Good choice. Metal sheds are a PITA to put together alone. The bigger they are the harder to set them up and you have to have a perfectly level surface.
If you still have it, can you post a picture of the manual on your community page please? We received one with now instructions and the only way to get any is to send it back, get a refund, and repurchase it. 🤦 Do not want to have to go through all that if we don't have to. Thank you so much! @jtlifechannel9134 @@jtlifechannel9134
I just got a similar DIY shed but am still trying to figure out the best way to get a flat surface. I hadn't even thought of getting pavers like this, now I think this is the way I'll go with it. It looks like a perfect flooring and I don't want to get into pouring a base with concrete. Thanks for posting. I'll have to try to entice some friends to come and help. Beer and pizza anyone? 🤣
Putting ours up tomorrow, 2 adults and 2 children looking at 5 hrs to put up 😂😂😂. Base is flimsy for my liking though, what a job, holes didn't line up, roof didn't fit until jigged around, doors weak. Gave a bad and honest review to the company.
Kudos to anyone who manages to do this solo. Im finishing one off tomorrow on my todd 😂 I managed to do the shed just fine it was 13x12 If I recall... Structurally I'd not rate them & the prices are way too much for what they are. £600 is shocking.
Hey great video! I have a question...I live in Texas and it gets triple digit hot here in the summer. So I wanted to know, what are the highest temperatures you see in your area and how hot do you feel it gets in the shed during those hotter temps. I ask because we are planning to put our upright freezer in one of these.
Mine came without instructions. The sender said the only way to get instructions was to rebox it send it back get a refund and reorder it . Wasted my time and money. By the way this video was useless
Don't get frustrated easily.every seller has pdf copy of their manual instruction.just ask them for online instructions.or go to their website.have a good day.
One stonge wind and that thing will be airborn! I've seen how paper thin the sheet metal is on these cheap sheds. If buying one, expect disappointment and you WILL be fighting to get this to fit. Muscles will be needed and you own supply of custom hardware. These were made by the cheapest factories in China!
On this model ,you cant because it has 2 sliding doors because its designed to be in the wide area.but with a bit DIY ,you can upgrade or change the door to the side by only using 1 door but you will need some cuttings and bit of screwing or revitting cause you need to redisegn the 2 sides.but its up to you.
Good video, however, this is a very flimsy and cheap shed. Instructions are horrible. It will take another 50.00 in reinforcement parts to make this thing stable.
I bought a one similar from b and q. I tried stupidly to do it myself. Big mistake. Even with my wife helping it's taken me a full day and I'm still not finished. Some of the holes were really difficult to line up...... absolute nightmare.
@@jtlifechannel9134 cheers mate, ended up getting my partners sister boyfriend to do it and they messed it up, it’s standing but not water tight lol, I wanted it to go on the patio but he said no and put it on the grass at the bottom of the garden, didn’t put a base down or anything so I’ll have to make a base and move it 😂
You mean floor? Yes you can make any type of floor,you can buy additional materials as this type of shed are metal,it can be revit ilor weld to.or you can use wood as based floor.it depends on you.
Wilco messed up the delivery, customer service was worse than useless. The help line doesn't work and the online chat is hopeless, every enquiry takes two days to get a responce. Do NOT use Wilco to buy a shed under any circumstances. The site says that the assembly takes 2 people 3 hours to complete if i remember correctly. That is laughable, Need 3 people minimum and about 12-14 hours. Terrible product. Useless delivery. Customer service is at best inept and reaches levels of stupidity that beggars belief.
Man I wish I had a group of friends like this. Go team!
If youre just near my place.i can help you to build your shed.
@jtlifechannel9134 you are very kind, I live in CA Northern. I might be able to muster up a team.
I made the mistake of watching this before my shed arrives this week.... Now I'm rethinking this project!!! That's A LOT of fkn work! 😂
If you have some friends who can help you with,the better.
These type of sheds are a recommended 2 person build. I can build them by myself by using a folding 6 foot step ladder to prop up pieces.
Good choice. Metal sheds are a PITA to put together alone. The bigger they are the harder to set them up and you have to have a perfectly level surface.
Its a good choice and yes but need someone help to build it.but its worth it once its completed.
This video is useful for showing a rough outline of the process. It is not a how-to, tho. You will not see details of how these pieces fit together.
