Hint to anyone with a small engine, always shut off the fuel valve and let it run out so the carb is empty, then the remaining fuel is not in there to dry up and plug up the jets...
Dude, these mini bikes are so cool! I am 50+ years old and just bought one, okay maybe I got two from Runnings. Run like a champ and so much fun no matter how old you are! Great vid, highly recommend the bike
@@roar5952 I got mine at Runnings if you have one of them close by. Basic one costs $500, the one with front suspension and headlight is $650. Well worth the money!!!
These bikes are awesome! My only complaint is the chinsy foot pegs, really fun! Found mine at a outdoor store Black Friday deal for $550 each out the door! Super worth it, and you can upgrade to a Harbor freight 212 engine to get another 15+ mile per hour!
I bought one exactly like that. I added bicycle seat springs under the seat to make the ride really comfortable when off-roading. Also carry a small funnel in the tank storage box to help with re-fueling. Also swapped out the plastic fenders for metal ones from Northern Tool, although I did have to paint them camo colors to match. Also swapped the sprocket to a 60t for WAY more low end torque when riding off road. They are great mini-bikes that are fun to ride and fun to mod.
I'm in the process of doing the same fender upgrade on my MB200. I just bought some real tree duct tape and put it on the fenders. You can't tell unless you look up close.
this is an old vid but, i love this shit. i got my first mini on long island in the 60s. kids were building skateboards from roller skates and milk crates, the sting ray just came out and my old man came home with a rupp mini bike out of the blue, , about '67. he said years later he did it to keep me off the corner with the rowdys. out in the woods was where the rowdies were pops. im 68 and getting ready to get another mini.
NEW 200 Trail has rear shocks, 3 colors www.powersportsmax.com/shopping_cart.php/gclid/Cj0KCQjw3Nv3BRC8ARIsAPh8hgLJjV_mIa1rAngIZOK4iXb_6Xc4vDsyprcmiV52OYvy13yZbrz22xwaApK_EALw_wcB
Great review. Great bike - a classic among mini bikes. Love that the Harbor Freight Predator 212 is an easy swap should the engine go south. Found mine on CL for $100.
Me and my friend raced the Baja Warrior 200 vs my 2008 Kawasaki Klx 140... I was surprised. It held up till my bike it 2nd gear. Great bike and sound awesome...
THIS IS NOT HYDRAULIC FRONT SUSPENSION. It has springs only but it works just fine. It's 6.5 HP not 6. If you want a much better mini bike the trailmaster MB200-2 has a torque converter not just a chain like this model. It has front and rear suspension and disc brakes and goes much faster all for about 200 USD more.
I have a suggestion or two for you. As far as the fake tank and gassing you can drill a hole with a door knob bit in the storage above the gas tank filler and get felcro and make a flap to pull open fill the gas close the flap and keep your tool box clean. Next to drain the oil next time thread in a short tube with a good liquid thread sealer then put a bolt in and you will pass the engine mount or do what Generator makers do and install a tube you can snap up when done with a plug in the end they both will work and look neat. Make sure when you thread into the oil drain with a tube only thread in until your at the end of the inside of block so there are no restrictions to oil drainage. I hope this helps and both work.
I'm currently building a bike similar to this! I bought one for a good deal and should not have sold it, I found it drove really nice with no shock for suspension on the back! It was like floating on air because most of the impact was absorbed threw the front forks! I purposely went without because these bikes are not the same as the thin tire dirt bikes where you really wouldn't want to go without, and they have a longer rear arm so the ride quality would be off without a shock! And those foot pegs! Amazing!!!!! I hear ya on the gas cap, except they are home made bikes! It's kind of cool when you find out how thier built! I just seen this video again, and noticed the rear fender isn't even properly situated on the bike! Looks odd
If you think about it it actually has three sprockets, one for the clutch, one for the clutch chain to go to, and one behind that one to allow the main chain to line up with the back sprocket.
