciting projects and updates! - วิทยาศาสตร์และเทคโนโลยี
😊I wanted to take a moment to express my heartfelt gratitude for your invaluable contribution for making our project. Your hard work, dedication, and expertise made all the difference in helping me complete this project on time.Your professionalism and commitment to excellence have been an inspiration to me, and I am truly grateful for your support throughout this entire process. Your willingness to go above and beyond to ensure the success of this project has not gone unnoticed, and I feel incredibly fortunate to have had the opportunity to work with you.Once again, thank you for your outstanding work and for being an integral part of my project's success. I look forward to working with you again in the future. Thank you so much sir 😊😊😊😊
Thanks for your appreciation dear.
how did you design the trash bin in 3d
Thanks for these, we already used this project to our subject as our project proposal. The owner of this project was very responsive. And we really appreciate it. Thumbs up to you sir! 👍💗
Nice video shot, well done, thanks for sharing it :)
I have a similar project for my proposal and had no idea where to start, so thanks to this vedio and you sharing the report and codes it is able to make my work easier and also able to convince the lectures of the project thank you very much
can you share to me your codes
Can u please share code with me I am doing the same
Nice idea
what kind of sensor did you use to identify which trash is it?
Verygood
Nice this project is same as ours but we are using a conveyor and a garbage separator like this to separate the trash. Thumbs up to you!
Thnks for your nice comment..
@@innovatics_automation can you provide the code sir?
Sure dear
@@innovatics_automation Nice project..👍Is this the exact code
Do you have details of your project?
Very useful project
Two bro
Super project 👍👍👍
Thank u
hi, how did you connect the power supply to both the inductive sensor and the arduino? did you remove the jack and connect the 2 raw wires together? thank you
You can do that also
Amazing sir 🔥
Thnk u
Nice project 👍🏻👍🏻but you have shown IR sensor in diagram where you have installed it.????
IR sensor is used for homing operation.
It is located at coupling of stepper motor with a strip os black tap
what if the wastes / garbages is inside the plastic bag?
can the stepper motor accommodate the weight if the bins are full and if we have a bigger bins than yours???
Accordingly u have to select a heavy duty Lima stepper motor and make some pulley arrangement.
Hi sir! Can you guide us in doing our project? It is an arduino uno automatic trash bin segregator same as yours but with automatic hand sanitizer
Pls ping me on whatsapp
can you post a tutorial?
Hey i have a question, How much money did it take to Complete the whole project?
Pl ping me on whatsapp
HI, THE PROJECT ISVERY NICE. COULD YOU PLEASE TELL ME THE PROCEDURES?
Thnks for ur appreciation. For the procedure u need to help yourself.
Any guidance at any point during ur project if u will need my assistance please message me.
the project is nice can you give me the full details about it
Pls find my contact in the description and communicate me
an excellent project sir can you list the materials used in making this machine
Thanks for ur positive comment on my video.
The components are
Arduino uno
Stepper motor 28byj-48 and driver
Proximity sensor
Rain sensor
Ultrasonic sensor
IR sensor
Servo motor
7805 Voltage regulator
Power Adapter
How much total cost it will be??
4k if u prepared by urself
what is the code of Arduino?
great project sir, what is the name of that thing that's neon green im referring to the material where you put the trash in
Thnks for watching my video.
The neon green material is plastic.
It is an integral part of the receiving bin.
@@innovatics_automation thank you sir, what is the name of that part exactly
Receiving bin
this is a nice project sir, how did you create the integral part of the receiving bin? can you tell us step by step?
nice project sir, can you tell me what are some detail of this, we're currently doing this project and can you guide us for some info?
Sure
Hii bhaiya components kya Lage batao na plssssss
Can we take 5V supply and Ground for stepper motor and inductive sensor from Aurdino board itself without using voltage regulator..
For the stepper motor u should not take 5v from Arduino.
You may use a 7805 voltage regulator for that.
For inductive sensor you use 12v dc from the main power adapter and use the signal from Arduino.
Sir thank you for the reply, where should be the placement of ultrasonic sensor and IR sensor?
@@bandnasharma6565 ultrasonic sensor will be at receiving bin and ir sensor will be near stepper motor coupling for homing..
Hi what do you use to move the cap of the receiving bin
Servo motor
Your project is same as our project we're working on as of the, I hope you can share the code and the components of this project. Thank you
Ping me on whatsapp
hello sir, how did that part below the neon green thing automatically opened?
Servo motor
Sir your project is very useful can you share the code of this program
Sure dear..
Sir, actually we are working on similar project... Can u provide details of the materials used?
