То есть. Вместо того,чтоб взять кусок проволоки,гвоздь,шайбу или просто электродом на малом токе наплавить, вы предлагаете ухайдохать электроды для такой операции? 500 полуляхов из двухсот пятидесяти.
I'm welding all processes for over 30 years now. Honestly this is wasting time and energy. If you want to close a hole or gap, just use another rod in your other hand as a filler as if you are brazing or like welding Tig/ argon. This way you still have the slag for a sound weld. Actually this video method will give you hell when trying to tack that rod to the other.
I've never worked in any kind of workshop or in doors for that matter. I find these kinds of programs interesting and informative. Thank you for sharing.
These vids by these no name welding channels should be considered a tutorial on HOW NOT TO WELD! They basically teach technics that any weld instructor will slap you upside the head for trying
Please heed the advice of the other reply to your comment. These videos are not a good example of proper or effective weld techniques. If someone ever has to grind that much after they finish welding, I guarantee you their weld is a trash heap. A weld doesn’t have to be pretty but it needs to be prettier than poo and hold up if tested and I am certain the welds in this video would not pass. I do think it’s cool that you have an interest in these things though so don’t give up on looking for useful videos that can give you better examples and then when you’re ready grab your torch and get to welding. 😊
Ещё в СССР медную проволоку мотали на электрод и варили чугунные блоки двс, кто сделан в СССР, тот поймёт, я по сей день так делаю, это 100 %рабочий метод
Querido Angel usted es un hombre muy virtuoso e inteligente y le agradezco mucho tanta ayuda y enseñanzas que nos brinda muchas gracias de todo corazón
Querido amigo, no tomes el consejo de este vídeo. Estas soldaduras son malas y no aguantarían. Solo usa un segundo relleno en la otra mano. Será más preciso. Asegúrate también de que tu superficie de soldadura esté limpia.
Выпендреж 1 это не удобно, потому как дуга прыгает от 1 ко 2му электроду. И согласен с большинством заварить можно и без ничего, на худой конец просто проволоку взять в руку и не мешает и процесс контролируется, знаешь сколько подать э.
Смотрел этот бред и диву даёшся есть наковальня берёш электрод и бьёш им по наковальне всей плоскостью секунды и чистый. А пока всю фигню он делал, я ужэ бы заварил одним электродом.
I have welded for 25+ years & have also used 6011 rod & nickel rod to accomplish the same results. Rarely have I chipped off the flux on any rod. I have never had to use fill rod for arc welding. I dont mean to be negative, but as long as you are having fun. Your video did grab my attention. Thumbs up
@@speedbuggy7240 There's not enough flux to properly shield both electrodes and it eats up a lot of the heat you need to get penetration into the base material. This is why buildings collapse in 3rd world countries.
Во первых не "Пайка" - а "Наплавка". А во вторых - пока ты зачищаешь электроды или подготавливаешь по длинное прутики - я уже успею 20 таких отверстий простыми электродами заплавлю. Так что - извини - но заново велосипед изобрести у тебя не удалось. А если по чесноку - то сейчас это делают намного быстрее полуавтоматом. Включил - наплавил - выключил - делов на 5 секунд.
That is just wrong. The welds are FLAWED! The time you need to prep for that "technic" takes too long. Also, the flux is not there for nothing. It's protection for the weld to ensure a propper FUSION of the base metal with the added metal (the weld). Your welds are full of holes (pores), which are DEFECTS!
I've an old shop teacher who would take one look at those welds and instantly fail you. For him, It did not matter what you welded, you still had to do it right.
If you're trying to fill a gap that wide it won't be as strong as it could be if the part was originally fitted properly. There are ways to disguise the improper weld and for most applications it will last forever. But if you have to make a badly fitted joint work this technique is about as good as you will find.
Great way to get porosity into your welds. It' will work to fill a hole, but, don't do it if any kind of quality standard is necessary. You can see porosity in the first example easily.
Do not do this if you need a weld to be strong! Any tradesman proud of his craft knows that using sabot rods will FAIL ex-ray every time. Inclusions, porosity, cold lap, lack of fusion what a nightmare!!
You could also use a bigger rod or do multiple passes. The flux isn't there just to have something to chip off after welding. It's there to help make a sound weld.
Ever heard of Texas tig? You use a stick electrode as the arc, and a filler rod, or another stick rod without flux to put even more material the same way you would as tig welding. Kinda common on badly fit joints with huge gaps
By the time you have chipped off the flux,sanded the rods down and tacked them together. I've burned 10 rods without any defects! Everyone is a welder till a real welder turns up!
I’m not a very good arc welder, but I gas weld quite good and for a time reference I’m over 60 . When I was a young kid my grandfather told me stories about when he worked around boats in the shipyard that this was a common practice . My guess was that was in the 30s 40s maybe even into the 50s when he had his fishing boat .