I have purchased two of these bikes last year from coastal farm and ranch they are pretty fine.. But I found significant flaws in it and 1 of the factors is that my wife was riding down a hill when she applied the brake the The brake handle holding the brake line broke right off she had to lay the bike down in order to stop! The welds on the bike are Not good and I question the metal it was made with!!! I much prefer the bikes we have now which is a trail master MB200-2 Well worth the extra $350! A much more superior bike faster and better quality all the way around! Happy biking!!
You could actually put fuel in the storage tank in a small fuel carrier giving you more ride time! I have seen guys put another brand fuel tank in the place of the storage tank too.
THE DRAGON lol can wait to tell my friend that, he has this model, and says how cool it is but it is made much cheaper than my Baja 200 Warrior (I have had mine over 2 years and it has never broke. He has had his for much less and has broken it multiple times)
No wonder I cant find them anywhere. Ive seen that they were recalled but I didnt wanna believe it cuz i wanted to buy one but all I can find is the coleman version
Cool review. Just wanted to mention something about the weight limit capacity. I weight 390 LBS and my Massimo 200 hauls my big ass like nothing. These are great bikes!!
Transmission lol, torque converter or centrifugal clutch. The oil can be drained from a plug on the other side/back of the engine where there is a hole in the frame pan. Spark plug wrench not for "changing the tire".
@@BraydenAvery-ey4et thank you because I've been seeing a lot of people on Reddit saying that there's can supposedly get seventy-five to a hundred miles to a gallon... I'm going to be going to pick up a mini Baja warrior 200 this Wednesday so at least now I definitely know it's best for me to go pick it up and not try to go get it and right at home...
@@BunnyFooFooOG yeah I'm not exactly sure but I rode to the city outside of mine and back with some friends and it was about 35 or 40 miles all together and I ran out of gas right around the corner from his house
I'm trying to get a trailer for this so i can scrap.I want to know the name of the wagon or motorcycle trailer or flatbed cart that can work good for this can anybody help ?
When your emptying the oil use parchment paper... All you have to do is tape the sides of the parchment paper and make sure that it has a slight dip in the paper so that the oil will go straight into the pan...
You can modify that fairly simple. I watched a guy modify his on his TH-cam channel. Tie a fishing or metal wire from the throttle to the governor and you'll get around 55kph but you'll easily blow up the engine. Now you can put a torque converter on it and get about 80kph on it. That is if you bypass the governor. Plus there's no issue about blowing up the engine of you out a torque converter on it since the 6.5 hp engine isn't powerful enough to bring it into a high RPM, but you can still get 80kph out of it. Oh I guess 40-45mph since I guess this is American lol.
you'll save yourself from ever having to rebuild the carb if you stick to non-ethanol gas. the e10 gas has alcohol in it which attracts water and settles at the bottom of the tank/carb during long storage periods. stabilizers dont do anything to combat this other than change the color of your fuel.
hey man hoping you can help me out. planning to get this for my wife who is timid on power. was wondering if this is snappy or very easy linear power? and is the power delivery really smooth or kind of "mind of its own" jumps ahead etc
It's pretty smooth with linear power. If you are at a stop and you open it up to full throttle you will not flip it or anything. Anyone can hope on and be comfortable within 10 minutes.
if i were you i would paint all camo mate black (for a cool color combo of grean and back) then put a 212 cc predator engine on from harbor freight. they are a coue hundred bucks and easy to do just connect the throttle and bolt it down. its the same size as u have on there already. then put a torque converter on and u will be goin about 45 mph. and have a bit more fun. its all money tho. and maybe not worth it on that bike. but its a fun project to do :)
Take the fake tank off. Relocate the gas tank back. Where it is. Upgrade tanks..or use the stock one. Take off the headlight for led relocate than add a handlebar bag. And upgrade the tires awesome big under a grand. If you take care If it will probably last forever.
hey there...I just got one of these...but it makes a lot of clutch noise when you first start out. A high ringing metal on metal sound. but the bike runs perfect and drives fine. The sound goes away once you start moving over 5mph. ANY idea as to what that could be? Thank you!
