Changed mine two weeks ago was definitely bad was quiet for a few weeks now doing it again but only at low idle, and with AC on not sure why it started doing it again not nearly as bad but it is back.
We did that only doesn’t it still if I put it in R or D and idle moving. If I tap gas stops. It was really bad before and there was damage to the balance was worn engine side looks fine
That could be your oil pump failing It has a metal gear that could make noise if it's on its way out. I wouldn't recommend running the engine without having that checked out.
Great job! The difference is definitely audible.
Thank you for this! Changing mine out this weekend, I’ll post my results and link your video.
Did u change it?
nice, thats the part causing all the vibration
The dissection of a balance shaft.......🛠💪😎
Thats awesome info
Buen trabajo primo
Changed mine two weeks ago was definitely bad was quiet for a few weeks now doing it again but only at low idle, and with AC on not sure why it started doing it again not nearly as bad but it is back.
Remove the accessories belt and see if the noise continue
We did that only doesn’t it still if I put it in R or D and idle moving. If I tap gas stops. It was really bad before and there was damage to the balance was worn engine side looks fine
@anthonychappetta if the noise is in the pan like before, likely the new one has failed. Best to warranty replace and recheck. New parts fail
Alternatively, balance shaft delete!!!! More lower end power!
How do u do that?
I have a similar sound , and on cold start I get an oil pressure light. You think that’s my issue ?
That could be your oil pump failing It has a metal gear that could make noise if it's on its way out. I wouldn't recommend running the engine without having that checked out.
I think the bigger bolts go troq to 32-34ftl lbs
@@joell5093 do what makes you happy
Should have deleted the shafts. Bump in oil pressure and the motor will be a touch more responsive
Maybe the customer should have went back with a OEM part.
Неправильно поставил метку. Эти точки должный находится на вверху против линии с низу корпуса..
Плюс метка ГРМ поставишь на ноль