I remember taking 6010 and 7018 rods (still coated) and essentially using them like TiG filler rods when I was dicking around in welding school. managed to lay some pretty nice looking fat welds but I have no idea if there was proper fusion or not.
There's basically no chance you had proper fusion. It's like welding vertical down with 7018, the weld face looks pretty but it's full of slag and pores underneath.
É possível fazer êste trabalho perfeito com o eletrôdo normal. No último exemplo a superfície foi extremamente lixada para suprimir os defeitos da solda, que houve desgate demasiado da superfície, alterando a medida de espessura da peça. Êsse método não é recomendado, por não oferecer total segurança e eficiência. Coisa de gênio amador.
Человек вам показывает, ни как проще, а как качественно это сделать. Таким способом, валы наплавлять ништяк, после проточки, раковин не будет. Для начала, попробуй заплавить отверстие, чтоб после проточки, раковин не было, а потом говори, что проще
It would be better to either use TIG or a proper sized stick. This is going to be an unsafe garbage weld with lots of porosity. Would never pass x-ray or bend testing
I have been welding for 40 years I don't tack weld rod to another I start my weld then use the other rod and use it as thoe I was tig welding works great saves time
This method can cause flux entrapment in the weld, prevent a proper weld envelope, weld porosity microcracks and weld arc pulling to one side and/or with a high current than required, the electrode is melting/burning and not welding to get a Mechanically sound weld. Better using a big size electrode for a good outcome.
O revestimento de um eletroldo só em poça de fusão não vai tirar a emprureza contida no ar do eletroldo sem revestimento, ou seja pra tampar furo da certo, mais para uma solda resistente e de boa qualidade onde pode se obter força, jamais faria isso usaria uma bitola de eletroldo maior
I would always just use an extra one like I was tig welding. I of coarse beat all of the Flux off from it 1st. Your way looks like it would be easier though. Cool beans dude. ✌
Скорее такие дилетанты, как я. Знаем, где включается сварочный, как ток регулировать, где держак, а где масса, и всё на этом.😁😁😁 А как варить вот по таким роликам учимся.
I have used a similar but simpler method for years. If you use 6011 rod it works with the coating on. You don't have to weld the rods together just hold one rod in a gloved hand. Make sure you have a glove on. Set up the other rod as you normally would. Use that rod as a torch. Usually a pushing action works best. Hold the other rod like you would for gas or tig welding. it's the filler but also controls the heat. Using this technique you can quickly fill holes or weld the end of a pipe shut. It should be noted that welds bridging such large gaps are considered sub standard in many applications.
Thanks I'll have to try it.👍🏼 I usually use a gas welding wire with my mig welder to fill in gaps. I'll have to try it your way with the arc welding rod.
@@lukewarmwater6412 happened to me too.... was doing a gate repair and didnt have access to heavy enough rods, so Texas tig it was. Had a little thin spot in my glove and got LIT UP.
Metoda starsza od węgla.Dziś już nie trzeba kombinować jak kiedyś.Teraz technika spawania jest dużo lepsza .Wystarczy przemyślany zakup sprzętu i obejdzie się bez kombinacji
@@PavloKeba , нет это сварочная проволовка, она обмедненая. Но тут вообще неясно к чему он ПРИСАДКУ к электроду прихватывал. Дуга будет бить то от электрода то от присадки которая будет склонна залипать. Таким макаром обплюешся заливать. В крайнем случае примотал бы проволочками если уж вторая рука, скажем, ананизмом занята.
The end product was definitely not the same as the hole he plugged. Save yourself the 30 minutes of having to wrestle a grinder and use multiple passes to keep a relatively flat surface so you don't have to spend too much time cleaning it
В чем смысл использования обычного и голого электродов? А если просто двумя электродами варить - наплавлять? Для ускорения наплавки без всякого геморроя, обычно просто сварочную проволоку как при газовой сварке добавляют! В некоторых случаях (для наплавки и приварки броневых листов) использовали большие токи и связывали в пачку по 3-6 электродов.
