Why You Need to Learn Weaving in Electric Welding

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 623

  • @weldHAGOJIBI
    @weldHAGOJIBI  3 ปีที่แล้ว +97

    막대기를 너무 오랜만에 잡아보는거라서 그런지 어색하네요. 부디 양해부탁드립니다. 형님들... ;)
    It's awkward because it's been a while since I've held a stick. Please understand brothers... ;)

    • @flatwater5
      @flatwater5 3 ปีที่แล้ว +5

      As always, very nice welding, Sir. Love your channel!

    • @atopep2022
      @atopep2022 3 ปีที่แล้ว +2

      Thanks for the video . It's very good vídeo congratuletions . Hi from valencia 🤪😝

    • @atopep2022
      @atopep2022 3 ปีที่แล้ว

      And tkankyou for you education

    • @브로맨스-f4w
      @브로맨스-f4w 3 ปีที่แล้ว +2

      무슨 차이인지 설명 좀 부탁드립니다

    • @WELDEROFMASTER
      @WELDEROFMASTER 3 ปีที่แล้ว

      Thanks you infomation brother 👍

  • @sammiller171
    @sammiller171 3 ปีที่แล้ว +18

    OK as a novice starting off very late in life that is the best most informative video that I’ve been looking for dealing with weaving, Just subscribed, that’s what I’m talking about somebody who actually knows how to show techniques in an intricate way

    • @de0509
      @de0509 3 ปีที่แล้ว

      I started late too. What works for me personally is to focus only on two things when weaving, make sure theres enough metal to fill every crevice and to stick to the exact same motion and speed from start to finish

    • @dorianobruintjes1902
      @dorianobruintjes1902 3 ปีที่แล้ว +1

      So what is the best technique? Straight forward, in circles or in diagnal lines? Cause i was thaught to do half moon shapes, but i dont see it here. So whats best?

    • @hnorrstrom
      @hnorrstrom 3 ปีที่แล้ว +2

      @@dorianobruintjes1902 I always do half-moons that's what I been thought here in Sweden. Never seen anyone doing these patterns

    • @endurojimmy3109
      @endurojimmy3109 ปีที่แล้ว

      ​@@hnorrstrom Me too, I am returning to welding as a retirement hobby after 35 years.
      I was taught in the UK and we were taught half moons.
      Maybe it's a European technique.

  • @danmoreton1788
    @danmoreton1788 2 ปีที่แล้ว +36

    It reminds me of when I was learning to weld and my son,(who is a welder) would be over my shoulder saying do this or that and each time I would learn another trick to weld a bit better. Great video!

  • @myungwol
    @myungwol 3 ปีที่แล้ว +8

    안녕하십니까
    지금은 방학중이지만 특성화고등학교에서
    전기용접과 티그용접을 배우고 있는 학생입니다
    처음에는 힘들었지만 유튜버님의 영상들이 많이 도움이 되었습니다 용접 영상 올려주셔서 정말
    감사합니다 앞으로도 계속 힘내세요

    • @myungwol
      @myungwol 3 ปีที่แล้ว

      혹시 실례가 안된다면 나중에 티그 연강파이프도 보여주실수 있으신가요?
      학교에서 연습하는데 어려워서 영상을 보고 참고하려고 합니다
      부탁드립니다

  • @ZACMEIH
    @ZACMEIH 3 ปีที่แล้ว +244

    И вот что это видео дало зрителю? Ничего
    Придет молодой, или не очень, человек за знаниями в области сварки, а все что получит - это какие-то жесты руками, ноль объяснений и три шва, которые на таком расстоянии от камеры выглядят одинаково.
    Если делаете подобный контент, то объясняйте суть ситуации. Расскажите о перемешивании металла сварочной ванны и для чего это нужно, объясняйте какие у вас электроды, почему такие и зачем вы выставили именно такой ток.
    Видео ни о чем. Больше вреда для новичков, чем пользы

    • @stuart207
      @stuart207 3 ปีที่แล้ว +1

      Thank you for explaining this. I own a welder and have never used it so thought this video would be useful.

    • @PeocTaT1
      @PeocTaT1 3 ปีที่แล้ว +7

      Полностью согласен.

    • @mrrock131019
      @mrrock131019 3 ปีที่แล้ว +14

      Согласен. Лично я вообще ничего не понял в этом видео.