+RygarTheDestroyer hey man! Thank you! Yeah. I guess you can say squeaking. It's a high pitched metal sound, but it goes away after the clutch is fully engaged. So you don't think the clutch is defective right? Like one of the shoes is lose?
It is hard to say without being able to see it in person. If you just bought it and you don't think it is working correctly I would try and exchange it for another one.
I scored a used one for $80 two weeks ago, been shredding it all week. It was pretty rough but for less than a new one it's got a built engine, torque converter (that was a fucking nightmare) and brand new tires and fenders and a seat. It rips wheelies and will pull me up hills all day with the torque converter. I'm 200lbs. Get the bike, it's pretty kick ass but go through the trouble of making a torque converter work or buy a new one with it already.
Hey man I’m about to do a trade but I don’t know if the mini bike is good he said that I have to put the torque converter on because I fell off and can I send you pics of the bike
Hint to anyone with a small engine, always shut off the fuel valve and let it run out so the carb is empty, then the remaining fuel is not in there to dry up and plug up the jets...
Had that happen on my ct200u ex. That thing was a bitch to clean out.
wow ur super
And drain the bowl
I just bought one that sat for 5 years. It took me 10 minutes to clean the carburetor. People act like it’s the end of the carbs life and order new
The no rear suspension really sucks. Bruised my tailbone so bad it hurt for weeks.
Dude, these mini bikes are so cool! I am 50+ years old and just bought one, okay maybe I got two from Runnings. Run like a champ and so much fun no matter how old you are! Great vid, highly recommend the bike
Where can get one. ?
How much do they cost ?
@@roar5952 I got mine at Runnings if you have one of them close by. Basic one costs $500, the one with front suspension and headlight is $650. Well worth the money!!!
In my 50’s and love it!! Let a lot of air outta back tire to soften the ride off road.
These bikes are awesome! My only complaint is the chinsy foot pegs, really fun! Found mine at a outdoor store Black Friday deal for $550 each out the door! Super worth it, and you can upgrade to a Harbor freight 212 engine to get another 15+ mile per hour!
I bought one exactly like that. I added bicycle seat springs under the seat to make the ride really comfortable when off-roading. Also carry a small funnel in the tank storage box to help with re-fueling. Also swapped out the plastic fenders for metal ones from Northern Tool, although I did have to paint them camo colors to match. Also swapped the sprocket to a 60t for WAY more low end torque when riding off road. They are great mini-bikes that are fun to ride and fun to mod.
can you kindly shar ewith mw the part that you replced here or via mail, telegram , or how you prefer ?
I'm in the process of doing the same fender upgrade on my MB200. I just bought some real tree duct tape and put it on the fenders. You can't tell unless you look up close.
this is an old vid but, i love this shit. i got my first mini on long island in the 60s. kids were building skateboards from roller skates and milk crates, the sting ray just came out and my old man came home with a rupp mini bike out of the blue, , about '67. he said years later he did it to keep me off the corner with the rowdys.
out in the woods was where the rowdies were pops. im 68 and getting ready to get another mini.
Massimo has the patent on this bike now. I bought one at tractor supply last week.
NEW 200 Trail has rear shocks, 3 colors www.powersportsmax.com/shopping_cart.php/gclid/Cj0KCQjw3Nv3BRC8ARIsAPh8hgLJjV_mIa1rAngIZOK4iXb_6Xc4vDsyprcmiV52OYvy13yZbrz22xwaApK_EALw_wcB
I’m at tractor supply right now I’m thinking about buying one but the welding on it is really shitty
The bike is very strong and powerful for a mini. I'm 250 lbs. It climbs steep hills with no problem
Tony Cino Thanks I think I might buy it with your recommendation
Which tractor supply do I go to
Great review. Great bike - a classic among mini bikes. Love that the Harbor Freight Predator 212 is an easy swap should the engine go south. Found mine on CL for $100.
Can you give me a cheap engine that's a deff upgrade?
Such a nice neighborhood, and this guy is riding his mini bike around. Lol I love it.
Me and my friend raced the Baja Warrior 200 vs my 2008 Kawasaki Klx 140... I was surprised. It held up till my bike it 2nd gear. Great bike and sound awesome...
