Fantastically helpful! What a relief not to have the amateurish, shaking camera, stuttering, starting four sentences and finishing none. Excellent camera work excellent content and excellent clarity. Thank you so much!!!
Thanks for the video, bought my first Harley Softail and dropped it getting it off a trailer and broke the brake lever. Your video was most helpful in showing me how to replace the lever. Thanks again!
Thank you for all the details, this video definitely encourage me 🙂 The only difference for my 2018 Ultra Limited was no need to take apart the housing, only perch.
I’m super proud of myself for being able to change the levers on my 2022 StreetBob! It’s been scary to ride it because I couldn’t adequately reach the clutch so I’ve mostly been riding my Sportster. Thank you for making the video. It made the process so simple!
@ 1:20- top bolt won't BUDGE!. I don't want to strip the bolt/or the bolt head. I sprayed a little WD-40,no dice-a little lube spray,again no dice. Any suggestions?-Much appreciated
You're welcome! Ride safe & Ride Often! Check out this TH-cam Channel as we have a ton of free videos for you! Check out our useful for purchase videos: www.lawabidingbiker.com/buyvideos BECOME AN ECXLUSIVE MEMBER-GET BENEFITS: www.lawabidingbiker.com/patreon Leave a flat donation: www.lawabidingbiker.com/donate Shop in the Official Law Abiding Biker Store: shop.lawabidingbiker.com Subscribe to the Law Abiding Biker Podcast: www.lawabidingbiker.com/app Join our free email club: www.lawabidingbiker.com/emailclub
I have a 2014 Low RIder, Dyna. Some people say put the carboard shim in and and some say not needed? Confused? What's your opinion on my bike? Thanks and as always great videos. Easy to understand.
Hey there I hope you see this I see it's been awhile. Ok right hand lever will not move , I'm hoping that can remove the lever I do have to replace both throttle cables too. Should I go ahead and order button ? Since start and run switch has faded out actually all have on right and left side I want to replace them anyway. Love the videos you make it easy looking, so don't stop and thank you for sharing it really helps. From Mobile, Alabama !
Thanks . My front caliper locked up and over I went ! Damaged the brake lever boss and smashed a finger ( 1 year to recover ) . Now it's time to fix the old skoot ( 2003 flstci 100 yr. anniversary model ).
You're welcome. Sorry to hear about the wreck. Ride safe & Ride Often! Check out this TH-cam Channel as we have a ton of free videos for you! Check out our useful for purchase videos: www.lawabidingbiker.com/buyvideos BECOME AN ECXLUSIVE MEMBER-GET BENEFITS: www.lawabidingbiker.com/patreon Leave a flat donation: www.lawabidingbiker.com/donate Shop in the Official Law Abiding Biker Store: shop.lawabidingbiker.com Subscribe to the Law Abiding Biker Podcast: www.lawabidingbiker.com/app Join our free email club: www.lawabidingbiker.com/emailclub
U betcha! Glad it was helpful! Ride safe & Ride Often! Check out this TH-cam Channel as we have a ton of free videos for you! Check out our useful for purchase videos: www.lawabidingbiker.com/buyvideos BECOME AN ECXLUSIVE MEMBER-GET BENEFITS: www.lawabidingbiker.com/patreon Leave a flat donation: www.lawabidingbiker.com/donate Shop in the Official Law Abiding Biker Store: shop.lawabidingbiker.com Subscribe to the Law Abiding Biker Podcast: www.lawabidingbiker.com/app Join our free email club: www.lawabidingbiker.com/emailclub
I just watched another guy do it on a 2018 without taking the whole thing apart. Also, if you watch this video close, you can see that it is not necessary.
To show everyone how to remove everything and the entire right side assembly. That way the tips and tricks can be used for many projects. Thanks for watching. The footage came from one of our handlebar install videos.
I bought a pair of skulls levers had no problem with clutch lever but went to do brake side the lever was tight trying to put in when I had it as far as I could get it the hole for pin was about 1/8” off. I own a Harley 05 Wide Glide any suggestions?
nice vid on the brake handle replacement but you must update your clutch cable handle replacement vid because the 2020 softails have a new spring/clip way to adjust and replace. Doc Harley beat you to that one. So much easier now
Thanks for sharing, and for info! You made it look like a "piece of cake" to do! (Yea, also thanks for pointing out to; "lube the throttle cables!") Y'all are great!!
I may be a complete idiot but I've watched this video three times. I understand the issue with the brake light switch. I see him installing a piece of cardboard which holds the brake lever closed which releases the pressure on the switch. Then when he takes it apart and the lever is gone when he tries to introduce the new lever where is he putting the shim because I don't see it. And I've watched it three times.