    • @АлексейАлексей-ч1ф
      @АлексейАлексей-ч1ф 3 ปีที่แล้ว +3

      Logrem
      На сантиметровой толщине металла,плетение показать проще простого.даже молодой справится

    • @АртурСаныч-в1к
      @АртурСаныч-в1к 3 ปีที่แล้ว +2

      Он показывает, то, чему учат в начале сварочной практики, да не объясняет, это минус. Но хитрый, варит дугой назад. А напроход, зигзагом, спиралькой, это показано во всех справочниках

  • @fritzx7979
    @fritzx7979 11 หลายเดือนก่อน

    Ich bin selbst Schweißer und hab das über zwanzig Jahre gemacht. Es gibt immer Leute die ein großes Maul haben und meinen sie können alles besser.
    Ich sag's dir: nicht von denen entmutigen lassen, immer weitermachen. Auslernen tust du niemals dabei, hab Spaß beim Schweißen!

  • @YoungSavageOfficial
    @YoungSavageOfficial 2 ปีที่แล้ว +1

    that was a good ass weld, for the slag to come off that much is top tier

  • @peternahrgang2617
    @peternahrgang2617 2 ปีที่แล้ว

    Habe ich vor 40 Jahren so ähnlich gelernt, das ist wie Fahrradfahren, einmal richtig gemacht und weiter so. Für einen Laien schwierig durchzuführen, weil dann die Materialkunde fehlt.

  • @힘차게살자
    @힘차게살자 3 ปีที่แล้ว +4

    덮어놓고 위빙을 해선 안되고 모재와 용접봉이 녹으면서 용접부위에 용융된 쇳물이 제대로 용입이되는지 보면서 진행하는게 용접의 핵심입니다. 용접봉이 녹으면서 쇳물이 물결치며 나가는걸 볼수있으면 용접이 되는것이고 피복제가 녹으면서 부글거리는 용융액을 쇳물로 오인하면 용접이 안되는것이죠

  • @ПРАВДАВГЛАЗА-э5и
    @ПРАВДАВГЛАЗА-э5и 3 ปีที่แล้ว +40

    На толстом металле даже чайник сварит на отлично

    • @ДаниилАшихмин-ы9с
      @ДаниилАшихмин-ы9с 3 ปีที่แล้ว +3

      ПОВЕРЬ НЕТ! на личном опыте знаю)

    • @rustamsabitov7622
      @rustamsabitov7622 3 ปีที่แล้ว

      Тут нужно руку набить а на видео у сварнова руки треслись как с большого бадуна 😀

    • @АнтонМалыгин-к1н
      @АнтонМалыгин-к1н 3 ปีที่แล้ว +4

      @@rustamsabitov7622 знаю сварного у которого руки ходуном ходят ,а варит на отлично , так что это не показатель.

    • @ЯнРокотов-х1э
      @ЯнРокотов-х1э 3 ปีที่แล้ว +1

      Нужно начинать учиться на тонком, гнилом металле?

    • @АнтонМалыгин-к1н
      @АнтонМалыгин-к1н 3 ปีที่แล้ว +2

      @@ЯнРокотов-х1э нужно научиться прогревать ,проваривать ,а это шляпа на куске толщиной 20 мм

  • @ivanbriones9166
    @ivanbriones9166 3 ปีที่แล้ว +34

    I have just started learning to weld at a school ,but I’ve learned more with you than any of my instructors. Thank you so much, your welding is incredible sir ! I aspire to weld as great as you one day! Blessings my friend ! 🙏🏻

    • @jeepwk6.5L
      @jeepwk6.5L 3 ปีที่แล้ว +2

      Yikes 😳

    • @trueaussie9230
      @trueaussie9230 3 ปีที่แล้ว +7

      Precisely WHAT did you learn from this video!?
      Clearly I've missed something.

    • @mr.nobody68
      @mr.nobody68 3 ปีที่แล้ว +1

      If you're learning more from TH-cam than a school, then the school is ripping you off, and the instructors are either incompetent or don't give a fuck.
      Drop out and find a better school

    • @300-33
      @300-33 2 ปีที่แล้ว

      приборы

    • @CurbJesus
      @CurbJesus 2 ปีที่แล้ว +3

      @@trueaussie9230 this video demonstrates proper pooling of the bead.