Being a man, mine has been sat in its box for 3 weeks. Watched this for inspiration,and think its gonna be sat there a lot longer now 😂😂
I'm about to do it alone next weekend 😃 so watching in front
Hope for the best.if you have someone even just 1 person the better.
and got the job done?
If you still have it, can you post a picture of the manual on your community page please? We received one with now instructions and the only way to get any is to send it back, get a refund, and repurchase it. 🤦
Do not want to have to go through all that if we don't have to. Thank you so much! @jtlifechannel9134 @@jtlifechannel9134
Update?
Jus check out my other videos i posted the update of the shed after 2.years.still stand ok.hope it helps
don't think this video is fast enough for the people looking on how to build this thing. You should speed it up a little more
lol,it took the 4 if us 3hours to finished
Lol go to settings > playback speed > 1.5x speed
Even in fast forward - that was some half ass sweeping in the beginning
Not a how to video.
It’s turbo time 😂
I just got a similar DIY shed but am still trying to figure out the best way to get a flat surface. I hadn't even thought of getting pavers like this, now I think this is the way I'll go with it. It looks like a perfect flooring and I don't want to get into pouring a base with concrete. Thanks for posting. I'll have to try to entice some friends to come and help. Beer and pizza anyone? 🤣
Yes you can do it.call your friends yo help yoi even just to hold something is a big help.
Thank you for this amazing video
Thanks
We have a 8x6 came in 2 boxes from Wayfair. 2 weeks ago. We still haven't finished it. Confusing as hell for a Italian musician and his ditzy wife lol
Just go step by step in the manual instructions
How is it holding up? Is it good during the rainy and windy season?
Yes its still holding good.its very sturdy.its been almost 4 years now still standing there in rain and wind.just screw the base to the ground cement.
What size is it on the video? Thx for uploading it
I'm a nobby no mates . I've ordered one of these sheds ( in green. But I have put a 9 x 6 up on my own, and I'm only 5ft 5 " lol
I need this inside my loft, in my Apartment is very cold and I wil use it around my bed to keep my heat on so no drafts, hopefully will fit my bed
Lol.you can buy a larger size of storage.there are different sizes and prices.
They don't show how they placed the roof....
great team work
Thanks mate
I'm about to do it myself this week... Really, I don't think so 😬
great atmosphere, very entertaining, thanks
Thanks
time lapse and still didn't show completion 😂
Putting ours up tomorrow, 2 adults and 2 children looking at 5 hrs to put up 😂😂😂. Base is flimsy for my liking though, what a job, holes didn't line up, roof didn't fit until jigged around, doors weak. Gave a bad and honest review to the company.
just follow step by step the instruction manual.you can do it
@@jtlifechannel9134 which was done. Doesn't alter the fact that the shed was poorly manufactured.
Hope you find a better brand.🙏
Get a few 2x4s to reinforce. Sucks to have to do that.
I developed carpal tunnel just watching the screwdriver action. Please, get a drill a set it to stop at a low setting and work your way up. holy moly
Haha... I know eh! I'm sure one of the neighbors at least had one extra drill they could borrow
Funny you should say that, gonna play havoc with my carpel tunnel tomorrow 😂😂
just need of patience ,we have finished the shed
Kudos to anyone who manages to do this solo. Im finishing one off tomorrow on my todd 😂
I managed to do the shed just fine it was 13x12 If I recall... Structurally I'd not rate them & the prices are way too much for what they are. £600 is shocking.
Hey great video! I have a question...I live in Texas and it gets triple digit hot here in the summer. So I wanted to know, what are the highest temperatures you see in your area and how hot do you feel it gets in the shed during those hotter temps. I ask because we are planning to put our upright freezer in one of these.
Hi the shed is good but in higher temperature it will be hot inside.here only 28°c maximum we can reach.
@@jtlifechannel9134 Goodness, we need to move to your city ASAP lol 😆 Thank you so much for the response 🥰
what size was this
8 ft. x 10 ft. Shed
So many screws , is it really nessersary , just following instructions without watching video would be a nitemare
Mine came without instructions. The sender said the only way to get instructions was to rebox it send it back get a refund and reorder it . Wasted my time and money. By the way this video was useless
Don't get frustrated easily.every seller has pdf copy of their manual instruction.just ask them for online instructions.or go to their website.have a good day.