@@user-qw5os4ed7f причём тут шайба? Куда ставить, что ставить? У меня бля спросони фантазия не работает. Потому что считает вариат с шайбой очень тупой. Ну в том варианте в котором я в уме представил. Ты же не обьяснил
Sou soldador à bastante tempo, nunca tinha visto isto não, acredito q seja somente pra apresentaçao, penso q inspetor nenhum permitirá q faça isto numa obra não, muito bem feito, ficouotima a fusão, parabens. 👍👍👍👋👋👋
JOSE SILVA , TUDO BEM ?! SABE , EU TAMBEM SOU SOLDADOR A MUITO TEMPO , E NUNCA TINHA VISTO ESSE SISTEMA , LOGICO E CASEIRO . MAIS BEM ESSE EFEITO E PARA PREENCHIMENTO . QUANDO EU FAZIA ESSE TIPO DE SERVIÇO , UTILIZAVA UMA VARETA DE FERRO DOÇE , BITOLA DE 5 OU 6 MM. ; PEGANDO COM UMA MÃO E A OUTRA NO ALICATE DE SOLDAGEM . E COMO FALOU O MINEIRO : PRA FAZER GAMBIARRA 😂😂😂
@@alfredonunez1751 Oiiii ! Boa tarde !!! Falou em gambiarra e já lembrei eu essa semana passada fazendo essa com eletrodo de 2,5 mm e na outra mão um a barra lisa redonda de um 1/4" aço 1020 preenchendo o vão de uma chapa de 1/8" ! (Era de uma churrasqueira feita na correria em plena quarta feira para levar pro mato em um piquenique, gambiarra de última hora ! 😅🤣🤣🤣🤣🤣👍🏼)
KKKKKKKKKK , A COISA E REMEDIAR , NE ? 👍👍👍 JA FIZ DESSAS . UMA VEZ TINHA ACABADO DE FAZER UM REBOQUE EM CHAPA 26 ' , E DEI MEIA VOLTA COM O ALICATE DE SOLDA NA MÃO E TROOECEI NO CABO DA SOLDA , E O ELETRODO ENTROU NA LATERAL DO REBOQUE ... AI JA SABE O QUE EU TIVE QUE FAZER , NE ? 😂😂😂
I had a big gap to fill on the bottom of a 24 inch pipe joint(lousy pipe fitter), I mean a big gap. Biggest rod I could get my hands on was 1/8” 7018. So I simply held the stinger in one hand and another rod in the other. Ran the weld kind of like a tig weld. Worked fine.
In my opinion this is only an interesting job for laymen in the field of Welding. If you use two 2.5mm rods (one coated and the other not, you will simply have a deposit with the possibility of greater porosity, as with a smaller amount of slag (deposit protective husk) there is a greater possibility of porosity due to the greater inlet. So if you put two 2.5 rods together to do this job, it's much simpler and more practical for you to use just one 4.0mm rod, where your welding machine will work with a lower amperage and you won't have all that immense work in having to keep peeling Electrodes. P.S. I have been working with Welding processes for 25 years
@@markcarolino9908 Even if they don't have bigger rods there is other processes which is far better work practices than what he did. You try to be a little bit professional, not yard shit
Been doing that little trick for 50 years, only we just knocked the Flux off the so called filler rod and fed it in by hand when it was called for. Same with tig, tack the ends and middle together for larder pipe, Say 3 and 4 inch but be careful of cold capping.
This just reduces the ration of flux to filler metal, I suspect that the welding pool isn't fully protected from the atmosphere during the process, this make no sense
Flux is important to get a good weld and each rod has the right type and amount of flux on it. You can't mess around with this. That guy hasn't a clue.
То есть. Вместо того,чтоб взять кусок проволоки,гвоздь,шайбу или просто электродом на малом токе наплавить, вы предлагаете ухайдохать электроды для такой операции? 500 полуляхов из двухсот пятидесяти.
А шлак не отбивают разве после каждого прохода?
Мы не ищем лёгких путей 😂😂😂
Шедевральный ответ!
Ахаха точно
Видимо если взять кусок проволоки, то руки трясутся после бодуна.
I'm welding all processes for over 30 years now. Honestly this is wasting time and energy. If you want to close a hole or gap, just use another rod in your other hand as a filler as if you are brazing or like welding Tig/ argon. This way you still have the slag for a sound weld. Actually this video method will give you hell when trying to tack that rod to the other.
Wow!! Thanks for this I am defintely going to use this.
100% facts. Ive only been welding for maybe 5 years and had the same thoughts about this.
На 100% согласен с вами.
Yeah...what code is that??
ๆๆ
I've never worked in any kind of workshop or in doors for that matter.
I find these kinds of programs interesting and informative.
Thank you for sharing.
These vids by these no name welding channels should be considered a tutorial on HOW NOT TO WELD! They basically teach technics that any weld instructor will slap you upside the head for trying
Please heed the advice of the other reply to your comment. These videos are not a good example of proper or effective weld techniques. If someone ever has to grind that much after they finish welding, I guarantee you their weld is a trash heap. A weld doesn’t have to be pretty but it needs to be prettier than poo and hold up if tested and I am certain the welds in this video would not pass. I do think it’s cool that you have an interest in these things though so don’t give up on looking for useful videos that can give you better examples and then when you’re ready grab your torch and get to welding. 😊
250 полулях из 250, можно просто электродом заварить и не ломать электроды для этого
Ну так будет не интересно же)
здддрасссстттеееее
ГЛАЗАААА!!!!
@@Homo-Sapiens.1
прибор сгорит, 20 лямов просмотров.