Good review. Storage compartments pretty cool.
THIS IS NOT HYDRAULIC FRONT SUSPENSION. It has springs only but it works just fine. It's 6.5 HP not 6. If you want a much better mini bike the trailmaster MB200-2 has a torque converter not just a chain like this model. It has front and rear suspension and disc brakes and goes much faster all for about 200 USD more.
I have a suggestion or two for you. As far as the fake tank and gassing you can drill a hole with a door knob bit in the storage above the gas tank filler and get felcro and make a flap to pull open fill the gas close the flap and keep your tool box clean. Next to drain the oil next time thread in a short tube with a good liquid thread sealer then put a bolt in and you will pass the engine mount or do what Generator makers do and install a tube you can snap up when done with a plug in the end they both will work and look neat. Make sure when you thread into the oil drain with a tube only thread in until your at the end of the inside of block so there are no restrictions to oil drainage. I hope this helps and both work.
I'm currently building a bike similar to this! I bought one for a good deal and should not have sold it, I found it drove really nice with no shock for suspension on the back! It was like floating on air because most of the impact was absorbed threw the front forks! I purposely went without because these bikes are not the same as the thin tire dirt bikes where you really wouldn't want to go without, and they have a longer rear arm so the ride quality would be off without a shock! And those foot pegs! Amazing!!!!! I hear ya on the gas cap, except they are home made bikes! It's kind of cool when you find out how thier built! I just seen this video again, and noticed the rear fender isn't even properly situated on the bike! Looks odd
If you think about it it actually has three sprockets, one for the clutch, one for the clutch chain to go to, and one behind that one to allow the main chain to line up with the back sprocket.
i love these bikes!
Same exact bike! My Dad bought me one for Christmas
I need one now
Nice review. Really nice.
Looks nice!!
I have purchased two of these bikes last year from coastal farm and ranch they are pretty fine.. But I found significant flaws in it and 1 of the factors is that my wife was riding down a hill when she applied the brake the The brake handle holding the brake line broke right off she had to lay the bike down in order to stop! The welds on the bike are Not good and I question the metal it was made with!!! I much prefer the bikes we have now which is a trail master MB200-2 Well worth the extra $350! A much more superior bike faster and better quality all the way around! Happy biking!!
I love mine they are very good for of roading
You could actually put fuel in the storage tank in a small fuel carrier giving you more ride time! I have seen guys put another brand fuel tank in the place of the storage tank too.
For what its worth,these were actually recalled by Baja Motorsports, due to front forks seperating from front wheel. Recalled Sept. 9 2015
Currently available as the Coleman CT200U-EX
Not this model the recall was only for the black ones.
THE DRAGON lol can wait to tell my friend that, he has this model, and says how cool it is but it is made much cheaper than my Baja 200 Warrior (I have had mine over 2 years and it has never broke. He has had his for much less and has broken it multiple times)
No wonder I cant find them anywhere. Ive seen that they were recalled but I didnt wanna believe it cuz i wanted to buy one but all I can find is the coleman version
Cool review. Just wanted to mention something about the weight limit capacity. I weight 390 LBS and my Massimo 200 hauls my big ass like nothing. These are great bikes!!
Transmission lol, torque converter or centrifugal clutch. The oil can be drained from a plug on the other side/back of the engine where there is a hole in the frame pan.
Spark plug wrench not for "changing the tire".
what style of bike is that like how you can get mini dirtbike and minimoto etc
I got that bike that year!
Hey Rygar, Is there any way to put an electric start on these things? I'm not so young and the pull start is very difficult for me.
awesome
Lower your tire pressure it helps a lot
Very cool i have the coleman 200ct these bikes seem to be almost the same.
DTD RIDER that thing is shit i have one and all it does is fall apart proably not for but for me it does
This one is the Coleman CT200U-EX
Diii8TD RIDER and 2222
Good review
How about extending the oil drain plug with a short nipple and cap?
There really good mini bikes mine was in the storage for 4 years and still runs and starts on first pull
Do you know how many miles you can get on a full tank?
