This is class man. Can I ask - how are you having one control panel control 3 systems? Like when you switch the HDMI does the controller change system as well?
I know it's a long shot to get a response from a video made over a year ago... But what are you using as a switcher to swap from USB to HDMI all whilst using the same arcade controls?
Just bought a new house, close in the middle of August. Once I'm settled in there and have things setup we'll have a part 2! Plus I have another epic arcade to showcase!!
Wow,this is really good job!May i ask you please?the joystick that you use and buttons,it simple sets that i can buy them from ali?It compatible for nintendo switch?
This is really dope man! I love the design of it all. even the cup holder idea. If you could share how you set up the usb switch and hdmi that would be appreciated.
@@smartfixnc7625 You’re killing me smalls. It’s been 3 years so I’m guessing you’re over this by now. But this is amazing and the world needs an update.
I love the design and how clean everything looks. I've been looking into multi-console arcade cabinet mods and I was wondering if you had the design plans, and maybe hardware specs, because I found this design to be one of the best on youtube currently. But I'm really fascinated at how great it turned out!
Thank you! I do not have specific layout plans as this was honestly a "rough sketch build" that (surprisingly) came out great after a plethora of of touch ups/adjustments!
Hard to say honestly. It took me almost two years to build because I did it slowly and kept adding onto it. Started out as a retro only bartop, then turned into a full size multi console full-sized arcade. Best guess is $1000, minus the consoles and games. Heres my rough breakdown: Wood - $60 Paint - $30 Bondo - $10 27" 1080p monitor -$120 usb switcher - $40 hdmi switcher - $60 piano hinge - $10 logitech speaker/subwoofer system - $45 Sanwa buttons/sticks - $100 Marquee light $30 RGB lighting $50 smart power strip - $50 raspberry pi with power supply - $50 SD card - $20 Brooks UFB (controller PCB's that recognize XB1, N Switch, PS4, PC, Etc.) - $200 Random shit/tools needed - PRICELESS
and theres more than that, t molding, plexiglass, other paint (bezel), door handle (on the back, will be in next video), shelving, hardware (nuts, carriage bolts, screws glue, fasteners)
This is class man. Can I ask - how are you having one control panel control 3 systems? Like when you switch the HDMI does the controller change system as well?
Very nice, I might have to update one as well. Thinking of putting a mini fridge at the bottom
How did you go about routing the usb from the encoder to multiple consoles?
Can you share another video showing the inside and how everything is setup? Thanks!
Thanks! i have one coming soon! Ill be going over hardware and software and everything else,
Looks amazing. Great work.
Very cool arcade machine been watching this over and over for ideas how do you manage the heat in the cab ?
Dope this was what I was thinking of making. 2 players fight station (all fighter’s from ps2 and up)
One of the best I’ve ever seen. Awesome job!
How hard was this to make? I really wanna work on a project like this, but with my n64 and other Nintendo consoles!
Aquaticnauim it was a lot of work to be honest. Way more than originally anticipated. But most good things are! I’ll do a better video soon!
Man this is so cool. I love seeing stuff like this. Any way you can share measurements and schematics?
This is insane and I love it, this machine is awesome dude. Unbelievable, killer job 👍👏
This is very neat👌
Thanks for the kind words amigo!
I know it's a long shot to get a response from a video made over a year ago... But what are you using as a switcher to swap from USB to HDMI all whilst using the same arcade controls?
Wow thats awesom. When we getting a update on it. You have the details on how you made it with the measurements.
Just bought a new house, close in the middle of August. Once I'm settled in there and have things setup we'll have a part 2! Plus I have another epic arcade to showcase!!
@@smartfixnc7625 can't wait to see and cg on new house.
You deserve more view for all this hard work
Much appreciated my friend! Definitely a lot more work than you originally anticipate when preparing a project like this!
I think it’s bad ass bro!
Wow,this is really good job!May i ask you please?the joystick that you use and buttons,it simple sets that i can buy them from ali?It compatible for nintendo switch?
This is really dope man! I love the design of it all. even the cup holder idea. If you could share how you set up the usb switch and hdmi that would be appreciated.
Jessie W. I can! I’m doing to do a proper redo of this with some editing shortly. I’ve done some upgrades on it to.
@@smartfixnc7625 Any update?
@@smartfixnc7625 You’re killing me smalls. It’s been 3 years so I’m guessing you’re over this by now. But this is amazing and the world needs an update.
Dude wow make me one please.
How did you do multiple consoles with the joysticks
Really nice cabinet, how r those hdmi and USB buttons connect to change inputs?
There is a USB switcher and HDMI switcher, I wired the switch buttons on both of them to the top of the control panel with 20 gauge wire and solder
Hey, do you have one usb switch for each board? If not which usb switch do you use?
What switch did you use to switch between your consoles?
Whatarcade buttons did you do bro I just order some from Amazon iam making a pinball machine I love this cab I want to make this
Really dope!
seng2kx Thanks!
Love it omg
This is dope!
Thanks! So much fun to play
Smart Fix NC I want to built one but know know how to and where to start.
I love the design and how clean everything looks. I've been looking into multi-console arcade cabinet mods and I was wondering if you had the design plans, and maybe hardware specs, because I found this design to be one of the best on youtube currently. But I'm really fascinated at how great it turned out!
Thank you! I do not have specific layout plans as this was honestly a "rough sketch build" that (surprisingly) came out great after a plethora of of touch ups/adjustments!
Nice! Where did you get the beer holders? 😳
I got the cup holders from amazon. I used my vinyl cutter to make the mario and luigi logos and the beer quotes on the inside!
What hdmi and usb switch selectors did u use? I definitely need something like this.
This is awesome FYI. I have same consoles that I want to incorporate.
Do you have a link for those cup holders?
Hey in can you do a tutorial pleas
How much did this all cost you?
Hard to say honestly. It took me almost two years to build because I did it slowly and kept adding onto it. Started out as a retro only bartop, then turned into a full size multi console full-sized arcade. Best guess is $1000, minus the consoles and games.
Heres my rough breakdown:
Wood - $60
Paint - $30
Bondo - $10
27" 1080p monitor -$120
usb switcher - $40
hdmi switcher - $60
piano hinge - $10
logitech speaker/subwoofer system - $45
Sanwa buttons/sticks - $100
Marquee light $30
RGB lighting $50
smart power strip - $50
raspberry pi with power supply - $50
SD card - $20
Brooks UFB (controller PCB's that recognize XB1, N Switch, PS4, PC, Etc.) - $200
Random shit/tools needed - PRICELESS
And thats before including the vinyl cutter ($250), vinyl, nintendo switch dock, xbox one x, and all the digital games for both systems!
and theres more than that, t molding, plexiglass, other paint (bezel), door handle (on the back, will be in next video), shelving, hardware (nuts, carriage bolts, screws glue, fasteners)
Please sell them!!!
People will pay $400 or more
Nintendrew did a better job.... Still nice though
really? i honestly think this looks better
FALSE This is the best looking one on TH-cam
@@KINGSPYDAMUSIC no