  • @victoryfirst2878
    @victoryfirst2878 3 ปีที่แล้ว +9

    Your welding is pretty good fella. What I am wondering is if you would explain which method used has what specific characteristics on depth and width of penetration. Thanks

  • @СтаниславКовалев-ы2к
    @СтаниславКовалев-ы2к 3 ปีที่แล้ว +83

    Хотелось бы всё это увидеть на деталях толщиной 1,5-2 мм.а 10мм сварить ума много не надо....

    • @Tolasik
      @Tolasik 3 ปีที่แล้ว +6

      Вот вот.я пробовал на метала мм 10.ванну видно шов супер.на тонком метале не видно ничего

    • @Pan6989
      @Pan6989 3 ปีที่แล้ว +2

      Вот именно

    • @КрасноеЗнамя-л4х
      @КрасноеЗнамя-л4х 3 ปีที่แล้ว +5

      Я не до*уя сварщик. А что собственно тут автор пытается рассказать?

    • @wagon_user
      @wagon_user 3 ปีที่แล้ว +2

      Что-то мне подсказывает, что тонкий металл так не варят)

    • @wagon_user
      @wagon_user 3 ปีที่แล้ว +4

      @@КрасноеЗнамя-л4х посмотри на ток и ореол вокруг шва. На первом максимальный ток и перегрев в зоне сварки. На втором и последнем соответственно меньше при большей ширине самого шва.

  • @JamesFBack
    @JamesFBack 2 ปีที่แล้ว

    i am a welder with 2 years of experience and i can give an advice for all 3 of these types of "layering":
    6013 can be defined as 2 in 1 (can be used like 6010 and 7018)
    unless you give a shit, then call it 6013
    going straight: that is literally what 6013 is used for.
    weaves: one of the best ways to hold two plates (or any metal) together. however, it takes practice in order to keep a "straight" line.
    circles: do NOT do this! your just sandwiching slag in between each layer.
    (don't believe me? try doing butt-plate like that as a cap and bend it, you'll see all the slag in between each layer come out.)
    all-in-all: 2 of the welds look great! your weave's look spot-on! but circles does not work well in any welds (unless your a shitty RV repair man, then go ahead).

  • @matthewbuttle
    @matthewbuttle 3 ปีที่แล้ว +14

    Your videos are short, well made and they get to the point 👍🏼

  • @justintoeverything
    @justintoeverything 3 ปีที่แล้ว +152

    This taught me (and I’m assuming everyone else that wasted 7mins of their life) absolutely nothing. Why do i need to learn weaving in electric welding? You didn’t even answer your own question

    • @trueaussie9230
      @trueaussie9230 3 ปีที่แล้ว +8

      ABSOLUTELY nothing!!

    • @mikec.8556
      @mikec.8556 3 ปีที่แล้ว +7

      weaving deposits more weld deposits but you're gonna need shit load of rods depending on the type of groove you're gonna fill

    • @trueaussie9230
      @trueaussie9230 3 ปีที่แล้ว +5

      @@mikec.8556 unless you're a fan of polished fancy bead patterns, you'll just have to grind it off anyhow. No?

    • @mikec.8556
      @mikec.8556 3 ปีที่แล้ว +2

      @@trueaussie9230 depends on specs call for .

    • @trueaussie9230
      @trueaussie9230 3 ปีที่แล้ว +9

      @@mikec.8556 understood. If the specs call for more than just securely joining 2 pieces of steel - ie an excess of welding material - then weave-welding is the way to go.
      I'm only an amateur welder but, as with any / all work I undertake, I like the end result to be as neat as possible.
      As an amateur, my understanding is that once the valley between the pieces is filled the result is as strong as if it were originally 1 piece.
      So I'm still at a loss to understand why / under what circumstances I might need to weave-weld.
      What benefits does weave-welding offer that 'clean' welding does not??
      Unfortunately I find 'professional' welders to be extremely reluctant to give up their 'secrets'.
      I'm coming to the conclusion they're afraid the world will discover that welding is not such a ''specialised skill' after all.

  • @ivo_7719
    @ivo_7719 3 ปีที่แล้ว +3

    The truth is that it is great that you start uploading videos of coated electrode, I follow your video a lot, greetings from Argentina!