@@BunnyFooFooOG mine goes about 35 with a full tank it has good gas mileage for how little it holds
@@BraydenAvery-ey4et thank you because I've been seeing a lot of people on Reddit saying that there's can supposedly get seventy-five to a hundred miles to a gallon...
I'm going to be going to pick up a mini Baja warrior 200 this Wednesday so at least now I definitely know it's best for me to go pick it up and not try to go get it and right at home...
@@BunnyFooFooOG yeah I'm not exactly sure but I rode to the city outside of mine and back with some friends and it was about 35 or 40 miles all together and I ran out of gas right around the corner from his house
@@BraydenAvery-ey4et alright well I'm going to check to see if there's possibly an odometer that I can get for the bike...
The shocks are not hydraulic, it's a spring and they recalled them for it. Mine fell apart, lucky I wasn't moving at the time.
there is a govenor also. top speed is about 30-35mph. when govenor is turn down
Throttle stop screw on carb
what if you put gas treatment in it would it help out the gas millage and run time ?
Hi how you make lighting lights dimension?
whoa u almost smacked the tree. i was like 😱
I bought one and had it in storage now it won't start put a new carburetor on it and spark plug and still nothing any advice?
25? Mine does 45 without governor
Mines from the 80s I'm pretty sure.
That translates into "yours is cooler than mine"...
Except I can stand on MY pegs.
You can stand on these pegs too but its kinda sketchy
where d u buy the refraction parts
I'm trying to get a trailer for this so i can scrap.I want to know the name of the wagon or motorcycle trailer or flatbed cart that can work good for this can anybody help ?
hi, I have one with real flat tire, it is not consolidated with rim. Any advice out there?
When your emptying the oil use parchment paper...
All you have to do is tape the sides of the parchment paper and make sure that it has a slight dip in the paper so that the oil will go straight into the pan...
How fast does it go
How many miles will it currently go??
You can modify that fairly simple. I watched a guy modify his on his TH-cam channel. Tie a fishing or metal wire from the throttle to the governor and you'll get around 55kph but you'll easily blow up the engine. Now you can put a torque converter on it and get about 80kph on it. That is if you bypass the governor. Plus there's no issue about blowing up the engine of you out a torque converter on it since the 6.5 hp engine isn't powerful enough to bring it into a high RPM, but you can still get 80kph out of it. Oh I guess 40-45mph since I guess this is American lol.
Torqueaverter are slower than centrifugal cluchs because they are made for torque not speed
Can you please tell me how many miles it can get on a full tank?
will it be a good ideal to put this great stuff inside a real tree monster moto mini bike tire so that the tire don't go flat ?
Where did you get it from
Lmao such a nice house and you're driving in the grass. Dude how are you parents not pissed
hayden hale I have the same exact thing if his parents allow him to have it to off-road why would he NOT be able to drive it?
It's only like 250 lbs total. It's like a fat guy walking on the lawn. Plus adults can do whatever the eff that want. He might a homeowner.
I had a track (almost) in my yard as a kid, grass grows back 😉
Lol
What year is this I have the exact same bike but bought it from somebody and they wasn’t sure what year it was so what year is this bike
how often should you change the oil?
you'll save yourself from ever having to rebuild the carb if you stick to non-ethanol gas. the e10 gas has alcohol in it which attracts water and settles at the bottom of the tank/carb during long storage periods. stabilizers dont do anything to combat this other than change the color of your fuel.
HOW DOES THE HEADLIGHT WORK
Where did you buy it?
What type of license do you need ? How many mph does it go ?
Sounds like it should be in a Star Wars movie. Very cool.
Exactly my thoughts!
That socket that is in the clear bag is ready for the spark plug
can i sthill get one and where can i and where did you get yours
how much hp does it have? & what site its selling on?
Can we test it out before we go it
where did you get it?