Ещё в СССР медную проволоку мотали на электрод и варили чугунные блоки двс, кто сделан в СССР, тот поймёт, я по сей день так делаю, это 100 %рабочий метод
А ещё перед тем как чугун варить грели хорошо
@@iiiram2621 организм ,,грели" обязательно))
@@20kit10 🤣😂👍
я так делал! видос есть у меня!
@@dimooonz я знаю, видел
Querido Angel usted es un hombre muy virtuoso e inteligente y le agradezco mucho tanta ayuda y enseñanzas que nos brinda muchas gracias de todo corazón
Querido amigo, no tomes el consejo de este vídeo. Estas soldaduras son malas y no aguantarían. Solo usa un segundo relleno en la otra mano. Será más preciso. Asegúrate también de que tu superficie de soldadura esté limpia.
Destilando o Mundo,
Espetacular seu vídeo!
Alexania | Goiás
BRAZIL
Выпендреж 1 это не удобно, потому как дуга прыгает от 1 ко 2му электроду. И согласен с большинством заварить можно и без ничего, на худой конец просто проволоку взять в руку и не мешает и процесс контролируется, знаешь сколько подать э.
Why not just move up to a 5/32 6013 electrode??? Or for flat welding, just use 1/8” or 5/32” 7024 and prepare to lay down a boat load of metal.
Because maybe he doesn’t have 5/32 rod
@@mattharper588 That’s what I was thinking to, or maybe this person lives in a third world country where supplies are limited.
@@rtimusprime1666 or... you brain 🧠 is limited?
@@khytzu Possible, but highly unlikely.
И зачем это нужно? Просто эллектородом без этих заморочек 3 секунды заварить🤦♂️
Смотрел этот бред и диву даёшся есть наковальня берёш электрод и бьёш им по наковальне всей плоскостью секунды и чистый. А пока всю фигню он делал, я ужэ бы заварил одним электродом.
@@user-co2fw7ym6l странно, что он сразу три электрода отбивал, а не по одному
@@VNDRXW тут все странно, включая способ.
I have welded for 25+ years & have also used 6011 rod & nickel rod to accomplish the same results. Rarely have I chipped off the flux on any rod. I have never had to use fill rod for arc welding. I dont mean to be negative, but as long as you are having fun. Your video did grab my attention. Thumbs up
I'm going to welding school right now and you'd fail the entire semester if a teacher caught you doing this.
@@BillyWitchDoctorDotCom I don't think he really cares.
@@BillyWitchDoctorDotCom There are a lot of things you're not allowed to do in school, but in real life what ever it takes to get the job done...
@@speedbuggy7240 There's not enough flux to properly shield both electrodes and it eats up a lot of the heat you need to get penetration into the base material.
This is why buildings collapse in 3rd world countries.
Если нужно просверлить дыру большего диаметра чем есть под рукой, то он долго не думает......просто поставит два сверла и вперед
Дам замечание дыра бывает у бабы между ног , а все остальное ОТВЕРСТИЯ
Старый дедовский метод. Работает на 100%
НУ УМОРИЛ , МОЛОДЕЦ. ПОХЛЕЩЕ ЧЕМ ЭТОТ ЧУДИК С ДВУМЯ ЭЛЕКТРОДАМИ.
@@jestkiy960 моего деда учил его дед, а деда деда, ну сам понимаешь
Просто проволоку возьми в одну руку ,а второй вари электродом .Сделай по больше ток.Сечение дуги у электро сварки позволяет варить с присадкой
отличный способ убить время и перевести пару кг электродов .
Ótima ideia gostei
Boa tarde feliz ano novo pra vc e todos da sua família
Мало кто знает этот трюк. Этот трюк знают не только лишь все. Это видео напомнило мне как суп из топора варили.)
Я такой х.йней занимался, когда не чего бьіло делать на практике в ПТУ.
Descubriendo el agua caliente 🙄
Во первых не "Пайка" - а "Наплавка".
А во вторых - пока ты зачищаешь электроды или подготавливаешь по длинное прутики - я уже успею 20 таких отверстий простыми электродами заплавлю. Так что - извини - но заново велосипед изобрести у тебя не удалось.
А если по чесноку - то сейчас это делают намного быстрее полуавтоматом. Включил - наплавил - выключил - делов на 5 секунд.
Согласен! Хуета полная! Пусть ещё в качестве ноу-хау медной проволокой электрод обмотает... Нормальный сварщик всё это уже давно съел и высрал!
Я вот тоже не понял для чего и какую роль тут играет медь???
@@Svoi59 гугл в помощь!
@@Svoi59 чугун походу варил.
That is just wrong. The welds are FLAWED!
The time you need to prep for that "technic" takes too long.
Also, the flux is not there for nothing. It's protection for the weld to ensure a propper FUSION of the base metal with the added metal (the weld). Your welds are full of holes (pores), which are DEFECTS!
👍
The Flux also contains alloying elements needed for mechanical properties. This practise is therefore not recommended.
I've an old shop teacher who would take one look at those welds and instantly fail you.
