Good job on the directions! I'm absolutely not a mechanic either, so I need simple instructions & this was perfect. I'll be saving this video & looking for more that is needed in the future from here. Thank you!
Hey thanks a million! I just got Danger boy leavers, and looked at bike thought hell no, BUT this video is most defiantly changed my mind and saved from paying someone to do! So i will try n the morning! Thank you
I love your video, but where can I get two of those retaining clips I can’t find them anywhere and you know somebody touched my stuff so of course they aren’t there now ugh
Hahahah you must be married as well! Any hardware store should have them, just bring the pin it to make sure it fits. If not then the Harley dealership will have them for 8x the price 😂
too short and pad needs to grow to over 5" as air intake blocks my leg. is there a site for longer bars /levers . clutch lever is questionable as its close to the crash bars.
@@thebikeofeli thank goodness...more reason to trust the workmanship . When It comes to riding I don't want to mess around and have something snap off while I'm riding . I've seen some pretty cheap stuff come out of overseas items.
I definitely have as well! I can say for certainty the quality on these are top notch. Lightweight and durable. I’m going to do a review video on them in a month or so after a few 1000 miles.
@thebikeofeli brother in law was working for joker, gave me a set of those levers, started to install yesterday bought new pins realized I needed bushings, got new clips what's the other big hole for?
@@thebikeofeli He is being an overdramatic dumb ass. You did your video great, I just installed brand new black levers on my 05’ Dyna, thanks to this video, easy peasy. Buddy who commented “you can’t see anything because of the camera angle” has no brain 😮😊
Why??? It helps the guys channel out with the TH-cam algorithm! Next time you go to work…don’t punch in on the time clock…sure you’ll enjoy working for free…
Good job on the directions! I'm absolutely not a mechanic either, so I need simple instructions & this was perfect. I'll be saving this video & looking for more that is needed in the future from here. Thank you!
Glad it helped!
I didnt know about the button. Thank you for great advice
Glad it helped!
I've been wanting to swap my levers out for shorty levers, great video!
Thanks so much! Hope it helps!
Hey thanks a million! I just got Danger boy leavers, and looked at bike thought hell no, BUT this video is most defiantly changed my mind and saved from paying someone to do! So i will try n the morning! Thank you
Glad it helped! It’s very easy to do! I did mine with 1 hand while filming simultaneously!
Thanks just changed mine after watching this with in 15 minutes
Glad it helped!
Great video bro, thanks for the helpful tips, getting those retaining clips on was the hardest part 😂
I definitely agree lol!
Thanks for the vidieo. I have a 2018 Fatbob and I ordered a brake and clutch lever.
@@eseltz no problem. Glad you liked it.
Great instructions! Thank you for making this video!!
@@Magdalena-g9g thank! Glad it helped!
Looks better and better each time
Thanks Scott! A lot more to come!
Thanks for the info bro much appreciated.
No problem. Glad it could help!
Brilliantly done real easy levers are awesome 💚🇮🇪☘️🙏
Much appreciated!
I love your video, but where can I get two of those retaining clips I can’t find them anywhere and you know somebody touched my stuff so of course they aren’t there now ugh
Hahahah you must be married as well! Any hardware store should have them, just bring the pin it to make sure it fits. If not then the Harley dealership will have them for 8x the price 😂
too short and pad needs to grow to over 5" as air intake blocks my leg. is there a site for longer bars /levers . clutch lever is questionable as its close to the crash bars.
Huh?
Good job, your camera was off a bit in clutch side, I do it just like you, very slow and carefully!
Thanks! Yeah it was tough to film and do it at the same time.
Nice bike, nice video! Thank you!
Thank you! I appreciate the support!
thanks, good job
@@billyfranz7941 much appreciated!
Recommend just using a flashlight when pointing out the break light switch. Other then that, the video was great, thanks.
Thanks for the tip! Glad you enjoyed the rest of it.
Do you have the links for the front and rear fenders; and the bags on the Street Glide
I don’t unfortunately. I tried to find them, but came up short.
Looks great ,you made it look easy !!👍
@@ROGERVELAZQUEZ1 that’s the beauty of editing lol. I should do a fail compilation for all my projects 😂
What tools did you use to break the clutch lever cable
I think it’s a 10 and an 11 crescent wrench.
I'm curious as to where Joker Machine parts are made.
They’re out of Lake Havasu, AZ.
@@thebikeofeli thank goodness...more reason to trust the workmanship . When It comes to riding I don't want to mess around and have something snap off while I'm riding . I've seen some pretty cheap stuff come out of overseas items.
I definitely have as well! I can say for certainty the quality on these are top notch. Lightweight and durable. I’m going to do a review video on them in a month or so after a few 1000 miles.
Lake Havasu Arizona
Great video
Thanks Paul!
Love it. Subbed.
Much appreciated!
Thanks bro
Hope it helped!
Ladies and gentlemen, if you've never heard a mouth breather, you have now
Very constructive comment. Glad the video helped you out.
This guys heavy breathing gave me a heart attack. Lol
Glad you liked the video
Hit like button before you watch video, step one remove mirror, drop on concrete, next use screw driver to remove circlip......
Hey, got the job done and it’s one of my best performing videos.
I appreciate the engagement with the video though. It helps the algorithm.
@thebikeofeli brother in law was working for joker, gave me a set of those levers, started to install yesterday bought new pins realized I needed bushings, got new clips what's the other big hole for?
@@OSOFLHP what other big hole?
@@thebikeofeli cool, didn't finish watching,
Couldn't see everything because of the camera angle.
Yeah it was tough to hold the camera and complete the project at the same time. My apologies.
Yeah just some feedback.
@@MW-do5xw any feedback is appreciated!
@@thebikeofeli
He is being an overdramatic dumb ass. You did your video great, I just installed brand new black levers on my 05’ Dyna, thanks to this video, easy peasy. Buddy who commented “you can’t see anything because of the camera angle” has no brain 😮😊
Do you realise the clutch side is off camera while you’re removing?
Yeah, kind of hard to film while removing a clutch lever.
@@thebikeofeli Tri-pod...
@@08StreetGlide good idea
ummm... when you were installing clutch lever you had the clutch off video so couldn't see it.
Yeah…tough to film and do it at the same time.
Good video, spend a couple bucks and buy some snap ring plyers.
That would make it tremendously easier!
You took that lever off too easy lol
😂 the entire bike is very simple. It’s just nuts and bolts.
Video too dark, can't see
Did you try turning up your brightness on your phone?
Thumbs down the second you say to hit the thumbs up.
Oh nooo 😂👍🏼
Why??? It helps the guys channel out with the TH-cam algorithm! Next time you go to work…don’t punch in on the time clock…sure you’ll enjoy working for free…
@@rogerbuesing9374choice of work not our problem
@@hunterw.4603 what does that even mean??? Try making a cogent statement!
you breathe so hard in your videos. Thats my only complaint. Its hard to listen too bro. Youre huffin.
Feel free not to watch! Trying to film, narrate and wrench on the bike simultaneously is not as easy as it seems.
your filming was mostly off screean your editing of this video bites.
Your videos are pretty well made …. Lol
Feel free to never watch it again
Great video
Thank you!