  • @lenin_Stalin
    @lenin_Stalin 3 ปีที่แล้ว +2

    Где на практике может пригодиться такая сварка? У нас в России не варят стерильные пластины в нижнем положении. Как правило из земли выкапывают две пластины толщиной 60-70 мм, макают в солидол, делают разделку кромок шириной 1/10 метра, находят максимально толстый электрод, (за не имением оного арматурину) и варят на максимально возможном токе обычно 300-500а( обязательно нужно приговаривать про себя " ток ураганный - шов монолитный")

  • @veniceitalyvlog
    @veniceitalyvlog 2 ปีที่แล้ว

    You're hand is superb,

  • @angelaprater2679
    @angelaprater2679 ปีที่แล้ว

    The reason he showed you this is for different fill and weld, vertical, T weld, angle plate or pipe. Seen first comment of watching for 7 minutes.

  • @wkelly4963
    @wkelly4963 3 ปีที่แล้ว +42

    Not that I use stick welding common but it Is always good to maintain the skills. When I was having a exam for stick welding in my school time, I had beautiful welding but failed the questions 😅 I was so devastated... but got my diploma next time🤭 next some pipe welding and explain what kind of rods to use?

    • @2035jim
      @2035jim 2 ปีที่แล้ว +1

      I use stick welding more often then mig and tig welding for sure it sure comes in handy to know a good technique

  • @Native_love
    @Native_love 2 ปีที่แล้ว

    Magnificent! Bravo! Awesome! Beautiful! THANK YOU!!!

  • @gunterschone8402
    @gunterschone8402 3 ปีที่แล้ว +7

    Nice video.
    This is how it should be with electrode welding, the slag lifts and loosens by itself.

    • @kf8575
      @kf8575 3 ปีที่แล้ว +2

      Depends what type of rod it is, and what you're doing with it. Fillets on steelwork with iron powder rods for example, dont always peel, the slag often pops off in one piece. Or a pipe open root with a 7016 dcen, it clinhs to the weld and the preps, but comes off with a hand wire brush

    • @uncleputes
      @uncleputes 3 ปีที่แล้ว +1

      Try low hydrogen rods 🤣

    • @jetamorsolovideos
      @jetamorsolovideos 3 ปีที่แล้ว

      It applies only on thick materials

    • @de0509
      @de0509 3 ปีที่แล้ว

      Unless its the stainless steel rods that Ive used tho. Those things are a safety hazard. The metal cools and shrinks and slowly small bits of slag gets shot off the weld, and into your eyes

    • @jamesordwayultralightpilot
      @jamesordwayultralightpilot 3 ปีที่แล้ว

      @@de0509 lmao you know there's a smart-ass response to that one. "Where are your safety glasses?"

  • @therealspixycat
    @therealspixycat 3 ปีที่แล้ว +13

    Can you do a video on just one topic : reading the weld puddle when stick welding?

    • @jamesordwayultralightpilot
      @jamesordwayultralightpilot 3 ปีที่แล้ว +3

      (SECOND COMMENT) ...one side to the other. Adjust heat so the weld is almost flat when the bead is done that's when you know you got good penetration. It's literally all about practice. I watch behind the arc at the dim area where the puddle cools. If it looks like both pieces are cooling evenly and not more on one piece than the other then I don't adjust my circles or stick angle. But when you just start out, pay attention to that area and slightly change your method and see how it affects the cooling puddle.
      Problem with welding is people think they can study it and ask a million questions and it will just suddenly become clear to them. When in reality you just need to practice all day everyday and by the end of the week, you'll probably understand how to do it right.

    • @jamesordwayultralightpilot
      @jamesordwayultralightpilot 3 ปีที่แล้ว

      (FIRST COMMENT)Just practice. Don't get complacent and only try one method. Once you can build knowledge on what you were doing and how the weld turned out you can tweak your method. Just don't hold the rod too far from the material otherwise you get pinholes. Always lead the stuck across the joint, don't push the puddle. I've always had the best luck with small circles, just be consistent with them and the weld will be parallel from

  • @nickstoic2944
    @nickstoic2944 ปีที่แล้ว

    These are great welds, thank you for sharing. You make look so easy.

  • @317Deven
    @317Deven 3 ปีที่แล้ว +1

    I work on dock plates and all we do is stick welding in the field. This was nice.

  • @gandolph3
    @gandolph3 3 ปีที่แล้ว +2

    Thanks man. Nice beads.

  • @yananisawa
    @yananisawa 3 ปีที่แล้ว

    this vid is super clear on how to practice the move. thanks!

  • @jin-i9g3x
    @jin-i9g3x 3 ปีที่แล้ว +3

    한여름 더운데 고생하십니다.

  • @hubertdanek2311
    @hubertdanek2311 3 ปีที่แล้ว +1

    What is a diference between these 3 methods?