For him, It did not matter what you welded, you still had to do it right.
If you're trying to fill a gap that wide it won't be as strong as it could be if the part was originally fitted properly. There are ways to disguise the improper weld and for most applications it will last forever. But if you have to make a badly fitted joint work this technique is about as good as you will find.
Only in america other countries have to weld any way they can
Great way to get porosity into your welds. It' will work to fill a hole, but, don't do it if any kind of quality standard is necessary. You can see porosity in the first example easily.
У меня вопрос только один. А нахрена так извращаться и усложнять работу?
250 полуляхов из 250 😂
Eu sou soldador há mais de 30 anos e não sabia, vou tentar colocar em prática aqui...
🇧🇷
Do not do this if you need a weld to be strong! Any tradesman proud of his craft knows that using sabot rods will FAIL ex-ray every time. Inclusions, porosity, cold lap, lack of fusion what a nightmare!!
TRUE!
У нас говорят: "когда коту нечего делать, он яйца лижет".
You could also use a bigger rod or do multiple passes. The flux isn't there just to have something to chip off after welding. It's there to help make a sound weld.
Lol that's what I was thinking to myself also
Ever heard of Texas tig? You use a stick electrode as the arc, and a filler rod, or another stick rod without flux to put even more material the same way you would as tig welding. Kinda common on badly fit joints with huge gaps
BJ CV
0
Флюс это защита от воздушной среды
By the time you have chipped off the flux,sanded the rods down and tacked them together. I've burned 10 rods without any defects! Everyone is a welder till a real welder turns up!
Amen to that..I was a welder since my Early 70s..Retired 2018. Was a B - Pressure welder by trade..
Truth, my thoughts exactly
@@henryherman9113 you from Alberta?
Makes as much since to me as running a lap around the house before walking in the front door. You can do it that way, but why would you?
Could just texas tig it and hold the other rod, no reason to bust all the flux off.
Que bacana, você manja mesmo cara. Grátis, abraços, sucessos
ماشاالله بسیار کار عالی هست که انجام دادین و کاربردی ماشاالله 👏👏👏👏🌹🌹🌹🌹🌹
If this was one of my welders, i would have a serious problem, wasting time instead of using proper techniques and rod size
The worker who worked for me, I've been laid off for a long time
Drewski En Mantıklı Yorum Sen yapmışsın zaman kaybı 👍
Precisely
O 47hd
Да , ты действительно пайщик , я , то думал сварщик .
Обычно даже простой сварщик , таких отверстие напавляет электродом без секретов !
👍👍👍
Вот возьми и наплавь! Да так, чтоб после обработки, раковин не было и сними видео, на эту тему.
I’m not a very good arc welder, but I gas weld quite good and for a time reference I’m over 60 . When I was a young kid my grandfather told me stories about when he worked around boats in the shipyard that this was a common practice . My guess was that was in the 30s 40s maybe even into the 50s when he had his fishing boat .
So we know how the titanic went down?
This is basically the same thing as "Texas TIG" which any welding inspector will tell you never EVER to do.
I remember taking 6010 and 7018 rods (still coated) and essentially using them like TiG filler rods when I was dicking around in welding school. managed to lay some pretty nice looking fat welds but I have no idea if there was proper fusion or not.
Bob Moffat calls that texas tig.
There's basically no chance you had proper fusion. It's like welding vertical down with 7018, the weld face looks pretty but it's full of slag and pores underneath.
И что это было?)) Можно просто проволку отдельно держать если нужно больше наплавки, но в общем это можно сделать одним электродом).
Łał super sekret, a ja całe życie myślałem że średnicę elektrody dobiera się do grubości materiału spawanego (dla mniej kumatych to sarkazm)
Подожди может ролик ещё выпустит где и аппарат сварочный не нужен😆
Гений! Вместо двух электродов заварил... двумя! Добавив себе лишней работы по отбиванию обмазки и сварке электродов.
Explêndido , maravilhoso, es- pe- ta-cu- lar, nunca tinha visto essa técnica aqui no Brasil.
Mas não é no Brasil...
Хорошо шо полностью показан процесс обстукивания электродов.
Обстукивание - это один из секретов
😂😂😂😂😂
@@user-ng9iu7nf1u снятие напряжений в металле - секрет нерастрескивания сварочного шва.
Господи дай автору ролика хоть один электрод чуть потолще.
Я как дилетант сварочного дела, скажу вам одну простую истину.. Это всё пройдёт, когда пройдёшь свой первый километр сварочного шва! 😂
👍
super excellent, I did not know such ways of welding. Thank you！
É possível fazer êste trabalho perfeito com o eletrôdo normal. No último exemplo a superfície foi extremamente lixada para suprimir os defeitos da solda, que houve desgate demasiado da superfície, alterando a medida de espessura da peça. Êsse método não é recomendado, por não oferecer total segurança e eficiência. Coisa de gênio amador.
