Thanks for the video. You showed me exactly what I needed to see. It looks like a major pain in the arse! I'm doing this job tomorrow for a friend. Wish me luck!
I just welded a 14mm wrench to a piece of flat 1" stock, left it long to break it loose, shortened it to get enough swing to tighten it. The hose is not really the right part, so the orientation of the sensor fitting and pump fitting are off. Needs longer screws and you will have to get under the prelude to play with your hose..
Ebay for parts or the junk yards! Honestly I can fit like 5 censors in my pocket lol they gonna junk it anyways. I just watched as the pick part in my area smashed TWO 1988 4WS Ludes . Both had perfect bodies and interiors! It was sad that they wouldn't sell me the entire car and wanted to charge per parts which for both cars they wanted over 15,000$... really d*mb business model considering I offered them 1000$ each.. pretty sad
Thanks for the video This job done by Honda would cost me 1100 cad this OEM part can cost up to 600 Cad or aftermarket like this is so much cheaper as like in this video and installation is nothing I can't handle myself, especially after watching this video thanks!
Sometimes I think it's Japan's way of getting back at us for WW2 lol Seriously how many times is the space we need just a mm or 2 short to fit our fingers or hand? Or to get our arm at that certain angle to grab something but our elbow won't fit? ITS INSANITY lol
When you watch TV don't they have ads every 10 minutes including in the middle of the show. I make videos for people to watch and I hope they help. You and many others can watch them for free. The ads help me, motivate me to make more because I make a little bit of money from these ads. 80% of the ad revenue is going back into the videos. I'm sorry but not sorry that you are unhappy with me placing ads mid video like 90% of all other youtubers.
@@MrJayDM plus yo video isn’t the clearest resolution nor did it help with replacing the high pressure power steering hose on my 99 accord so yeah dawg fuck yo ads 😈
Just picked up a lude a few weeks ago and I’m doing this job tomorrow thanks for showing everything that you need to see to get it off
Glad I could help, Good Luck!!
Thanks for the video. You showed me exactly what I needed to see. It looks like a major pain in the arse! I'm doing this job tomorrow for a friend. Wish me luck!
It definitely was a pain in the arse, but if I had to do it again it would take half as long. Good luck!!
Very helpful (and entertaining)! This will reduce SOME suffering for other luders thank you sir
This was the worst, replacing this hoes is such a pain in the A$$. Thanks for the comment!
I just welded a 14mm wrench to a piece of flat 1" stock, left it long to break it loose, shortened it to get enough swing to tighten it. The hose is not really the right part, so the orientation of the sensor fitting and pump fitting are off. Needs longer screws and you will have to get under the prelude to play with your hose..
Ebay for parts or the junk yards! Honestly I can fit like 5 censors in my pocket lol they gonna junk it anyways. I just watched as the pick part in my area smashed TWO 1988 4WS Ludes . Both had perfect bodies and interiors! It was sad that they wouldn't sell me the entire car and wanted to charge per parts which for both cars they wanted over 15,000$... really d*mb business model considering I offered them 1000$ each.. pretty sad
Thanks for the video This job done by Honda would cost me 1100 cad this OEM part can cost up to 600 Cad or aftermarket like this is so much cheaper as like in this video and installation is nothing I can't handle myself, especially after watching this video thanks!
you are very welcome, the dealer prices are alway out of control. If you can do it yourself I would recommend to do so.
Just did this today and it was definitely a pain. Did you find a longer bolt to use? I don’t know exactly where to get one.
Yes I used a bolt from a IACV
@@MrJayDM Thank you
@@MrJayDM do you happen to know the proper size to get? I ordered one for a Honda iacv, but the diameter was too big.
I was waiting for the screws size??for the line that gos to the power steering pump..?
the bolts for the line that goes into the power steering pump are 10mm. I think the other end is a 12mm
tried this, i accidentally disconnected the bolt on the right... now i have to reconnect that stupid fitting and disconnect the other one
Sometimes I think it's Japan's way of getting back at us for WW2 lol
Seriously how many times is the space we need just a mm or 2 short to fit our fingers or hand? Or to get our arm at that certain angle to grab something but our elbow won't fit? ITS INSANITY lol
Why tf do u put ads mid vid
When you watch TV don't they have ads every 10 minutes including in the middle of the show. I make videos for people to watch and I hope they help. You and many others can watch them for free. The ads help me, motivate me to make more because I make a little bit of money from these ads. 80% of the ad revenue is going back into the videos. I'm sorry but not sorry that you are unhappy with me placing ads mid video like 90% of all other youtubers.
@@MrJayDM I don’t watch tv so idk what ads u talkin about and I use this fo music mainly and the channels I watch don’t really have ads my guy
@@MrJayDM plus yo video isn’t the clearest resolution nor did it help with replacing the high pressure power steering hose on my 99 accord so yeah dawg fuck yo ads 😈
@@MrJayDM but all in all I get what you doin g 👌🏽