  • @viorsa8200
    @viorsa8200 3 ปีที่แล้ว +13

    Excelente proyecto muy bien desarrollado y mejor ejecutado , unos cordónes de soldadura magníficos , con diferentes técnicas , a cada cual mejor , gracias por compartir tanta información y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia ( España) 🤓 😜

  • @안전관리자D
    @안전관리자D 10 หลายเดือนก่อน

    According to thickness, it needs to adjust amperes. When performing elec-welding, just do it. If you wanna make a clear line.

  • @ChernovSanek
    @ChernovSanek 3 ปีที่แล้ว +9

    Название: Почему нужно учиться плетению в электросварке?
    Видео на этот вопрос не отвечает

  • @avionsullivan3096
    @avionsullivan3096 10 หลายเดือนก่อน

    What is the difference with using a Chinese 6013 rod vs a Lincoln 6013 rod ?

  • @tomthompson7400
    @tomthompson7400 3 ปีที่แล้ว +23

    Great video , yes its all practice , like most things in life really. But arc length is the real secret to master , after that the rest seems to fall into place easily.

    • @therealspixycat
      @therealspixycat 3 ปีที่แล้ว +2

      It would be very nice to see a video on just the arc length. People talk about it like Jody but never really explain it

    • @tomthompson7400
      @tomthompson7400 3 ปีที่แล้ว +3

      @@therealspixycat as a rule of thumb arc length wants to be the distance that the metal in the middle of the rod is ... adjust slightly to suit after that .. but that's my rough guide.

    • @TheAefril
      @TheAefril 3 ปีที่แล้ว +1

      @@tomthompson7400 Do you mean the welding stick core (just the metal instead of the metal with the flux coating) diameter?

    • @kf8575
      @kf8575 3 ปีที่แล้ว +1

      @@TheAefril yeah just the diameter of the metal core of the rod. Although with low hy rods, you need a shorter arc than that, ideally as short as possible without stubbing it out👍

    • @ТемарбулатНугманов
      @ТемарбулатНугманов ปีที่แล้ว

      Спасибо всем сварщикам, делящимися своим мастерством. Больших разводов или стёжек, вчера сварил электродами "лб, японские и есаб,ок 46. Отлично заварил большими стёжками свою дышловку на прицеп. И всё благодаря мастерству здесь на видео. Спасибо добрым людям, здоровья Вам всем. Наконец то я освоил этот большой шов.😊😉🙃🙂 в свои 58лет😅😂🙋

  • @Kopetgondol
    @Kopetgondol ปีที่แล้ว

    Tehnik yang bagus. Tank you

  • @dimaswicaksono7089
    @dimaswicaksono7089 3 ปีที่แล้ว +4

    thanks bro the video is very helpful

  • @irfanmaulana1020
    @irfanmaulana1020 2 ปีที่แล้ว +1

    om gimana caranya agar tidak gerak² tangannya, stabil gitu tangannya ga tremor

  • @beylerbeyitas4319
    @beylerbeyitas4319 3 ปีที่แล้ว

    Richtig gut und wenn es Anfänger sind und nicht verstehen sollen sie auch so oft wie möglich Üben ,
    du hast es auch gezeigt mit dem Strom Einstellungen für jedes Stil und am Ende auch die Unterschiede zum pendeln gezeigt warum es so aussieht wer das nicht begreift soll garnicht zum schweissen anfangen . Wer die grünt Kenntnisse hat der versteht es Danke für deine Mühen für das Video 👍🏽👍🏽👍🏽

  • @weldtechsolutions
    @weldtechsolutions 2 ปีที่แล้ว +1

    Lovely welding.. are you using 7018 rods 2.5mm? That’s what we use on our videos and the results come out lovely.

  • @apprendreasouder
    @apprendreasouder 2 ปีที่แล้ว

    Top la vidéo 📼 du travail de pro sujet clair précis

  • @heathhunter5306
    @heathhunter5306 3 ปีที่แล้ว +2

    So, at first, I disagreed a little bit, then I realized that it's 601x rod, not 7018, lol. 7018 is a bit different technique and behavior. It would not produce such a nice weld running that height/angle, and the asthetics would be off with those movements. For 60 series, these are very nice welds. Going to retry these next time I pick up some 6010, which is rare.

    • @jamesordwayultralightpilot
      @jamesordwayultralightpilot 3 ปีที่แล้ว

      My boss loves 6011 and mostly because It says they work with less than clean metals....so they never clean anything before they weld it and it shows...