Damn bro i could have welded the gap with all 3 rods before you finish prepping the rods lol.
The helper will did that peeling
For real I have no idea what the point of that was lol
Excelente 👌 muy bueno gracias por los videos
Mantab kontennya salam sehat salam sukses dari Lampung,jaya jaya jaya 😀👍🙏🙏🙏🙏🙏🙏🙏
С такой пайкой,проще болт или пруток обварить в отверстии,или обычным электродом заплавить
Человек вам показывает, ни как проще, а как качественно это сделать. Таким способом, валы наплавлять ништяк, после проточки, раковин не будет. Для начала, попробуй заплавить отверстие, чтоб после проточки, раковин не было, а потом говори, что проще
It would be better to either use TIG or a proper sized stick. This is going to be an unsafe garbage weld with lots of porosity. Would never pass x-ray or bend testing
I have been welding for 40 years I don't tack weld rod to another I start my weld then use the other rod and use it as thoe I was tig welding works great saves time
Same. This video was dumb as fuck.
Right!
Yes sir I've done that many times
Ah the Texas tig method saw that on tips and tricks channel I still need to try it
Өте жақсы әдіс екен. Өмірде пайдаланармын...
This method can cause flux entrapment in the weld, prevent a proper weld envelope, weld porosity microcracks and weld arc pulling to one side and/or with a high current than required, the electrode is melting/burning and not welding to get a Mechanically sound weld.
Better using a big size electrode for a good outcome.
Apparently once you remove the flux from one rod, there isn't enough on the other to prevent porosity.
can see very obvious. Even after grinding.
Gambiarra do karalho. Kkkkk
Correct!
See how he does, tries very hard: th-cam.com/video/Jh2umGsEYHc/w-d-xo.html
O revestimento de um eletroldo só em poça de fusão não vai tirar a emprureza contida no ar do eletroldo sem revestimento, ou seja pra tampar furo da certo, mais para uma solda resistente e de boa qualidade onde pode se obter força, jamais faria isso usaria uma bitola de eletroldo maior
Sangat kreatif, 👍
Salam kenal dari welder Indonesia👍
Journey man here, it’s called Texas TIG, hold the add rod in your left hand. Strike arc with the right hand and feed as needed.
Journey man…like the band?
I would always just use an extra one like I was tig welding. I of coarse beat all of the Flux off from it 1st. Your way looks like it would be easier though. Cool beans dude. ✌
Два дня 1,5 миллиона просмотров!
Сварщики без работы сидят?))
Судя по соотношению лайков/дизлайков, ни один человек при просмотре этого "не пострадал"
Скорее такие дилетанты, как я. Знаем, где включается сварочный, как ток регулировать, где держак, а где масса, и всё на этом.😁😁😁 А как варить вот по таким роликам учимся.
@@igorluna7255 нечему тут учится. Глупость в ролике
@@miru-mir.. комментарии я тоже читаю))). Здесь подавляющее большинство роликов - чист похайпить, просмотры набрать.
5 дней 3,5миллион просмотр нормул
Excelente explicación Dios te bendiga
Love it! Should find something to weld just to practise this :D
just use a bigger rod. signed- a guy with a degree in welding tech.
I have used a similar but simpler method for years. If you use 6011 rod it works with the coating on. You don't have to weld the rods together just hold one rod in a gloved hand. Make sure you have a glove on. Set up the other rod as you normally would. Use that rod as a torch. Usually a pushing action works best. Hold the other rod like you would for gas or tig welding. it's the filler but also controls the heat. Using this technique you can quickly fill holes or weld the end of a pipe shut.
It should be noted that welds bridging such large gaps are considered sub standard in many applications.
Thanks I'll have to try it.👍🏼
I usually use a gas welding wire with my mig welder to fill in gaps. I'll have to try it your way with the arc welding rod.
That's with sheet metal that I use the welding gas welding rod with the mig welder
Texas tig
I have done that too, but be careful! it is a real good way to get shocked!! lit myself up pretty good more than once...
@@lukewarmwater6412 happened to me too.... was doing a gate repair and didnt have access to heavy enough rods, so Texas tig it was. Had a little thin spot in my glove and got LIT UP.
Metoda starsza od węgla.Dziś już nie trzeba kombinować jak kiedyś.Teraz technika spawania jest dużo lepsza .Wystarczy przemyślany zakup sprzętu i obejdzie się bez kombinacji
Trik seperti itu sangat jarang ada, keren bang lanjutkan
Профессионально!! Реально круто 👍🏻
Быстрей будет без присадки,проще взять в свободную руку присадку,а так норм удачи Вам!
Точно ,я так лет 15 варю и отлично
Так точно! Уже 40 лет только так и робим!
Ржавую жестянку так варил,вместо присадки второй необбитый электрод и через него уже варишь пока металл на железяке не появится))
Можо любым проводом?