Please go through the ckt diagram provided in the description link.
You will get the components details.
Sir, Thanks for your video. Sir can you send me , all the materials that you use to make this machine?THANKYOU!!
List of materials and ckt diagram are available in the descriptions
Hello....... Can I request????.... Can you make a video on how did you assemble this prototype?
Video is not available with me but I can guide you step by step.
For details ping me on whatsapp
i have one doubt if we dump all the 3 categories of waste at a time how can it detect
Need to put individually
Amazing project sir. can Arduino be used in this project sir ?
thanks and God bless
Yes u can use arduino
@@innovatics_automation thank you sir. Can you please help me with the coding sir ? I am writing a project similar to your great work, but mine it will only segregate wet and dry garbages.
It will be of great help sir
@@innovatics_automation Thank you Sir/Madam, I am short of words to describe how thankful I am to you.
May the Almighty God increase you in knowledge and understanding.
Greetings from Nigeria.
Any time anywhere, u will get full technical support.
Gud luck for ur project..
Regards,
Love from India
good project sir, would you please upload the wiring diagram to the google drive? I want to see the diagram sir.
Sure..
Pls visit descriptions for ckt diagram
Nice project, can you send the code and circuit dia.? thank you
For ckt diagram please go through the descriptions.
Sircan you do the building of the waste segregation please before this month February
Not possible because I am out off my office till February..
If you want me to guide you, definitely I can guide you .
Directly ping me on whatsapp
Nice project, but what is the code used for programming?
@@innovatics_automation sir..
I am unable to copy the code from comments
Then pls take a print and type👌
@@innovatics_automation 😊
What type of inductive sensor used? PNP or NPN?
Here I used PNP but u may use any kind of it.
hello can you tell me where was the ir sensor installed ?
Just below the rotating base for homing operation
Sir sorry to bother you but can you help us with our project, it's similar to this one. We just need some guidance on how to do it like this. It would mean a lot if you help us 🙏
Could u provide me ur contact no..
can you teach me about the codes on how to segregate the waste thanks
Pls ping me on whatsapp
We are working on the same project.. Can we have the code for basis and sensor details?
Please contact me on whatsapp
what is the device that you use in the rotation of the platform
Stepper motor
Regarding code and circuit dia. Pls feel free to ask.. ✅
i am doing a project same as that but the waste classification is different metallic waste, plastic waste and non plastic waste. i am still a beginner in using arduino and different sensors. may i see the code and circuit diagram for me to have an idea or basis.
Pls check the reply of other's comment.. I already mentioned the code..
If any difficulties .. pls comment
thnkyou very much. may i ask for the circuit diagram?
Hi, I'm doing the same project but my problem is the code, can I ask for it? How can I get it?
Sure,
Pls ping me on whatsapp
Hello sir! Can we have the circuit diagrsm of this?
Sure .. the ckt diagram is available in the descriptions.
please can you share with us the circuit diagram
Pls visit descriptions
Hello sir, how may I contact you to get the details on this project?
Whatsapp
Nepal❤❤
does it need any programming?
Yes
Sir, my group are working on the same project as yours. Can i have a copy of your code so that we can have a reference for coding?
Need any assistance directly contact me on whatsapp
Please contact me on whatsapp for further assistance
Sir hi nice project can you provide me with the code for our reseach thank you
Please contact me on my whatsapp
What if we put some quantity of mixed waste at a time then
The machine is not designed for mixed garbage .
You need to put one by one
Hi, is it okay if i ask for the code from the project? thanks.
Ping me on whatsapp
Nicee project can you help us with the procedure?
Sure
@@innovatics_automation i hope you received my email😊
The mail from which ID, Could u please give the details so that I can check
Yes, I got your mail.
Hello Sir, can you tell me, if is the name of that neo green
Receiver bin
Good evening , can i ask for the schematic diagram of that project plsssss.
I didn't find any option to send the pic of ckt diagram..
Share me ur fb link or WhatsApp no
@@narutoholictv7802 ??
Pls visit descriptions for ckt diagram
Nice work sir. Plz permit me to request for the code
Sure
@@innovatics_automation thank u so much sir, I really appreciate, God bless u!'
Sir can you details about component of project& details please sir
Stepper motor and driver
Ultrasonic sensor
Servo motor
IR sensor
Proximity sensor inductive type
Rain sensor
And buzzer
Pls visit descriptions for ckt diagram
sir , i checked all the replies and didn't see any code
Can you help me pls
Pls contact through whatsapp
hello sir what is the code using that project in Arduino?