How does this not get blown away with heavy winds?
The trees on the sides are covering the shed.its been there for more 3 years,still standing still.or you can screw it to the concrete floor.
One stonge wind and that thing will be airborn! I've seen how paper thin the sheet metal is on these cheap sheds. If buying one, expect disappointment and you WILL be fighting to get this to fit. Muscles will be needed and you own supply of custom hardware. These were made by the cheapest factories in China!
3 years has passed ,i am still waiting for that wind ,where would that be hahaha ha cause the shed is still intact
Nice video
Can you share the size of the boxes that were shipped?
There were 3 boxes came with sizes 50cm x 200cm.but all gone to bin already.sorry
@@jtlifechannel9134 Thank you so much! I just needed to know the sizes of the boxes. Appreciate the info!
@stacianspencer6972 your welcome
Hey! I was wanting to know how the flooring frame went? Do you have to screw it into the outer frame?
The floor frame can be screwed on a concrete floor slab or concrete or wood wall to make it more sturdy and stable.
Nice video of not showing a damn thing. Maybe you should speed it up
Can the doors be locked? I'm looking for something similar but can't see a close up on the door handles
I have another video showing the close up video of the door and inside the shed.just check my latest videos.you can make your own lock thru revit.
I does not come with locks
Greenfelder Oval
Barton Skyway
Hello
Did you put it on top of the pebbles ?
No.we put it on top of concrete floor
Where can I get a copy of the directions
You could download it on the website of your seller or brand name website.
Kessler Fields
Would two 16x16 sages windows work on the sides?
Yes its possible., but you need to do some metal cutting on the sides.
Looks quite flimsy, thanks for the video though, really helpful.
Thanks,but this one is sturdy once you completed tha assembly
Vernon Lock
Ummm, yeah a little faster would be good. Or just post a pic after it’s built would be better.
Hahn Curve
Rempel Crossroad
Can always tell when amateurs do a construction project, they don't wear safety glasses.
Thanks for the reminder,i will,cheers
Turcotte Corner
is it possible to put the door on the short side?
On this model ,you cant because it has 2 sliding doors because its designed to be in the wide area.but with a bit
DIY ,you can upgrade or change the door to the side by only using 1 door but you will need some cuttings and bit of screwing or revitting cause you need to redisegn the 2 sides.but its up to you.
@@jtlifechannel9134 ok. Thanks for the response!
Daisy Forks
Good video, however, this is a very flimsy and cheap shed. Instructions are horrible. It will take another 50.00 in reinforcement parts to make this thing stable.
yes its a bit flimsy but its a good shed.been useful for a year now.
Nice Video, but it doesnt show a lot, how they did the roof panels ??? You can not step on the roof !
roof panels are easy to install.but yeah you cant step on the roof.it a bit flimsy shed
putting this up now with only two people is a you no what i regret getting this but in the end my chickens and ducks will thank me
All the best hope you finish all well.
how did you anchor the shed to the slab?
we did not.anchor.this shed us heavy to lift.it been there fir a year already.
Russel Inlet
How long has it lasted is it still holding up in good condition
Yes its still in good condition.as long you clean the fallen leaves in the roof
What's the brand of this shed?
Biohort I think.
I bought a one similar from b and q. I tried stupidly to do it myself. Big mistake. Even with my wife helping it's taken me a full day and I'm still not finished. Some of the holes were really difficult to line up...... absolute nightmare.
Sorry to hear that.Hope i could help with that.
My advice on building these sheds up is to get as much help as possible. Some lining up the sheets and someone else screwing and bolting.
I would just suggest buying one already built. They sell wooden sheds close to where I live and it's a lot more convenient but pricier of course.
How many boxes does this come in as I’ve just got mine but there’s only one box
it comes with 2 big box.and inside another 2 small long boxes for other parts of the shed.
It's boxes within boxes
just follow the instructions step by step and youll finish it,in a few hours
@@jtlifechannel9134 cheers mate, ended up getting my partners sister boyfriend to do it and they messed it up, it’s standing but not water tight lol, I wanted it to go on the patio but he said no and put it on the grass at the bottom of the garden, didn’t put a base down or anything so I’ll have to make a base and move it 😂
Pierce Village
Hey, did that metal floor frame come with it, or did you purchase separately? Thank you.