Если уж для скорости можно второй рукой подать присадку. А это танцы с бубнами и не какой эфективности
Здравия. Кагда собаке делать не чего..... А так прикольно если надо сделать вид.
Это вообще какая-то дичь несусветная. А в конце он что, присрал медь к стали? А то я так и не понял.
@@PavloKeba , нет это сварочная проволовка, она обмедненая.
Но тут вообще неясно к чему он ПРИСАДКУ к электроду прихватывал. Дуга будет бить то от электрода то от присадки которая будет склонна залипать. Таким макаром обплюешся заливать.
В крайнем случае примотал бы проволочками если уж вторая рука, скажем, ананизмом занята.
This is good if you only have one arm 🤣
Согласен.
Хрень полная.
I've used same call gap rod one rod in welder other free hand use second rod control heat it requires a little skill
The end product was definitely not the same as the hole he plugged. Save yourself the 30 minutes of having to wrestle a grinder and use multiple passes to keep a relatively flat surface so you don't have to spend too much time cleaning it
Just weld in a small slice of bolt or round bar .
the ideal way to produce low quality welds....
👍👍👍👍👍
Exactly 💯
Я обычно электродом без всего завариваю.
👍 если уж совсем большое отверстие нужно закрыть: у болта подходящего шляпку отрезаю и обвариваю.а это конечно дичь.
Bagus itu.... salam Sejahtera Dari Lereng Gunung Slamet saudaraku....th-cam.com/video/5aVIuWFH5xk/w-d-xo.html
Nice . Same as thicker rod . Or three face welding . Need more amps.
Já vou começar a testar
В чем смысл использования обычного и голого электродов? А если просто двумя электродами варить - наплавлять? Для ускорения наплавки без всякого геморроя, обычно просто сварочную проволоку как при газовой сварке добавляют! В некоторых случаях (для наплавки и приварки броневых листов) использовали большие токи и связывали в пачку по 3-6 электродов.
В присадку они видимо варить не умеют, ты прямо мои мысли с языка снял
В точку!
Согласен
А не легче ли просто шайбу подставить меньшего диаметра
@@user-qw5os4ed7f причём тут шайба? Куда ставить, что ставить? У меня бля спросони фантазия не работает. Потому что считает вариат с шайбой очень тупой. Ну в том варианте в котором я в уме представил. Ты же не обьяснил
Это способ для разгульных сварщиков , нормальный сварщик так играться не будет .
You can do the same thing with a regular electrode and backing it up with copper or brass and just fill the hole in without all that bullshit
Es verdad soy soldador de pipetube , esto es absurdo. Saludos desde la argentina
Я вас поддерживаю,30 лет работаю ,а такой ерундой незанималсч
Естественно)
Скорее простой)
Thank You very much,good worked .
I use to place a chunk of brass under the hole in the flange and fill the hole starting from the bottom up in a circular motion.
По мне так проще с отрывам заварить. Ну или взять электрод потолще (4). Чем так извращяться.😃
Согласен.
Ещё проще полуавтоматом
Контент сам себя не запилит )) надо побольше дичи наворотить , чтобы обсуждали .
Sou soldador à bastante tempo, nunca tinha visto isto não, acredito q seja somente pra apresentaçao, penso q inspetor nenhum permitirá q faça isto numa obra não, muito bem feito, ficouotima a fusão, parabens. 👍👍👍👋👋👋
Só pra gambiarra mesmo ! 😅🤣😂🤣👍🏼
JOSE SILVA , TUDO BEM ?!
SABE , EU TAMBEM SOU SOLDADOR A MUITO TEMPO , E NUNCA TINHA VISTO ESSE SISTEMA , LOGICO E CASEIRO .
MAIS BEM ESSE EFEITO E PARA PREENCHIMENTO .
QUANDO EU FAZIA ESSE TIPO DE SERVIÇO , UTILIZAVA UMA VARETA DE FERRO DOÇE , BITOLA DE 5 OU 6 MM. ; PEGANDO COM UMA MÃO E A OUTRA NO ALICATE DE SOLDAGEM .
E COMO FALOU O MINEIRO : PRA FAZER GAMBIARRA 😂😂😂
@@alfredonunez1751 Oiiii ! Boa tarde !!! Falou em gambiarra e já lembrei eu essa semana passada fazendo essa com eletrodo de 2,5 mm e na outra mão um a barra lisa redonda de um 1/4" aço 1020 preenchendo o vão de uma chapa de 1/8" ! (Era de uma churrasqueira feita na correria em plena quarta feira para levar pro mato em um piquenique, gambiarra de última hora ! 😅🤣🤣🤣🤣🤣👍🏼)
KKKKKKKKKK , A COISA E REMEDIAR , NE ? 👍👍👍
JA FIZ DESSAS .
