I have a mk2 kuga 2016.titanium I had two punchers done in one tyre trade to do reset but it comes up not recniseing tps sensor after 20 mints and flashes then I reset it it just leaves the waring light do I have to replace the sensor
What if it keeps coming back after resetting ? Manual says: When changing the wheels of your vehicle, the tire pressure monitoring system needs to re-learn the tire pressure sensors. To achieve this perform the following: 1. Make sure all tires are inflated to the proper pressure. If not, inflate the tires to the correct pressure. 2. Park your vehicle for at least 20 minutes. 3. Carry out the tire pressure monitoring system reset procedure. The tire pressure monitoring system automatically re-learns the tire pressure sensors the next time you drive your vehicle for approximately 15 minutes above 25 mph (40 km/h).
Many thanks clear instructions saved me a trip to garage
A very helpful video, all instructions easy to follow. Thank you sir. 👍🙏
Brilliant my man, easy to follow
Simple and Informative Instruction. Thank you 🙂
Thank you. Great instruction.
Thank you. Reset-ed it. This video is a life saver.
Why does the warning sign come in the first place ? My tyres were 36 when it happened.
Fantastic saved me time. Thank you.
Brilliant! Thanks so much for posting this👍🚘
Brilliant thanks so much for this, it just saved me a trip to the garage 👍🏻
Excellent thank you
So easy to follow I look forward to more tips and advise
Awesome, thank you!
I have a mk2 kuga 2016.titanium I had two punchers done in one tyre trade to do reset but it comes up not recniseing tps sensor after 20 mints and flashes then I reset it it just leaves the waring light do I have to replace the sensor
Thanks so much. I’ve a 2025 kuga that goes into limp mode on cold mornings after initial drive off. Turn off and on rectifies
Top tip, thank you! It was making me crazy!
Cheers my friend most appreciated
Great. Thanks!
Can you do the same and reset the key fob?
Thanks
Perfect, no idea how to reset, do now 👍🏼👍🏼
Amazing, thank you very much!
Thanks ❤
How do you show the tyre pressures on the screen or is that not possible?
Hi I don’t think it’s possible for the pressure to show. Only on some cars you can see the tyre pressure.
Man, thanks a lot !!!!!
Legend..🤜🤛🤙👍
Świetnie. Udało się. Dzięki za pomoc
Legend. Cheers bruvvvvva
Hvala brate sutra cu to uraditi isto
Excellant.. veryvhelpful
Glad to hear that
Top man!
Thank you did the trick √√√
Perfekt
Thank You 😊
What if it keeps coming back after resetting ? Manual says:
When changing the wheels of your vehicle, the tire pressure monitoring system needs to re-learn the tire pressure sensors. To achieve this perform the following:
1. Make sure all tires are inflated to the proper pressure. If not, inflate the tires to the correct pressure.
2. Park your vehicle for at least 20 minutes.
3. Carry out the tire pressure monitoring system reset procedure.
The tire pressure monitoring system automatically re-learns the tire pressure sensors the next time you drive your vehicle for approximately 15 minutes above 25 mph (40 km/h).
Sorry makes no sense 2/3/23/30. Is it 23 is it 30 what’s 2 &3??? Thanks
Hi just put put 2.3bar or 33psi