Hi mate I use a sump off a bit 1.9 t5 transporter and it was close If I remember right I use a hammer and gently put a little dent in the back of the sump to clear the driveshaft flange
liked subscribed and only watched 5 times so far great information can't wait for next update can I ask what gauge of steel you used to fabricate the mountings and did you work out an angle or just eyeball it?
Hi sorry for the late reply I used 6mm plate for some of the main fixing plate and the reinforcing and some box tube think it was 40x80mm and a pice of 2inxh 5mm tube with 2 10mm plate welded and stepped on top of it with a key way to lock it into the og mount 😊 As for working out the position I made a jig that I built the mount off of 😊
@@TheADHDmechanic hi Terry thank you for the reply. I thought you had uprated the pd engine to fit t4. I’m after more power now from mine. Do you know which components I can replace. Inlet turbo etc. I’m going for a darkside intercooler anyway. Sure it’s easy enough to get extra power by swapping these items. Passat pd150 parts??? Cheers
Hi yer the pd engine are almost the same it’s just the injectors and the turbo that holds them back So a set of pd150 injectors and a nice big turbo and the pd 150 head bolds or a set of updated head holts and a strait pipe I tuned a mk4 golf up the other day which had a pd150 engine in it and I got 220bhp 😀
@@edwardpayne4150 right I’d say u would want a turbo off a pd150 from a mk4 golf or a a3 turbo will be a gt17 and u would want a egr delete pipe for the manifold that will get u close to 200 bhp try and get a hybrid gt17 or a gt20
@@TheADHDmechanic evening, have you completed you jig yet as may be interested in purchasing some mounts from yourself in the very near future. As I will be starting a conversion soon
Great advise there mate
I'm thinking of doing conversion aswell
You are mint for sharing the info with us because i want to do this with mine so i subscribed
i think to make this swap.
have you run without problems ??? is the gearbox strong for this engine ????
U should make a couple of mounts I reckon they deffo sell
What engine mounts bracket can i use to do this swap , or do i need to make custom ones ?
it was converted from what to what,and why? thanks
Is there a reason why you didn't use original vnt turbo ???
what engine code did you use and why did you have to make a custom mount?
Hello mate am going to be doing this myself, what engine mount did you use for the driver side on the pd engine?
Wenn die Wanne von einem VW T5 stammt und das Originalgetriebe von einem T4, ist es dann notwendig, die Wanne zu schneiden und zu schweißen???
Looks great👍 we’ve recently done this exact swap in our own t4 and its brilliant.
Would love to do this to mine I'm not afraid of fabrication but wiring is no no for me was it easy
Alright I'm working on it now I can't get the sump to fit on after mounting the gearbox, any advice you can give will be greatly appreciated
Alright I'm working on it now I can't get the sump to fit on after mounting the gearbox, any advice on how you fit it on would be really appreciated
Hi mate I use a sump off a bit 1.9 t5 transporter and it was close
If I remember right I use a hammer and gently put a little dent in the back of the sump to clear the driveshaft flange
Are you going to do a video on the wiring loom
I will be doing one on the loom 😊
When I did the loom iv just tagged the plugs that I needed and the cut it all back til iv just had a very small piggy back loom 😊
Hi, what is the MKB of the 1.9 TDI enginge?
liked subscribed and only watched 5 times so far great information can't wait for next update can I ask what gauge of steel you used to fabricate the mountings and did you work out an angle or just eyeball it?
Hi sorry for the late reply I used 6mm plate for some of the main fixing plate and the reinforcing and some box tube think it was 40x80mm and a pice of 2inxh 5mm tube with 2 10mm plate welded and stepped on top of it with a key way to lock it into the og mount 😊
As for working out the position I made a jig that I built the mount off of 😊
Salut
Est ce que je peut monter un moteur 5 cylindres sur un transporter t4 1.9
Merci
A future mod for me. What's the wiring like to do? 🤔
Less than 10 wires to get the engine running lots of info out there on the web
Hi
What about gearbox?
Is there a follow up video I've missed? 🤔👍
hi mate yer there will be a follow up video soon in the next week or 2 max 🙂
Are you able to this conversion to my t5 1.9. Cheers
Hi if u have a t5 1.9 it should already be fitted with a pd engine 😀
@@TheADHDmechanic hi Terry thank you for the reply. I thought you had uprated the pd engine to fit t4. I’m after more power now from mine. Do you know which components I can replace. Inlet turbo etc. I’m going for a darkside intercooler anyway. Sure it’s easy enough to get extra power by swapping these items. Passat pd150 parts??? Cheers
Hi yer the pd engine are almost the same it’s just the injectors and the turbo that holds them back
So a set of pd150 injectors and a nice big turbo and the pd 150 head bolds or a set of updated head holts and a strait pipe
I tuned a mk4 golf up the other day which had a pd150 engine in it and I got 220bhp
😀
@@TheADHDmechanic thank you. Which turbo would you suggest. So my inlet from my t5 is same as Passat 130 or golf gtd. good work
@@edwardpayne4150 right I’d say u would want a turbo off a pd150 from a mk4 golf or a a3 turbo will be a gt17 and u would want a egr delete pipe for the manifold that will get u close to 200 bhp try and get a hybrid gt17 or a gt20
Hi ,would you be able to make engine side bracket for me?
Hi il will be making them but I need to make a jig first 😊
But when I start making them il put something on hear to let u no 😊
@@TheADHDmechanic evening, have you completed you jig yet as may be interested in purchasing some mounts from yourself in the very near future. As I will be starting a conversion soon
Hi mate, what gearbox are you using ??
Hi mate I’m using the original t4 gearbox 😊
He gets a sub because I also have ADHD!