You're welcome! Ride safe & Ride Often! Check out this TH-cam Channel as we have a ton of free videos for you! Check out our useful for purchase videos: www.lawabidingbiker.com/buyvideos BECOME AN ECXLUSIVE MEMBER-GET BENEFITS: www.lawabidingbiker.com/patreon Leave a flat donation: www.lawabidingbiker.com/donate Shop in the Official Law Abiding Biker Store: shop.lawabidingbiker.com Subscribe to the Law Abiding Biker Podcast: www.lawabidingbiker.com/app Join our free email club: www.lawabidingbiker.com/emailclub
Thank you! Ride safe & Ride Often! Check out this TH-cam Channel as we have a ton of free videos for you! Check out our useful for purchase videos: www.lawabidingbiker.com/buyvideos BECOME AN ECXLUSIVE MEMBER-GET BENEFITS: www.lawabidingbiker.com/patreon Leave a flat donation: www.lawabidingbiker.com/donate Shop in the Official Law Abiding Biker Store: shop.lawabidingbiker.com Subscribe to the Law Abiding Biker Podcast: www.lawabidingbiker.com/app Join our free email club: www.lawabidingbiker.com/emailclub
Fantastically helpful! What a relief not to have the amateurish, shaking camera, stuttering, starting four sentences and finishing none. Excellent camera work excellent content and excellent clarity. Thank you so much!!!
Thanks for the video, bought my first Harley Softail and dropped it getting it off a trailer and broke the brake lever. Your video was most helpful in showing me how to replace the lever. Thanks again!
Thank you for all the details, this video definitely encourage me 🙂
The only difference for my 2018 Ultra Limited was no need to take apart the housing, only perch.
I’m super proud of myself for being able to change the levers on my 2022 StreetBob! It’s been scary to ride it because I couldn’t adequately reach the clutch so I’ve mostly been riding my Sportster. Thank you for making the video. It made the process so simple!
@ 1:20- top bolt won't BUDGE!. I don't want to strip the bolt/or the bolt head. I sprayed a little WD-40,no dice-a little lube spray,again no dice. Any suggestions?-Much appreciated
Thx for your crystal clear explanation.
Another excellent video , straight to the point and very infomative . Cheers to Ryan and everyone involved Thanks !!!!
The only vid I found showing the brake switch which is what I need. thank you.
You betcha!
You're welcome!
Ride safe & Ride Often!
Check out this TH-cam Channel as we have a ton of free videos for you!
Check out our useful for purchase videos: www.lawabidingbiker.com/buyvideos
BECOME AN ECXLUSIVE MEMBER-GET BENEFITS:
www.lawabidingbiker.com/patreon
Leave a flat donation:
www.lawabidingbiker.com/donate
Shop in the Official Law Abiding Biker Store:
shop.lawabidingbiker.com
Subscribe to the Law Abiding Biker Podcast: www.lawabidingbiker.com/app
Join our free email club:
www.lawabidingbiker.com/emailclub
So I tried pulling the lever after pulling the pin and may have sheered off that button. Any good way to go about fixing that?
Ryan, by chance would you know the size of that pin snap ring or have an amazon link to the snap rings? I destroyed my snap ring. Thanks!
Is there an adjustment for a 2008 Harley Davidson brake front brake lever
Ryan, as always thanks for the video. I'm replacing the stock hand levers with chrome. It's always easier to watch a project before attempting.
U Betcha!! 🤘
I have a 2014 Low RIder, Dyna. Some people say put the carboard shim in and and some say not needed? Confused? What's your opinion on my bike? Thanks and as always great videos. Easy to understand.
Hey there I hope you see this I see it's been awhile. Ok right hand lever will not move , I'm hoping that can remove the lever I do have to replace both throttle cables too. Should I go ahead and order button ? Since start and run switch has faded out actually all have on right and left side I want to replace them anyway. Love the videos you make it easy looking, so don't stop and thank you for sharing it really helps. From Mobile, Alabama !
Good video, getting ready to change my levers out, snapped old clutch lever, so looking for a good CNC machined AL black set. Suggestions?
Thanks . My front caliper locked up and over I went ! Damaged the brake lever boss and smashed a finger ( 1 year to recover ) . Now it's time to fix the old skoot ( 2003 flstci 100 yr. anniversary model ).
You're welcome. Sorry to hear about the wreck.
Ride safe & Ride Often!
Check out this TH-cam Channel as we have a ton of free videos for you!