Ping me on whatsapp
How to get in contact with you
I tried reaching
Ping me on whatsapp
hi sir can you share the materials and procedures of this project?
For other details pls check the descriptions.
sir can you share how to make the structure step by step?
I already shared the circuit diagram and component list in the description.
Try to prepare the project by yourself. If you need any kind of support from my side, definitely I will be there to assist you.
So don't worry , Just try to do atleast once.
Good luck dear
@@innovatics_automation sir good day sir can you help me about this project.. i already build the same as this and also input the code you provide but still it didn't work properly. can you please give me your WhatsApp number sir so that we can discuss it further thanks..
Sir may I know the coding list please 😢
What if we put all the Waste together?
Good question..
But it will not work
@@innovatics_automation can u suggest me any idea for this ?
please can you share with us the code of this project
Pls contact through whatsapp
Hello. Good afternoon, can you teach me how to program this?
Ping me on whatsapp
Sir sorry to bother you but can you help us with our project,it's similar to this one . We just need some of your guidance and tutorials on how to do something like this. It would mean a lot if you could help us.🙏
Pls ping me on whatsapp
Please let me know how to make this working model
Sure I will help you.
Feel free to contact me on whatsapp
good day sir ! i cant seem to find the codes in any of the comments, do you think you can send me the code? it will be a great help for our project, thank you !!
Now for the time being we have removed the code.
Pl. Contact through whatsapp
what are the materials you use sir?
Pls go through the description
hello, we are currently working for this project can you send the code?
Pls contact me on whatsapp
good day can you make a vid about the circuit of this project?
I can help u in all respects.
The only problem is that this project already been delivered to the concerned student so not possible for me to make full video in it.
I can share u the sketch as well as ckt diagram and help u step by step if u need..
@@innovatics_automation yes sir that will greatly help our project
U carry on..
At any point of ur project if u feel any difficulties just ping me
@@innovatics_automation how can i contact you sir? i mean i only want to see the circuit diagram of this project
Share me ur WhatsApp no..
I will reply u back
Sir what is the use of ir sensor
For homing
Sir can you help me if the code is free it used for educational purposes capstone to my school
Ping me on whatsapp
Pls post the code of this program ...
Please go through the comments of others..u will find the coading
Can this project be made with aurdino mega
Yes.. You can use Mega also
How may I contact you about any queries?
@@sudikshasharma248 call me on 9937477767
Nepal
how did you do the coding please help us
Pls DM me on whatsapp
Please give the details about components
Please DM in whatsapp
Plzz upload full building video, i dont know make it
try yourself.. any help ask me
hi sir can u guide us with this project?
Yes.
Sure
Sir what is the code for this thank you!
Ping me on whatsapp
Which board you used bro
Arduino uno
Sir can you tell me how much money do you spend on that
8k
Hello, I am titania of ipb university. I am interested in the various waste project for my college project. Am I allowed to request program codes, a list of tools and materials, and a series of schemes? Thank you in advance
For cktt diagram pls check the descriptions
sir can you plz share circuit diagram
Pls send a msg to my WhatsApp no
9937477767
Pls visit descriptions for ckt diagram
Can you give me the code please
Sure ..
Please feel free to contact me on whatsapp
Please provide the code
Sure dear..
Can u please send circuit diagram a
Thnks for your compliment .
Please leave a message on my what's app no
9937477767
Pls visit descriptions for ckt diagram
Is the code still available?
Ping me on whatsapp
Can we have some sample codes?
Pls check the replies of others'comments.
You will get the code.
Thnks..
Hello sir i am first year student of b tech cs i want to know about this project because i also want to build similar projects can you please help me , in my project 😊
Sure
@@innovatics_automation please sir give me your contact details please 🥺
Sir may you please help me to do this project
Sure dear .
Share me ur calling no..
I can help u in all respects
Sir where should I give the call number?
9937477767
Calling time evng
Ok, thankyou sir ❤
Pls visit descriptions for ckt diagram
How to give connectionss
Please visit the link provided in the description to get the circuit diagram
Where can i get the coding
Ping me on whatsapp
Sir if u not mind olese provide code
Please contact me on whatsapp
sour code if you can give it freely... ty
pls check the replies to others.. you will get the code over there
Sir can you help me to do this model
Ping me on whatsapp
Can I use arduino on this code?
Yes,
This code is for arduino
@@innovatics_automation ty for answering also can i have the circuit diagram for this video i like your design and i want to make one ty if you can
@@innovatics_automation sir can I ask what is the green circuit board
in the diagram?
Yes,
It's the stepper motor driver and it comes with the stepper motor.
Just plug and play type