  • @khaleeji_Decor
    @khaleeji_Decor 7 หลายเดือนก่อน

    Which tint glass is perfect? Can you please suggest

  • @chrisleyva8125
    @chrisleyva8125 ปีที่แล้ว

    it’s so that you can make a bigger weld and not small stringers, it’s also so you can deposit more metal into what ever your welding, for example I had a hatchet for work that had a wood handle that broke, so I grabbed an old metal hammer that I had and cut the head off so that I only have now is a metal handle, I grinded my metal handle and shaped it so that I can fit the handle in threw my metal hatchet head . On the side of the head and the Handle where I shaped it where nice and tight but I had big void at the top the widest part was about 1-1/2 “ and a stringer wouldn’t have filled that gap so I weaved it nice and slow so that I can deposit more Metal into my weld in order to fill the big gap and to also be able to do a one time pass without run more than one pass.

  • @fernandorivas4230
    @fernandorivas4230 2 ปีที่แล้ว

    thank you for showing your technics. very helpful.

  • @cersosi19
    @cersosi19 3 ปีที่แล้ว

    Weaving is actually frowned upon in most shops, stringers are the way to go.

    • @cersosi19
      @cersosi19 3 ปีที่แล้ว

      Oxy ace. Welding? That’s a tad different than tig mig stick

    • @cersosi19
      @cersosi19 3 ปีที่แล้ว

      @Ban this youtube also, not sure why they frown upon it, but I learned weaving in school for stick and when I got a job welding, they said not to do that. I have a cousin in pipe welding, whose welded for years and he said it’s called Texas weaving haha

  • @kliminzea
    @kliminzea 3 ปีที่แล้ว

    Tetap semangat, sangat luar biasa skilnya

  • @jarviscoleman7645
    @jarviscoleman7645 3 ปีที่แล้ว

    Love watching welding.

  • @hdmi3694
    @hdmi3694 ปีที่แล้ว

    nice to say what rod your using 7018? 6010? 6013?

  • @omohmuslimah8036
    @omohmuslimah8036 3 ปีที่แล้ว

    Ini baru ttrial yg plg jls.mks

  • @dan-xl4mg
    @dan-xl4mg 3 ปีที่แล้ว

    Are you using rubber handshakes while welding if I may ask?

  • @vital125.
    @vital125. 2 ปีที่แล้ว +1

    Кольцами варю обычно, когда надо заполнить большой вертикальный зазор

  • @baldomrocortes6636
    @baldomrocortes6636 2 ปีที่แล้ว

    Very good example 💯

  • @charlessimonjr3414
    @charlessimonjr3414 3 ปีที่แล้ว

    beautiful no words nice work

  • @pakmudecrew
    @pakmudecrew 3 ปีที่แล้ว

    Good vidio welding with electroda 6013 👍

  • @tonyperez9089
    @tonyperez9089 3 ปีที่แล้ว +1

    What electrode diameter and type is it 6018 my guest?

  • @bimokonstruksibaja
    @bimokonstruksibaja 3 ปีที่แล้ว

    Editnya pake apa boss bisa jelas apinya.

  • @아무개-u6d
    @아무개-u6d 2 ปีที่แล้ว

    전기용접에서의 위빙은 현장에서의 전류 상태, 용접기의 상태에 따라 아크가 불안정할때 사용하기도 하고 동영상에 나온 일정한 움직임의 위빙을 할때는 모재의 성질에 따라 달라집니다. 특히나 전기용접의 경우 용접봉의 종류에 따라 위빙하는 방법이 천차만별입니다. 모재나 용접봉마다 열전도율, 용접법이 다르기때문입니다. 때로는 후처리작업을 줄이기 위해서 사용하기도 합니다. 티그, 이산화탄소나 질소용접등은 전기용접에 비해 아크가 안정적이기에 그 성질이 다르다고 생각합니다.

  • @billklingon6806
    @billklingon6806 3 ปีที่แล้ว

    Weaving is useful when filling in gaps or buttering but results in excessive heat input. Navy code requires stringers so it is is imperative you learn stringers.
    I am still a novice so this is just an opinion.

  • @frankkante7850
    @frankkante7850 3 ปีที่แล้ว +1

    Yeah, Electo Welding. love it

  • @eseerreka4738
    @eseerreka4738 ปีที่แล้ว

    Hola, consulta, tienes videos de esos mismo pero en diferentes posiciones que me dejes para verlo? Muy bueno tu contenido, saludos !