UMA VEZ TINHA ACABADO DE
FAZER UM REBOQUE EM CHAPA 26 ' , E DEI MEIA VOLTA COM O ALICATE DE SOLDA NA MÃO E TROOECEI NO CABO DA SOLDA , E O ELETRODO ENTROU NA LATERAL DO REBOQUE ... AI JA SABE O QUE EU TIVE QUE FAZER , NE ?
😂😂😂
@@alfredonunez1751 Sei, sei sim ! 😆🤣🤣🤣👍🏼
I had a big gap to fill on the bottom of a 24 inch pipe joint(lousy pipe fitter), I mean a big gap. Biggest rod I could get my hands on was 1/8” 7018. So I simply held the stinger in one hand and another rod in the other. Ran the weld kind of like a tig weld. Worked fine.
That's called "Texas TIG" and your weld would have failed an X-Ray or Ultrasound test.
@@BillyWitchDoctorDotCom damn, I haven’t heard about the Texas TiG in a long time!! 😂
الجميل بالنسبة لصاحب القناة أنه حقق الكثير من المشاهدات 28 مليون
In my opinion this is only an interesting job for laymen in the field of Welding.
If you use two 2.5mm rods (one coated and the other not, you will simply have a deposit with the possibility of greater porosity, as with a smaller amount of slag (deposit protective husk) there is a greater possibility of porosity due to the greater inlet. So if you put two 2.5 rods together to do this job, it's much simpler and more practical for you to use just one 4.0mm rod, where your welding machine will work with a lower amperage and you won't have all that immense work in having to keep peeling Electrodes.
P.S. I have been working with Welding processes for 25 years
That was my first thought to, why fuck around with all that when all you need is a bigger rod
Поддерживаю вас, коллеги.
im sure they dont have bigger rod. and the boss said work with what we have.
@@markcarolino9908
Even if they don't have bigger rods there is other processes which is far better work practices than what he did. You try to be a little bit professional, not yard shit
@The Old Husky quindi ho messo dislike !
Não precisa descascar eletrodo, esse trabalho todo, use arame recozido.
👍😀
É o que eu faço.
Precisa sim, pois a casca Do outro pode causar poros ou não fechar a abertura.
@@Diasdelutas quando dissemos que não precisa, é porque usamos arame em adição ao eletrodo.
boa cara aí sim é profisionalismo
Hola amiga soy nueco seguidor y también nuevo en este oficio disculpe mi ignorancia pero para que sirven de esa forma
Vendo e aprendendo agora tem que comprar a maquina de solda...
*Ага*
👍🤣🤣🤣
Haste una con una cubeta de agua y sal
@@juanOrtega-iw1th kkkkkk
Не бери больше в руки металл , не твоё это
Been doing that little trick for 50 years, only we just knocked the Flux off the so called filler rod and fed it in by hand when it was called for. Same with tig, tack the ends and middle together for larder pipe, Say 3 and 4 inch but be careful of cold capping.
Can you explain what is the benefit of doing this? It seems like you could tig weld those holes shut by the time one is done cleaning the rods?
Nice watching from Bangladesh 🇧🇩😮
Nosotros le poniamos un clavo de 4 pulgadas vuando habia una separacion. Pero este sistema es mucho mejor. Gracias por compartir.
По тому как он двигается, есть подозрение что у него большие проблемы....
Я на 100 с вами согласен.Я старик кот.65 лет и то двигаюсь быстрее этого чудака
What does the back side of these improvised welding rig fillers look like?
Very good video, greetings from Indonesia 😀
Ну-и, что это было, зачем, когда можно использовать проволоку присадкой, эффективнее в разы и не заморачиваться, учись студент пока я живой ))
А поры не кого не смущают,после заточки сварочного шва?
Поры нечто имеддж всё !
สุดยอดครับขอบคุณที่ให้ความรู้ครับ
Nice. You can chuck them in a drill to sand them quickly
Alternate video title “ how to produce low quality welds with porosity, slag inclusions, and incomplete penetration.”
This just reduces the ration of flux to filler metal, I suspect that the welding pool isn't fully protected from the atmosphere during the process, this make no sense
My Inspection and Testing teacher damn near had a heart attack when I showed her this video. Her exact words were "that's why buildings collapse"
And she knows cause thats what her code book says
@@richarddavis1413 When she says "The Code" you can *hear* the capital letters.
Hello！We are the manufacturer of laser welding/cutting/cleaning/marking machine, did you need these kinds of equipments in production ? Thanks.
Мало кто знает что и без этих понтов можно было дырку заварить😆
😁😁😁
Простым электродом завариваеться любая дырка Я как то раз даже стенку трубы на гнилом участки формировал электродом
Знающие люди так электроды не отбивают)
You sure do everything the hard way. Just hold the second in your other hand and use it as a "filler" rod like gas or TIG welding.
Flux is important to get a good weld and each rod has the right type and amount of flux on it. You can't mess around with this. That guy hasn't a clue.