Nice white set
Do you know where to purchase one of these? Tractor supply removed them from their website a couple of days ago.
probable fire recall look it up
I have one of these. It's liiiiit
How much and wher did you get it from
Where did you get that?
i got one and it's good
hey man hoping you can help me out. planning to get this for my wife who is timid on power. was wondering if this is snappy or very easy linear power? and is the power delivery really smooth or kind of "mind of its own" jumps ahead etc
It's pretty smooth with linear power. If you are at a stop and you open it up to full throttle you will not flip it or anything. Anyone can hope on and be comfortable within 10 minutes.
how do you drain the gas
I put the 200cc baja engine on my taco frame doodle bug go's 60mph very good engine
where did you buy this? I can't find them anywhere?
You can find them at dunums sports
Where did u buy it at
did you do it
What is the muffler system is it loud
Where did he buy this?
Disappointing, came here to see a mini bike but i only see an engine and a seat.
Tanjum Gaming that guy dont understand all he knows about it
Tanjum Gaming
Tanks
Tanjum Gaming XD
he didnt say to much right about it, i own the coleman and i have mine going over 25 around 40 now.. might switch engine soon
Does it work in snow
How do you know if it's a 200cc or 196cc
i have one i like it
Either bypass or remove the governor! Ugh, I can hear it working!
If you remove the governor than you run the risk of blowing up the motor
if i were you i would paint all camo mate black (for a cool color combo of grean and back) then put a 212 cc predator engine on from harbor freight. they are a coue hundred bucks and easy to do just connect the throttle and bolt it down. its the same size as u have on there already. then put a torque converter on and u will be goin about 45 mph. and have a bit more fun. its all money tho. and maybe not worth it on that bike. but its a fun project to do :)
Wear can you purchase them & how much?
Take the fake tank off. Relocate the gas tank back. Where it is. Upgrade tanks..or use the stock one. Take off the headlight for led relocate than add a handlebar bag. And upgrade the tires awesome big under a grand. If you take care If it will probably last forever.
how much did it cost
I would move the foot pegs, or add another set.
dude that tool is for the sparkplug 😂😂
hey there...I just got one of these...but it makes a lot of clutch noise when you first start out. A high ringing metal on metal sound. but the bike runs perfect and drives fine. The sound goes away once you start moving over 5mph. ANY idea as to what that could be? Thank you!
+SonnyGTA I took it out yesterday and there is a squeaking noise when the clutch engages but I think that I perfectly normal.
+RygarTheDestroyer hey man! Thank you! Yeah. I guess you can say squeaking. It's a high pitched metal sound, but it goes away after the clutch is fully engaged. So you don't think the clutch is defective right? Like one of the shoes is lose?
It is hard to say without being able to see it in person. If you just bought it and you don't think it is working correctly I would try and exchange it for another one.
Una pregunta ? Está? En venta tu mini moto
Can a preditor 212cc fit in this?
I want to get one, I heard that you get them at tractor supply for 500 or 600$
matthew walsh I first saw them at Menards around Christmas time.
I bought mine at home depot for 650
I have been wanting one of these for years
I paid 900 3 yrs ago when this comment was posted
I scored a used one for $80 two weeks ago, been shredding it all week. It was pretty rough but for less than a new one it's got a built engine, torque converter (that was a fucking nightmare) and brand new tires and fenders and a seat. It rips wheelies and will pull me up hills all day with the torque converter. I'm 200lbs. Get the bike, it's pretty kick ass but go through the trouble of making a torque converter work or buy a new one with it already.
where can I get one
hey were did you get the mini bike if you can tell me please
TFC
Where do you get this in CANADA please someone tell me
Princess Auto
for anyone looking to buy one of these they sell them at tractor supply
Not the tractor supply stores here
Mothers, it was a long time ago but I just can't mine at tractor supply for that bitch was expensive as fuck ran me 800$
@@scs4950 Tractor supply has them for under 500.00 Just got mine..
this would be great with if you replace the storage to a tank change the seat to a sprung and put apes on it
Just bought my daughter one of these. We are tearing it down to frame and building it back up into a chopper, much like you described
Hey man I’m about to do a trade but I don’t know if the mini bike is good he said that I have to put the torque converter on because I fell off and can I send you pics of the bike