  • @Weldinginlove
    @Weldinginlove 2 ปีที่แล้ว

    Very nice video 😍👍

  • @fdyjt
    @fdyjt ปีที่แล้ว

    3th one is the most difficult one but looks veryy nice

  • @jokinsocampo3998
    @jokinsocampo3998 ปีที่แล้ว

    What welding rod you use?

  • @carakreatif24
    @carakreatif24 2 ปีที่แล้ว

    I like the tutorial 👍👍👍👍

  • @dewaynehickman4996
    @dewaynehickman4996 3 ปีที่แล้ว

    In this video the welds are done with a 7018 rod. Old school welders call 7018 rods "drag rods" you do not need weave them. They rods weave themselves as you drag the rod.

  • @dareiousacepanganiban3055
    @dareiousacepanganiban3055 3 ปีที่แล้ว

    I have a quesTion sir. . Why the color get darker as shown on that vlog...

  • @guypannetier7424
    @guypannetier7424 2 ปีที่แล้ว

    Superbe video, sans commentaire, très explicite. J'ai beaucoup appris; MERCI!

  • @soc2924
    @soc2924 3 ปีที่แล้ว +1

    아크로 배관파이프 빽넣는것좀 알려주세요.티그+아크이거나 티그 +co2로 배관 파이프 하는것도 올려주시거나 아크로 빽내고 아크로 돌리거나 co2로 빽내고 배관 니꾸채우는것도 올려주세요.궁금하네요.보고싶습니다.

  • @CarlosHenrique-kg7qs
    @CarlosHenrique-kg7qs 2 ปีที่แล้ว

    O filé da goiaba! Parabéns!

  • @황다영-i7j
    @황다영-i7j 2 ปีที่แล้ว

    아크 용접시 위빙을 빙글빙글 돌려서 하는게 가장 좋다는 말인거죠?

  • @neroserpent7796
    @neroserpent7796 2 ปีที่แล้ว +1

    А с каких пор колебательные движения называются плетением?

  • @abimaelbustamante7053
    @abimaelbustamante7053 3 ปีที่แล้ว

    It's the penetration that counts the flux capa a pretty pass is nice but theyre not always the strongest.

  • @luismoreno4927
    @luismoreno4927 ปีที่แล้ว

    That 6013 has a formula very different than my first Lincoln.

  • @pipefitters
    @pipefitters 2 ปีที่แล้ว

    Excellent

  • @paul5961
    @paul5961 2 ปีที่แล้ว

    GREAT STUFF

  • @engineeringsolutionsengs6823
    @engineeringsolutionsengs6823 2 ปีที่แล้ว

    Good work bro

  • @wemcal
    @wemcal 2 ปีที่แล้ว

    Great video

  • @5jongsik
    @5jongsik 3 ปีที่แล้ว +2

    진짜 올려주셨네 잘 보겠습니다.

  • @woutmoerman711
    @woutmoerman711 3 ปีที่แล้ว

    So it is 6013 at around 100 amps, but what is the rod thickness? And is this DCEP or DCEN?

  • @social3ngin33rin
    @social3ngin33rin 3 ปีที่แล้ว

    I'm still slightly confused after watching.
    So the different methods leave different sized gaps and depths?

    • @hnorrstrom
      @hnorrstrom 3 ปีที่แล้ว

      I'm confused also, I welded 100's of kilos of sticks and this video don't provide any info what so ever.

  • @lonewolf-qy4un
    @lonewolf-qy4un 2 ปีที่แล้ว

    Those are excellent welds but if you just sit the rod in there and watch the puddle and move accordingly it’s the same result aka stringers

  • @vishnuchandrabahadur9398
    @vishnuchandrabahadur9398 ปีที่แล้ว

    Wow very nice

  • @리얼라이프-h7u
    @리얼라이프-h7u 11 หลายเดือนก่อน

    전기용접에 위빙을 하는 이유가 뭔가요?

  • @cjcourter1477
    @cjcourter1477 3 ปีที่แล้ว

    You could also do the half moon, works just as good

    • @jamesordwayultralightpilot
      @jamesordwayultralightpilot 3 ปีที่แล้ว

      ((((((((((((((((((((((( ......right?
      Not: UUUUUUUUUU
      I've always alternated depending on what works best. Sometimes it really feels like one works better than the other.