Yes it does not have floor with it.you can set it up in a cement floor.
@@jtlifechannel9134 Thank you!
@@jtlifechannel9134 do you think I could possibly create a flat roof, as the smaller shed has, as opposed to the the one it comes with?
You mean floor? Yes you can make any type of floor,you can buy additional materials as this type of shed are metal,it can be revit ilor weld to.or you can use wood as based floor.it depends on you.
@@jtlifechannel9134 no, I mean roof. Lol
Ayana Park
Friedrich Junction
I'm struggling too do the sliding doors
Its just easy as you follow the instructions ,you can do it.👍
Already looked at them and so has 6 other people and we don't think the paper ones we have are right lol 😆😆😆
Cole Run
What’s real time it took?
It took the 4 of us 3-4 hours
Jeremie Mount
It's saying 6 ft vs 8ft. That is short
Koelpin Common
Ashlee Courts
How big is That ? Do you have a link
8 ' x 10 ' you can see in amazon panana corrugated metal shed
Can barely see what they did 😂😂😂
its a timelapse video,sorry
What brand was this shed and where did you buy it?
In Amazon online
What size should the base be
A flar base concrete or any solid base 4 × 6 ft.
Kylie Bridge
Brannon Estate
Zelma Estates
Penelope Drives
Ray Ferry
Does not help me ..😢
Volkman Roads
So, you never finished putting it together?
its finished a year ago already lol
@@jtlifechannel9134 oh. The video looks like you didn't finish it. The sun went down and the video stopped but the roof wasn't complete.
@@teddyruxpin3811 came here to see what a finished one looks like in real life. Guess I'll look elsewhere!
What this the U MAX shed?
no
Turcotte Estates
Nader Port
What brand is your shed ? Thanks
its costway
panana, metal corrugated shed
@@jtlifechannel9134 great, thanks
How many people does it take. 😂😂😂
2 is enough.but luckily i have lots of friends who are willing to help.
What’s the name brand of this shed?
Salamat! 😊
panana metal corrugated shed 8x10ft
Mante Centers
Glory to God kuya…exited na ako makita ung finish product
Did you buy this on Wayfair?
no, in amazon
Omg ours is from Wayfair and it doesn't show you the directions well. Just vague pictures very frustrating
What was the size
1100cm x 1900 cm
how much it cost
349£ a year ago
Hillary Trail
Wish I had 4 people
Im doing it my self 😅😅
Is hard for just one person
call a friend,yeah its quick work when you have help from someone.
In 4 days 1,5 hour -2 persons,1 day-5 hours 2 persons.Dont buy
I did this on my own: nightmare
its easy just follow the instruction step by step.with a help of a friend to hold the parts
@@jtlifechannel9134 my manuals where tottaly confusing, 2 person 2 days nothing matche together
Do you need any help 😜
thanks,but its done already.thanks anyway.😀
I spent two days putting this piece of shit together and it leaks lol
Maybe you haven't put the rubber washer for the screws for the roofing.just put rubber washer or put roof sealant for screws.that will fix the leak
Link
Amazon uk .just search for duramax eco shed
Mayer Fords
Koss Union
Wilco messed up the delivery, customer service was worse than useless. The help line doesn't work and the online chat is hopeless, every enquiry takes two days to get a responce.
Do NOT use Wilco to buy a shed under any circumstances.
The site says that the assembly takes 2 people 3 hours to complete if i remember correctly. That is laughable, Need 3 people minimum and about 12-14 hours.
Terrible product. Useless delivery. Customer service is at best inept and reaches levels of stupidity that beggars belief.
Better buy in amazon ,they deliver on time
@@jtlifechannel9134 Truth!
Lueilwitz Stream
Schulist Stream
Por que tan rapido no tiene sentido
Es que hemos hecho estos en 4 horas.ojala.puedo ayudar en algo.
How long did it take to put together?
for 4 of us,it take us about 2.5 hours
if you had a Mexican do it would’ve been like 45 min
That would be 😎 cool
@Jonathan I hope so. I get mine tomorrow and being Mexican and don't have anyone to help im kinda hoping in an hour or so
@@LycanRageUnlimited get you a six pack and your Mexicans instincts should start kicking in