Check out our useful for purchase videos: www.lawabidingbiker.com/buyvideos
BECOME AN ECXLUSIVE MEMBER-GET BENEFITS:
www.lawabidingbiker.com/patreon
Leave a flat donation:
www.lawabidingbiker.com/donate
Shop in the Official Law Abiding Biker Store:
shop.lawabidingbiker.com
Subscribe to the Law Abiding Biker Podcast: www.lawabidingbiker.com/app
Join our free email club:
www.lawabidingbiker.com/emailclub
Right to the point, ZERO bullshit. Not even one "uhh" Great job ryan
U betcha! Glad it was helpful!
Ride safe & Ride Often!
Check out this TH-cam Channel as we have a ton of free videos for you!
Check out our useful for purchase videos: www.lawabidingbiker.com/buyvideos
BECOME AN ECXLUSIVE MEMBER-GET BENEFITS:
www.lawabidingbiker.com/patreon
Leave a flat donation:
www.lawabidingbiker.com/donate
Shop in the Official Law Abiding Biker Store:
shop.lawabidingbiker.com
Subscribe to the Law Abiding Biker Podcast: www.lawabidingbiker.com/app
Join our free email club:
www.lawabidingbiker.com/emailclub
Do you need to remove the entire reservoir and switch housing?
I just watched another guy do it on a 2018 without taking the whole thing apart. Also, if you watch this video close, you can see that it is not necessary.
Exactly what I'm thinking is there any reason why it needs to all come apart and can't just remove the pin with it all attached to handle bars ?
love your videos! Not sure why you would take the whole case off the bars to do a simple brake leaver??
To show everyone how to remove everything and the entire right side assembly. That way the tips and tricks can be used for many projects. Thanks for watching. The footage came from one of our handlebar install videos.
Exactly the video I needed, actual visual description .
What size is this snap ring ?
I bought a pair of skulls levers had no problem with clutch lever but went to do brake side the lever was tight trying to put in when I had it as far as I could get it the hole for pin was about 1/8” off. I own a Harley 05 Wide Glide any suggestions?
Because of this video I was able to replace my break lever on my softail deuce fxstdi. Thank you 🏍💨✌️
what are those cables?
What about a 2021 doing brake and clutch lever?
Is this the same for a 2013 road glide ultra????
Thanks, great info on protecting the switch.
👍
Nice that you mention the switch, indeed, it can be a bit fragile.
nice vid on the brake handle replacement but you must update your clutch cable handle replacement vid because the 2020 softails have a new spring/clip way to adjust and replace. Doc Harley beat you to that one. So much easier now
Thank you for the great video. I did it!
Thanks for sharing, and for info! You made it look like a "piece of cake" to do!
(Yea, also thanks for pointing out to; "lube the throttle cables!")
Y'all are great!!
They must be different for a 24 road king, simple because they didn’t fall out like the video, what am I missing??
Many thanks. Very clear instructions.
Glad it was helpful!
Thank you Ryan, thank you very much
Ótimo vídeo, parabéns pela qualidade de
Great video just what I needed . Thanks
Glad it helped
Thanks Ryan(gave you a like). Have to go change it out now!!!!!!
New drinking game: Consume every time Ryan says "alright". LOL
I'm in!! LOL
great vid thanks very helpful
I may be a complete idiot but I've watched this video three times.
I understand the issue with the brake light switch.
I see him installing a piece of cardboard which holds the brake lever closed which releases the pressure on the switch.
Then when he takes it apart and the lever is gone when he tries to introduce the new lever where is he putting the shim because I don't see it.
And I've watched it three times.
great video!
Thank you!
Thank you!!!
You're welcome!
Ride safe & Ride Often!
Check out this TH-cam Channel as we have a ton of free videos for you!
Check out our useful for purchase videos: www.lawabidingbiker.com/buyvideos
BECOME AN ECXLUSIVE MEMBER-GET BENEFITS:
www.lawabidingbiker.com/patreon
Leave a flat donation:
www.lawabidingbiker.com/donate
Shop in the Official Law Abiding Biker Store:
shop.lawabidingbiker.com
Subscribe to the Law Abiding Biker Podcast: www.lawabidingbiker.com/app
Join our free email club:
www.lawabidingbiker.com/emailclub
Thanks Ryan!
U betcha!
Nice Job !
TY
Like!
Thank you!
Ride safe & Ride Often!
Check out this TH-cam Channel as we have a ton of free videos for you!
Check out our useful for purchase videos: www.lawabidingbiker.com/buyvideos
BECOME AN ECXLUSIVE MEMBER-GET BENEFITS:
www.lawabidingbiker.com/patreon
Leave a flat donation:
www.lawabidingbiker.com/donate
Shop in the Official Law Abiding Biker Store:
shop.lawabidingbiker.com
Subscribe to the Law Abiding Biker Podcast: www.lawabidingbiker.com/app
Join our free email club:
www.lawabidingbiker.com/emailclub