    • @cjcourter1477
      @cjcourter1477 3 ปีที่แล้ว

      @@jamesordwayultralightpilot Yup ((((((((((( but that's what I use for cap welds, gives a nice look, I also point the tip away from the weld and not towards it, helps push impurities away from the weld. Instead of pulling your bead you would be pushing it.

    • @jamesordwayultralightpilot
      @jamesordwayultralightpilot 3 ปีที่แล้ว

      @@cjcourter1477 cool I always remember what others say when I'm working. Helps to have wise words to follow in the moment.

  • @shaya5680
    @shaya5680 3 ปีที่แล้ว

    Excellente vidéo c'est claire et limpide

  • @armandogeorge192
    @armandogeorge192 2 ปีที่แล้ว

    What electrod do u use?6013 or 7018?

  • @fabricepoulain02
    @fabricepoulain02 3 ปีที่แล้ว

    Excellente vidéo. Merci du partage

  • @ПостороннимВ-в1п
    @ПостороннимВ-в1п 3 ปีที่แล้ว

    Спасибо за труды

  • @WvMnts
    @WvMnts 2 ปีที่แล้ว

    Explain the rods and why different welds would have been great

  • @융9강
    @융9강 3 ปีที่แล้ว +6

    이 분은 티그뿐만 아니라 막대기도 잘 하시네… 혹시 가능 하시다면 알루미늄 스풀건도 올려주세요 👍👍

  • @КостяКулачихин-у6х
    @КостяКулачихин-у6х 3 ปีที่แล้ว

    Третий способ мне не нравится. Уж больно шлака много перетикает в сварочную ванну. Подскажите, почему аппарат так плюëтся? У меня на инверторе примерно столько же искр и окалин как на видео, но до ремонта таких нареканий не было

    • @egorlitvinenko1203
      @egorlitvinenko1203 3 ปีที่แล้ว +1

      Току много, св вана кипит и брызжет

    • @КостяКулачихин-у6х
      @КостяКулачихин-у6х 3 ปีที่แล้ว

      @@egorlitvinenko1203 спасибо. Кстати заметил такую деталь, что после ремонта выставляеш ток на диаметр 3мм, а это даже для 4мм многовато будет

  • @kimchiwelder8410
    @kimchiwelder8410 3 ปีที่แล้ว +13

    스틱 전기용접도 잘 보았습니다.
    3가지 위빙방법을 한 플레이트에 모아서 보게되니
    위빙에따른 비드결 차이를 확인하기 더 쉽고 보기가 좋네요
    항상 좋은영상 감사 드립니다👍👍🔥🔥

  • @siniro15
    @siniro15 3 ปีที่แล้ว +8

    고산화티탄계여서 그런지 세 가지가 별 차이가 없어보이네요..

  • @하나만-i3l
    @하나만-i3l ปีที่แล้ว

    일반인입니다. 그래서차이가 뭔가요?
    용접한후 나타나는 모양차이인가요?

  • @leonardpearlman4017
    @leonardpearlman4017 3 ปีที่แล้ว +1

    OOOh! "Slag Peel"! We love that. I was very much wondering about the type of rod! People don't like 6013 here so much, but they aren't getting the beautiful bead and clean slag release that we see here. Are these Korean welding rods? ESAB? I got some from India online that behaved very well, and gave clean results, but not like this.

  • @mabus7458
    @mabus7458 2 ปีที่แล้ว

    Dragging the bead?

  • @litioamatista2086
    @litioamatista2086 3 ปีที่แล้ว +3

    Al buen entendedor pocas palabras :) gracias por el video nunca pensé en disminuir o aumentar el amperaje al estar trabajando.

  • @전현철-i2j
    @전현철-i2j 3 ปีที่แล้ว +11

    티그뿐 아니라 다양한 분야에서 실력을 보여주시네요.
    용접기술은 예술, 학문과 같아서 끝이 없어 보입니다.
    용접자세와 전류,전압, 모재, 필러금속의 재질과 피복성분에 따라 다양한 변수가 있어니 위빙도 간단히 정의하기 힘들 겁니다.

    • @AloysiusOHare-fk4yq
      @AloysiusOHare-fk4yq 11 หลายเดือนก่อน

      And let's not forget the placement of the grounding clamp!

  • @ahmadqiva4243
    @ahmadqiva4243 2 ปีที่แล้ว

    Tanya bang??
    Udah pernah ngelas pipa??